Transcript
Pike
F-032
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description Fast VGA camera, high quality, IEEE 1394b FireWire, 208 fps The Pike F-032B/C is a very fast VGA camera with premium image quality and a fast FireWire IEEE 1394b interface. It is equipped with a OnSemi KAI-0340 CCD sensor. At full resolution, it runs 208 fps. Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. The Pike F-032B/C is an excellent motion analysis camera. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth
F-032 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 640 (H) × 480 (V) OnSemi KAI-0340 CCD Progressive 7.4 µm x 7.4 µm C-Mount, CS-Mount 208 fps 14 bit 64 MByte Output 8-14 bit bit
Pike Mono modes Color modes RGB Raw modes
F-032 Mono8, Mono12, Mono16 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-Noise Binning Mode Smear reduction Shading correction AOI, separate AOI for auto features Binning
• • • • • • • • • • • •
Decimation Auto gain (manual gain control: 0 to 22 dB) Auto exposure (18 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count etc.) Storable user sets
Technical drawing
Applications The Pike F-032B/C combines a very high frame rate of 208 fps with elaborate image pre-processing functions and a fast IEEE 1394b FireWire port. The modular design of the Pike provides many opportunities for customization. This Pike camera is especially suited for: • • • • • • • • • •
Applications which require high frame rates and outstanding image quality OEM applications (modular concept) Sports, motion studies 3D recordings of still and moving objects 3D scanning Science and research Healthcare Multimedia and entertainment ITS (Intelligent traffic solutions) Long cable lengths, 400 meters and more (fiber version)
Pike
F-100
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description Premium 1 Megapixel FireWire camera with very high frame rates The Pike F-100B/C is equipped with a OnSemi KAI-1020 CCD sensor. At full resolution, it runs at 60 fps (Mono8/Raw8). Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. The camera includes extraordinary image pre-processing functions like the High SNR mode (up to 24 dB better signal-to-noise ratio). Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth
F-100 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 1000 (H) × 1000 (V) OnSemi KAI-1020 CCD Progressive 7.4 µm x 7.4 µm C-Mount 60 fps 14 bit 64 MByte Output 8-14 bit
Pike Mono modes Color modes RGB Raw modes
F-100 Mono8, Mono12, Mono16 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-Noise Binning Mode Smear reduction Shading correction AOI, separate AOI for auto features Binning
• • • • • • • • • • • •
Decimation Auto gain (manual gain control: 0 to 22 dB) Auto exposure (43 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count etc.) Storable user sets
Technical drawing
Applications The Pike F-100B/C is a 1 Megapixel camera for sophisticated requirements. OEM customers profit from its modular design, which provides many opportunities for customization. For Healthcare and Life science applications, a white housing (medical design) is available (this applies to all cameras by Allied Vision Technologies). Pike cameras are especially suited for: • • • • • • • •
Applications which require high frame rates and outstanding image quality OEM applications (modular concept) 3D recordings Science and research Healthcare and sports Multimedia and entertainment ITS (Intelligent traffic solutions) Long cable lengths, 400 meters and more (fiber version)
Pike
F-1100 • • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description 11 Megapixel premium camera – 35 mm CCD sensor OnSemi KAI-11002 The Pike F-1100B/C is an 11 Megapixel IEEE 1394b camera with excellent image quality. It can be operated both with single tap and dual tap mode. At full resolution, it runs up to 4.9 fps (dual tap). Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth Mono modes
F-1100 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 4008 (H) × 2672 (V) OnSemi KAI-11002 CCD Progressive 9 µm x 9 µm F-Mount 5 fps 14 bit 256 MByte Output 8-14 bit Mono8, Mono12, Mono16
Pike Color modes RGB Raw modes
F-1100 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 380 g Body dimensions (L × W × H in mm) 142.8 × 59 × 59 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-noise binning mode Smear reduction Shading correction Defect pixel correction AOI, separate AOI for auto features Binning
• • • • • • • • • • • •
Decimation Auto gain (manual gain control: 0 to 24 dB) Auto exposure (129 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications The Pike F-1100B/C is ideal for high-precision applications. Its excellent image quality can be enhanced by numerous image pre-processing functions. It is also available with M42-Mount or with M58-Mount. This camera is well-suited for: • • • • • • • • •
Science and research Metrology Document scanning (replaces DSLR cameras - no mechanical shutter, long life time) Healthcare and medical applications Industrial inspection at high resolutions Aerial imaging Very demanding OEM camera applications ITS (Intelligent traffic solutions) Long cables - 400 meters and more without additional repeaters (fiber version)
Pike
F-145
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description IEEE 1394b camera with Sony ICX285 sensor – 30 fps The Pike F-145B/C is equipped with one of the finest sensors, Sony's EXview HAD CCD ICX285. Furthermore, various real-time pre-processing functions enhance its exceptional image quality. At full resolution, it runs 30 fps. Higher frame rates can be reached by a smaller AOI, binning (b/w), or subsampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing Also available: Pike F-145B/C (-15fps) version - lower framerate, enhanced image quality
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM)
F-145 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 1388 (H) × 1038 (V) Sony ICX285 CCD Progressive 6.45 µm x 6.45 µm C-Mount 30 fps 14 bit 64 MByte
Pike
F-145 Output Bit depth 8-14 bit Mono modes Mono8, Mono12, Mono16 Color modes RGB RGB8 Raw modes Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-Noise Binning Mode Smear reduction Shading correction
• • • • • • • • • • • • • •
AOI, separate AOI for auto features Binning Decimation Auto gain (manual gain control: 0 to 32 dB) Auto exposure (39 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications The well-engineered sensor Sony ICX285 in combination with the diverse image pre-processing functions and the modular design of the Pike F-145B/C result in a camera with an exceptional high performance. It is the perfect choice for sophisticated applications, especially with low light. The Pike F-145B/C is especially suited for: • • • • • • • • •
Applications which require the highest image quality even with low light OEM applications (modular concept) Motion studies 3D recordings of still and moving objects Science and research Healthcare and sports Multimedia and entertainment ITS (Intelligent traffic solutions) Long cable lengths, 400 meters and more (fiber version)
Pike
F-1600 • • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description 16 Megapixel premium camera – 35 mm CCD sensor OnSemi KAI-16000 The Pike F-1600B/C is a 16 Megapixel IEEE 1394b camera with exceptional image quality. It can be operated both with single tap and dual tap mode. At full resolution, it runs up to 3.1 fps (dual tap). Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth Mono modes
F-1600 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 4872 (H) × 3248 (V) OnSemi KAI-16000 CCD Progressive 7.4 µm x 7.4 µm F-Mount 3 fps 14 bit 256 MByte Output 8-14 bit Mono8, Mono12, Mono16
Pike Color modes RGB Raw modes
F-1600 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 380 g Body dimensions (L × W × H in mm) 142.8 × 59 × 59 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-noise binning mode Smear reduction Shading correction Defect pixel correction AOI, separate AOI for auto features Binning
• • • • • • • • • • • •
Decimation Auto gain (manual gain control: 0 to 24 dB) Auto exposure (636 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications The Pike F-1600B/C is made for high-precision applications which require highest attention to detail. Its excellent image quality can be enhanced by several image pre-processing functions. It is also available with M42-Mount or with M58-Mount. This camera is well-suited for: • • • • • • • • •
Science and research Metrology Document scanning (replaces DSLR cameras - no mechanical shutter, long life time) Healthcare and medical applications Industrial inspection at high resolutions Aerial imaging Very demanding OEM camera applications ITS (Intelligent traffic solutions) Long cables - 400 meters and more without additional repeaters (fiber version)
Pike
F-210
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description HDTV camera with video frame rate - 2 Megapixels The Pike F-210B/C is equipped with a OnSemi KAI-2093 CCD sensor, and it features smart real-time functions. At full resolution, it runs up to 31 fps. Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth Mono modes
F-210 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 1920 (H) × 1080 (V) OnSemi KAI-2093 CCD Progressive 7.4 µm x 7.4 µm C-Mount 31 fps 14 bit 64 MByte Output 8-14 bit Mono8, Mono12, Mono16
Pike Color modes RGB Raw modes
F-210 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-noise binning mode Smear reduction Shading correction AOI, separate AOI for auto features Binning Decimation
• • • • • • • • • • •
Auto gain (manual gain control: 0 to 22 dB) Auto exposure (43 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications The Pike F-210B/C suits for applications which require the highest quality in HDTV resolution (1920 x 1080) at video frame rates. Besides the excellent image quality, its flexibility makes it suitable for many applications. The fiber version supports cable lengths of 400 meters and even more without any additional repeaters. Pike cameras are especially suited for: • • • • • • • •
Entertainment, movie pre-production, video recording OEM applications (modular concept) Motion studies Science and research Healthcare and sports Event documentation ITS (Intelligent traffic solutions) Long cable lengths, 400 meters and more (fiber version)
Pike
F-421
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description 4 Megapixel camera with OnSemi KAI-4022 type 1.2 sensor – high resolution, low noise The Pike F-421B/C is equipped with a OnSemi HAD CCD sensor type 1.2. The reason for this large sensor format is the goal to achieve high resolution images with low noise. The sensor has a wide pixel pitch of 7.4 μm. At full resolution, the camera runs up to 16 fps. Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth
F-421 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 2048 (H) × 2048 (V) OnSemi KAI-4022 CCD Progressive 7.4 µm x 7.4 µm C-Mount 16 fps 14 bit 64 MByte Output 8-14 bit
Pike Mono modes Color modes RGB Raw modes
F-421 Mono8, Mono12, Mono16 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-noise binning mode Smear reduction Shading correction AOI, separate AOI for auto features Binning
• • • • • • • • • • • •
Decimation Auto gain (manual gain control: 0 to 22 dB) Auto exposure (70 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications Equipped with a large sensor format (type 1.2), the Pike F-421B/C is the perfect fit for low-light applications. It is distinguished by high-resolution images and an extraordinary image quality with very low noise. The smart pre-processing features of the Pike even enhance the image quality. This Pike camera is especially suited for: • • • • • •
Applications which require the highest image quality even with low light OEM applications (modular concept) Microscopy Science and research ITS (Intelligent traffic solutions) Long cable lengths, 400 meters and more (fiber version)
Pike F-505
• • • •
Versatile IEEE 1394b camera Advanced feature set Many variants High frame rates
Description 5 Megapixel premium camera with numerous image pre-processing functions The Pike F-505B/C is equipped with a renowned Sony Super HAD CCD sensor and has an excellent image quality. At full resolution, it runs up to 15 fps. Higher frame rates can be reached by a smaller AOI, binning (b/w), or sub-sampling. Options • IEEE 1394b connectors: 2 x copper (daisy chain) or 1 x GOF, 1 x copper, Hirose power: out • Various IR cut/pass filters, various lens mounts • Angled head, white medical housing
Specifications Pike Interface Resolution Sensor Sensor type Cell size Lens mount Max frame rate at full resolution ADC Image buffer (RAM) Bit depth Mono modes
F-505 IEEE 1394b - 800 Mb/s, 2 ports, daisy chain, fiber optic (GOF) optional 2452 (H) × 2054 (V) Sony ICX625 CCD Progressive 3.45 µm x 3.45 µm C-Mount 15 fps 14 bit 64 MByte Output 8-14 bit Mono8, Mono12, Mono16
Pike Color modes RGB Raw modes
F-505 RGB8 Raw8, Raw12, Raw16 General purpose inputs/outputs (GPIOs) Opto-isolated I/Os 2 inputs, 4 outputs RS-232 1 Operating conditions/dimensions Operating temperature +5 °C to +50 °C Power requirements (DC) 8 V to 36 V Power consumption (@12 V) 4W Mass 250 g Body dimensions (L × W × H in mm) 96.8 × 44 × 44 (including connectors) Regulations CE (2004/108/EC), RoHS (2011/65/EU), WEEE (2002/96/EC), FCC Class B
Features • • • • • • •
High SNR mode (up to 24 dB better signal-to-noise ratio) Low-noise binning mode Smear reduction Shading correction AOI, separate AOI for auto features Binning Decimation
• • • • • • • • • • •
Auto gain (manual gain control: 0 to 24 dB) Auto exposure (27 µs to 67 s) Auto white balance LUT (look-up table) Hue, saturation, color correction Reverse X Deferred image transport Trigger programmable, level, single, bulk, programmable delay Sequence mode (changes the camera settings on the fly) SIS (secure image signature, time stamp for trigger, frame count) Storable user sets
Technical drawing
Applications The Pike F-505B/C is perfectly suited for very demanding applications. The brillant image quality can be enhanced by its image pre-processing functions. Due to the modular design, customization is easy and cost-effective. This camera fits especially for: • • • • • • •
Science and research Microscopy Healthcare and medical applications (white housing available) Multimedia, entertainment and sports Very demanding OEM camera applications ITS (Intelligent traffic solutions) Long cables - 400 meters and more without additional repeaters (fiber version)
