Preview only show first 10 pages with watermark. For full document please download

Dev 8120 Managed Lnb Redundant Power Supplies

   EMBED

Share

Transcript

DEV 8120 Managed LNB Redundant Power Supplies General Description: The DEV 8120 Series redundant power supply provides a centralized power source for up to 54 LNBs in a 3 RU chassis. Dual monitoring outputs on the front of the cards allow monitoring for selected channel. The redundant power supplies can be monitored and controlled via web interface and SNMP. Other configurations include 16 and 32 path models. Features & Benefits: • Bias Tee for up to 54 channels integrated into a 3 RU chassis • Available dual channel Bias Tee modules • Dual monitoring output at the front side for monitoring of each channel • Bias current monitoring • Comprehensive web interface • Remote control protocol support via SNMP • Redundant power supplies DEV 8120 Specifications:* Operating Frequency: Configuration: DEV 8120 700-2300 MHz Impedance: Connectors: Redundant Power Supply Voltage: Power Consumption: Output Current: 75 Ω and 50 Ω F-Type or SMA 50 Ω 100…240 VAC Supplied by Two Different Lines or (-48 - (-56) VDC supplied by two different lines) 27 Slots (54 path max.) <600 VA Alarm: Remote Control: Mechanical: Weight: 15+3/-0 V; Max 500 mA per Channel, Short-Circuit Proof (if all 54 paths powered; average current not to exceed 320 mA per path for redundancy) Via LED and Remote Interface Ethernet (RJ-45), Web Interface and SNMP; Serial Interface RS 232 (SubD-9) 3 RU: 5.25” H x 18.5” D x 19” W 19.8 lbs (empty chassis) Environmental: ETS 300019 Part 1-3 Class 3.1 Certifications: CE *Specifications may vary with connector type. See individual specification sheet for specific performance data. (800) 839-3658 • (724) 349-1412 • www.quintechelectronics.com © 2016 Quintech Electronics & Communications, Inc. All products and specifications are subject to change without notice. 23