Transcript
Driver Specification Sheet
Model No::
DFM-2535R00-08
1
Rev:
Product Line: Tymphany
Last Update: 2017-04-25 14:32:09
Product Description This 1.4 inch diaphragm 1inch exit compression driver is for use in high quality sound reinforcement systems. The polyimide surround allows reliable operation in 2 way systems with lower crossover points. The titanium diaphragm is coated with a light, thin layer of unique damping material giving the driver an unusually smooth sound. All of the materials resist environmental factors of heat, vibration and aging ensuring many years of stable performance.
PR
Mechanical Drawing
Revc Zmin Le Fs Qms Qes Qts F
[email protected]/1M db@1W/1M Gh Xmax FF Kg
Frequency and Impedance Response
Ohms Ohms mH Hz 0.97 Fs/Qts dB dB mm mm 1
6.46 8.13 0.03 745.77 5.66 0.83 902.87 107.7 107.8 3 0.1
5.0% 7.5% 15%
+/- 1.0db +/- 1.0db
Energy Bandwidth Product Moving Mass Suspension Compliance Effective Cone diameter Effective Piston Area Effective Volume Motor Force Factor Motor Efficiency Factor Voice coil former Material Voice coil inner diameter Rated Noise Power Test Spectrum Bandwidth Driver Size
EBP Mms Cms D Sd Vas BL ß VCfm VCd P 1.5K - 15K Hz Inch
Y AR
DC Resistance Minimum Impedance Voice Coil Inductance Resonant Frequency Mechanical Q Factor Electrical Q Factor Total Q Factor Ratio Fs/Qts Half Space Sensitivity @2.83V Half Space Sensitivity @1W/1M Gap Height Maximum Linear Excursion Ferrofluid Type Driver Mass
IN
IM
EL Specifications
Tymphany HK LTD Address : Room 1307-8 Dominion Centre, 43-59 Queens Rd East, Wanchai, Hong Kong E-mail:
[email protected]
(1/Qes)*fs g um/N cm cm^2 L Tm (T*M^2)/Ohms mm W 1.4 in
0.5 86.7 3.72 10.9 0.01 4.05 2.5 ASV 35.5 25