Preview only show first 10 pages with watermark. For full document please download

Dfl-2525r00-08 Product Sheet

   EMBED

Share

Transcript

Driver Specification Sheet Model No: DFL-2525R00-08 EVT1 Rev: Product Line: Tymphany Last Update: 2016-05-30 19:55:16 Product Description This 1inch diaphragm inch exit compression driver is a cost effective solution for use in professional sound reinforcement systems. The pure titanium diaphragm ensures solid and controlled vibration to the highest frequencies. The phase plug was studied extensively to optimize the HF level, and ensures a wide smooth response characteristic. The use of high quality ferrofluid combined with extensive verification testing has resulted in a transducer which is extremely reliable. PR Mechanical Drawing Revc Zmin Le Fs Qms Qes Qts F [email protected]/1M db@1W/1M Gh Xmax FF Kg Frequency and Impedance Response Ohms Ohms mH Hz 5.41 Fs/Qts dB dB mm mm 0.96 6.28 6.71 0.12 1597.12 10.31 3.55 450.02 105.16 104.4 4 1.4 APGL11 5.0% 7.5% 15% +/- 1.0db +/- 1.0db Energy Bandwidth Product Moving Mass Suspension Compliance Effective Cone diameter Effective Piston Area Effective Volume Motor Force Factor Motor Efficiency Factor Voice coil former Material Voice coil inner diameter Rated Noise Power Test Spectrum Bandwidth Driver Size EBP Mms Cms D Sd Vas BL ß VCfm VCd P 3k Hz~20k Hz Inch (1/Qes)*fs g um/N cm cm^2 L Tm (T*M^2)/Ohms Y AR DC Resistance Minimum Impedance Voice Coil Inductance Resonant Frequency Mechanical Q Factor Electrical Q Factor Total Q Factor Ratio Fs/Qts Half Space Sensitivity @2.83V Half Space Sensitivity @1W/1M Gap Height Maximum Linear Excursion Ferrofluid Type Driver Mass IN IM EL Specifications Tymphany HK LTD Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong E-mail: [email protected] mm W 1 in 0.3 29 3 7.1 0 2 0.6 Kapton 25.4 25