Transcript
“Patented Antenna Solutions”
2.5-2.7GHz 16dBi Panel Antenna for ARC IES™, Integrated Enclosure Solution ♦
High gain, low cost circuit design
♦
Low profile and rugged design for outdoor use
♦
US Engineered
♦
Manufactured under strict US quality control procedures
♦
Fits with ARC’s IES™, Integrated Enclosure Solution SOLD SEPARATELY— Part # ARC-IE1001K02 or ARC-IE2000K01 (Gen II); both include ARC ABS™, Articulating Bracket Solution
♦
Custom Enclosures Available
Mechanical and Environmental Specifications
Electrical Specifications Frequency Range
2.5-2.7GHz
Gain
16.3dBi typical
Aluminum
3dB Beamwidth Vertical/Horizontal
23deg/27deg
Radome
UV stabilized ABS plastic, gray
Polarization
Wind Survivability
125mph (201kph)
Single linear, horizontal or vertical
Wind Load
0.75ft² (0.069m²)
VSWR
≤1.5:1 typical, 1.7:1 max
Operating Temperature Range
-49°F to +149°F (-45°C to +65°C)
Front-to-Back Ratio
≤30 dB
Cross Polarization
≤20 dB
Pole Mount Diameter Range
0.75in to 3.0in (19mm to 76mm)
Power Rating
6 watts
Impedance
50 ohms
Lightning Protection
DC ground
Connector Type
R/A SMA Jack
Length x Width x Depth
10.4in x 10.4in x 0.49in (264.6mm x 264.6mm x 12.45mm)
Weight
1.3lb (0.61kg)
Backplane
Ordering Information Part #
Description
ARC-IA2516B01
2.5-2.7GHz 16dBi, R/A SMA Jack
RF Patterns Vertical Cut, typ.
RF Patterns Horizontal Cut, typ. 90
0
0
0 30
Shipping Information
-5
-10
-10
60
Sizes and Weights
Description
12.75n x 10.5in x 10.5in (324mm x 267mm x 267mm) 15.5lb (7.0kg)
Bulk Pack, 10 antennas divided in an overpack box
-20
-25
-25
-30
270
240
150
210
180
30
-15
-20
120
Rev 091808
150
300
-15
90
60
120
330 -5
-30
180
0
210
330
240
300
270
www.antennas.com
Don’t see what you need? Contact us to discuss alternate configurations.
Specifications subject to change without notice.
ARC Wireless Solutions, Inc. ● 10601 I-70 Frontage Road N ● Wheat Ridge, CO 80033-2660 ● Phone 303.421.4063 ● Toll Free 800.508.6532 ●
[email protected]
