Transcript
Specifications
Detonator TM
1
The Detonator is an optional, dedicated remote control tool for easy command of the Atomic strobe's flash rate and intensity. It includes "blinder effect" and "single flash" detonator buttons as well as a chase/synchronization toggle switch. Easy to set up and operate, the Atomic Detonator requires no external power source. · Dedicated remote control for Atomic strobe series · Fader-controlled flash rate and intensity · Single button for Detonator blinder effect · Separate button for single flash and flash sync · Chase effect operation with multiple units · No external power necessary · Easy set-up and operation
Physical
Length: 142 mm (5.6 in.) Width: 113 mm (4.4 in.) Height: 75 mm (3.0 in.) Weight: 0.7 kg (1.5 lbs.)
Playback
Run/stop toggle Strobe rate: 0 - 25 Hz (50 Hz mains), 0 - 30 Hz (60 Hz mains) Intensity: 0 - 100% Chase/sync toggle for use with multiple fixtures Single flash Flash synchronization Blinder effect: Triggering with variable intensity
Construction
Housing: Steel Color(s): Black
Connections
DC power input: 3 volt drawn from master fixture via control cable Control signal output: 3-pin locking XLR
Approvals
EU safety: EN 60950 EU EMC: EN 55103-1, EN 55103-2
Included Items
5 m (16.4 ft.) data cable, 3-pin XLR: P/N 11820008
Ordering Information
Detonator, Atomic Remote Control: P/N 90760020
Published on: 9 Dec 2013. © 2001-2013 Martin Professional Aps. Specifications subject to change without notice
Olof Palmes Allé 18
8200 Århus N
Denmark
Tel. +45 87 40 00 00
Fax +45 87 40 00 10
