Detailansicht Page 1 Of 1

Transcript

Detailansicht Page 1 of 1 Detailansicht 15.91.639 Anzahl Zellen Material Oberfläche Bulgin-No. Bauart Typ Brennklasse Gehäuselänge Lieferform Besonderes Spezifikationen Liefertermin Preisstaffelung Batteriehalter für 9V Batterie / Löt- /Steck- und LP-Anschlüsse 1 Polyamid 6.0-gv 25% schwarz BX0033 Kunststoff-Halter 9V-Block UL94V-O 58,70 LP und Flachsteck/Lötanschluss Ohne LP-Anschlüsse = 15.91.632 RoHS konform Details... sofort lieferbar 50 bis 99 Stück 1,00 EUR per Stück 100 bis 249 Stück 90,50 EUR per 100 Stück 250 bis 499 Stück 88,00 EUR per 100 Stück Ab 500 Stück 85,60 EUR per 100 Stück http://www.ettinger.de/Art_Detail.cfm?ART_ARTNUM=15.91.639&CFID=5440&C... 18.07.2008 Detailansicht Page 1 of 1 Spezifikationen Polyamid 6.0 - gv Zugfestigkeit Reissdehnung Elastizitätsmodul / Zug ISO 527 / DIN 53455 165 MPa trocken ISO 527 / DIN 53455 < /= 3 trocken ISO 527 / DIN 53457 7000 MPa trocken Kerbschlagzähigkeit ISO 179 / DIN 53453 10-15 kj/m2 Kugeldruckhärte ISO 20391/DIN 53456 215 Mpa trocken Schmelztemperatur Kofler Methode 215-225°C Wärmeformbeständigkeit ISO 75 / DIN 53461 >= 200°C trocken max. Gebrauchstemp. IEC 216/ DIN 53446 <= 190°C kurzzeitig Dichte Verstärkungsanteil Brennbarkeit ISO 1183/ DIN 53479 1,12-1,14 g/cm'3 DIN 53395 25 % glasfaser IEC 707 / UL94-HB ohne gelbe Karte [schliessen] http://www.ettinger.de/Art_Spezifikation.cfm?ART_MATERIALCODE=PAGV 18.07.2008 Battery Holders B A T T E R Y H O L D E R S Introduction: BS397, IEC 86-1 Maximum Battery Size Max. Battery size To Fit Holders Mounting /2 AA Ø14.9 x 25.1 BX0031 PCB/Base AAA (RO3) Ø10.5 x 44.5 BX0034 PCB/Base BX0035 PCB/Base BX0011/1, BX0012/1, BX0013/1, BX0027 Panel BX0036 PCB/Base BX0001/1, BX0002/1 BX0003/1 Panel BX0037 PCB/Base BX0016, BX0017, BX0018 Panel BX0033 PCB/Base BX0023, BX0026 Panel 1 AA (R6) Ø14.5 x 50.5 C (R14) Ø26.2 x 50 D (R20) Ø34.2 x 61.5 PP3 (6R61) W26.5 x D17.5 x H48.5 Note: As batteries from different manufacturers may vary slightly in size, Dimensions & Drawings are approximate only. 1/2 AA AAA (R03) AA (R6) C (R14) D (R20) PP3 (6R61) All Bulgin Battery Holders have polarity clearly marked 8 Fax: 0181 507 2691 email: [email protected] Pa n e l M o u n t i n g B A T T E R Y BX0011/1 H O L D E R S BX0027 BX0001/1 Data BX0011/1, BX0012/1, List No. BX0013/1 BX0027 BX0001/1, BX0002/1, BX0003/1 Battery/Cell Type: AA (R6) AA (R6) C (R14) No. Cells: BX0011/1 - 1 cell, BX0012/1 - 2 cells, BX0013/1 - 3 cells. 4 cells BX0001/1 - 1 cell, BX0002/1- 2 cells, BX0003/1 - 3 cells Terminations: 2.8 series tabs/solder tags. 4 solder tags. (can be wired in series or in pairs). 2.8 series tabs/solder tags. Operating Temp. Range: –30˚C to +50˚C. –30˚C to +70˚C. –30˚C to +70˚C. Mouldings: Glass Filled Nylon & Polystyrene. Glass Filled Nylon Nylon & Glass Filled Nylon. Contacts: Brass, Tin Plated. Nickel Silver, clean. Phosphor Bronze, Tin Plated. Nickel Silver, clean. Nickel Silver, clean. Brass, Tin Plated. Features: Bayonet cap with coin slot. Body may be supported by rear bracket. Removable loading/latching magazine. Screw on cap. Recommended torque for panel ring 1.13-1.7Nm (10-15 lbf.in). www.bulgin.co.uk Tel: 0181 594 5588 9 Battery Holders B A T T E R Y BX0016 H O L D E R S BX0023 BX0026 Data List No. BX0016, BX0017, BX0018 BX0023 BX0026 Battery/Cell Type: D (R20) PP3 (6R61) PP3 (6R61) No. Cells: BX0016 -1 cell, BX0017 - 2 cells, BX0018 - 3 cells 1 cell 2 cells Terminations: 4.8 series tabs/solder tags. Solder tag. Solder tag. Operating Temp. Range: –30˚C to +70˚C. –30˚C to +70˚C. –30˚C to +70˚C. Mouldings: Nylon & Polycarbonate. Glass Filled Nylon. Glass Filled Nylon. Contacts: Brass, Nickel Plated. Phosphor Bronze, Tin Plated. Phosphor Bronze, Tin Plated. Features: Bayonet cap with coin slot. Body may be supported by rear bracket. Removable loading magazine. Removable loading magazines. 10 Fax: 0181 507 2691 email: [email protected] Pa n e l M o u n t i n g NEW B A T T E R Y BX0031 H O L D E R S BX0034 BX0035 Data List No. BX0031 BX0034 BX0035 AAA (R03) AA (R6) Battery/Cell Type: 1/ 2 No. Cells: 1 cell 1 cell 1 cell Terminations: P.C. spills Dual connections, P.C. spills & 2.8 series tabs/solder tags. (P.C. spills may be removed if required). Dual connections, P.C. spills & 2.8 series tabs/solder tags. (P.C. spills may be removed if required). Operating Temp. Range: –30˚C to +70˚C. –30˚C to +70˚C. –30˚C to +70˚C. Mouldings: Glass Filled Nylon. Glass Filled Nylon. Glass Filled Nylon. Contacts: Nickel Silver, clean. Nickel Silver, clean. Nickel Silver, clean. Interlocking device for multiple assemblies. Interlocking device for multiple assemblies. Features: www.bulgin.co.uk AA Tel: 0181 594 5588 11 PCB and Base Mounting B A T T E R Y BX0036 H O L D E R S BX0037 BX0033 Data List No. BX0036 BX0037 BX0033 Battery/Cell Type: C (R14) D (R20) PP3 (6R61) No. Cells: 1 cell 1 cell 1 cell Terminations: Dual connections, P.C. spills & 2.8 series tabs/solder tags. (P.C. spills may be removed if required). Dual connections, P.C. spills & 2.8 series tabs/solder tags. (P.C. spills may be removed if required). Dual connections, P.C. spills & 2.8 series tabs/solder tags. (P.C. spills may be removed if required). Operating Temp. Range: –30˚C to +70˚C. –30˚C to +70˚C. –30˚C to +70˚C. Mouldings: Glass Filled Nylon. Glass Filled Nylon. Nylon. Contacts: Nickel Silver, clean. Nickel Silver, clean. Nickel Silver, clean. Features: Interlocking device for multiple assemblies. Interlocking device for multiple assemblies. 12 Fax: 0181 507 2691 email: [email protected]