Preview only show first 10 pages with watermark. For full document please download

Dfab 3dprinting Submission Form - Cmu-dfab

   EMBED

Share

Transcript

dFAB 3Dprinting submission form 1_andrew id 2_date submitted 3_email yyyymmdd andrew id _ printer _ 4_stl file name yyyymmdd andrew id file name must be this format. example: 20141125_andyc_projet360_mm _ units printer units 5_printer Dimension [abs] Projet360[powder] Objet30[resin] 6_units inches millimeters X(width) Y(depth) Z(height) 7_max price [$$] approved: 8_At user’s risk? by checking this box you accept the risk of a broken model. Any models with thicknesses below those listed for the printer are printed “at the user’s risk.” dFAB will not reprint or refund the cost of broken models that don’t meet the minimum wall and column thicknesses listed in the 3d printing policies. 9_I have read the above and understand its terms. student’s signature 10_place the stl file in a folder named with your andrew ID in the 3d Printing temp. .030 inch minimum wall thickness FINISH matte elevation plan Objet30 [resin] 11.5” x 7.5” x 5.8” plan plan elevation elevation 11_draw the approximate size of your model in the appropriate boxes below. grid units are 1 inch by 1 inch. Projet360 [powder] 10” x 8” x 8” .125 inch minimum wall thickness Dimension [abs] 8” x 8” x 12” .040 inch minimum wall thickness glossy area below for dfab use only stl approved job sent model support job removed job picked up job billed date/time staff name estimate model actual support