Preview only show first 10 pages with watermark. For full document please download

Dfp-106acs • Full Duplex Uhf Satcom

   EMBED


Share

Transcript

DFP-106ACS • Full Duplex UHF SATCOM DESCRIPTION FEATURES A Low-Noise Preamplifier that includes dual UHF SATCOM }} A noise figure of less than 2.5 dB and transmit power (DAMA) diplexers to allow full duplex operation. Coaxial relays handling of 125 W-CW. Very low loss, .3 dB nominal are included to allow operation choice between 2 antennas. bypass mode. Built-in-test (BIT) 5 volt signal. When unpowered, the radio port is connected directly to the default antenna port. P: 540.659.2132 F: 540.659.2133 [email protected] 2040 Jefferson Davis Highway, Stafford, Virginia 22554 www.MetropoleProducts.com DFP-106ACS DFP-106ACS DUAL DIPLEXER/PREAMPLIFIER/BYPASS FULL DUPLEX UHF SATCOM FULL DUPLEX SATCOM WEATHERUHF RESISTANT DUAL DIPLEXER/PREAMPLIFIER/BYPASS WEATHER RESISTANT 10.00 8-32 UNC-2B X .38 DEEP (6 PLACES FARSIDE) 1.86 BLUE LED 1.20 J6 ZENITH ANT TYPE "N" 5.98 J4 RADIO SET J5 HORIZON ANT 5.50 4.86 3.48 3.42 J3 CONTROL DC POWER 1.10 .24 .50 ELECTRICAL CHARACTERISTICS RECEIVE CHARACTERISTICS, J5 or J6=INPUT, J4=OUTPUT Electrical Characteristics Passband Rolloff, 243-270 MHz ............................................. 1.5 dB max. VSWR, 243-270 MHz ................................................................. 1.5:1 max. 243-270 MHz .................................................................. 28 dB min. RECEIVEGain, CHARACTERISTICS, J5 or J6=INPUT, J4=OUTPUT Stopband, 0.3-216 MHz, Note 1 .............................................. 80 dB min. PassbandStopband, Rolloff, 243-270 MHz...............................................................1.5 dB max. 216-225 MHz, Note 1 ............................................. 60 dB min. VSWR, 243-270 MHz355-1120 ...............................................................................1.5:1 Stopband, MHz, Note 1 ........................................... 70max. dB min. NoiseMHz Figure, 243-270 MHz .................................................... dB max. Gain, 243-270 ................................................................................... 28 3.0 dB min. @ 1 MHz, dB gain .............................................. -25min. dB min. Stopband,Input 0.3-216 Notecompression 1 ............................................................... 80 dB Input signal, Protection Level, 243-270 MHz ...............................1 W, CW Stopband,Intercept 216-225point, MHz, Note 1 .............................................................. 60 dB min. third order ........................................... +20 dBm nominal Stopband, 355-1120 MHz, Note 1 ............................................................ 70 dB min. Noise Figure, MHzto......................................................................3.0 dB max. Note243-270 1: Relative Receive Passband Note 2: Limited by LNA reverse isolation. Input @ 1 dB gain compression ...............................................................-25 dB min. Input signal, Protection Level, 243-270 MHz ................................................1 W, CW Intercept point, third order ........................................................... +20 dBm nominal Note 1: Relative to Receive Passband Note 2: Limited by LNA reverse isolation. .74 2.25 9.00 TRANSMIT CHARACTERISTICS, J4=INPUT, J5 OR J6=OUTPUT TRANSMIT CHARACTERISTICS, J4=INPUT, J5 or J6=OUTPUT Passband .............................................................................. 292-318 MHz Passband Insertion loss .........................................................................................292-318 over Passband ................................................ 1.0 dB max. MHz VSWR over Passband ............................................................... 1.5:11.0 max. Insertion loss over Passband ............................................................. dB max. InputVSWR Power.over ...................................................................... +21.5 dBW max. Passband ........................................................................... 1.5:1 max. Stopband, 0.3-225 MHz ............................................................ 90dB min. Input Power...............................................................................+21.5 dBW max. Stopband, 0.3-225 MHz .......................................................................90dB min. Stopband, 355-1000 MHz ........................................................ 60 dB min. Stopband, MHz, Note 2 ........................................................55 dB min. By Pass Mode:225-270 225-400MHz .......................... 0.35 dB max., 1.35:1 max. BIT Voltage Level .................................................................. 5.0 +/-1 VDC Stopband, 355-1000 MHz ...................................................................60 dB min. By Pass Mode: 225-400MHz ......................................0.35 dB max., 1.35:1 max. Stopband, 225-270 MHz, Note 2 .............................................. 55 dB min. GENERAL CHARACTERISTICS BIT Voltage Level .............................................................................resistant 5.0 +/-1 VDC Environment ....................................................Airborne/Weather Weight .................................................................................... 6.6 lbs. max. Operating Current @ 28 VDC nominal .................................. 500 mA max. General Characteristics Environment ............................................................. Airborne/Weather resistant Weight...............................................................................................6.6 lbs. max. P: 540.659.2132 F: 540.659.2133 Operating Current @ 28 VDC nominal .............................................500 mA max. [email protected] 2040 Jefferson Davis Highway, Stafford, Virginia 22554 www.MetropoleProducts.com Metropole Products, Inc.