Transcript
STANDARD FEATURES • NEW Factory authorized startup • ENERGY STAR® Qualified
DH5000
High Temperature Hood-type Dishwashing Machine
• NEW Exclusive Built-in booster configured for both 40° and 70° Rise • Rinse Sentry – ensures 180°F final rinse • Auto start – starts unit when hood is closed • Single point electrical connection • High efficiency 1 HP pump • Up to 53 racks per hour • Self draining pump • Automatic tank fill • Detergent/chemical connections • Interchangeable upper and lower spray arm • Automatic drain valve – drains wash tank when power is off • Vent fan control • Bottom mounted digital controls • PRV (Pressure Reducing Valve) • Sloped hood keeps hot vapors away from operator • Standard and Heavy Duty wash cycles
OPTIONS & ACCESSORIES :: Drain Water Tempering Kit :: Ventless/Heat Recovery/ Condensate Removal option :: Door interlock – locks door closed during the vent fan cycle :: Hot water coil with gas booster :: Racks
SPECIFIER STATEMENT Specified unit will be Champion model DH5000 high temperature hood-type dishwashing machine. Features sloped hood, electronic controls, Rinse Sentry, Auto start, interchangeable stainless steel wash and rinse arms, up to 53 racks/hr., .83 US gals/rack. 1 year parts and labor warranty.
:: Peg :: Flat ::NEW Champion ION scale prevention system
Champion Industries, Inc. 3765 Champion Blvd., Winston-Salem, NC 27105 Tel: 336/661-1556 Fax: 336/661-1979 www.championindustries.com
8/16 Printed in U.S.A. Champion, an Ali Group Company
DH5000 HOOD-TYPE
Project Item No. Quantity
UT
20-1/8" [511]
Rear Track
Corner Track
30" [764] Table Typ
Inside Tracks
DH5000 HOOD-TYPE
From Wall
30" [762]
Dimensions shown in inches and [mm]
PLAN VIEW 29-1/2" [749]
30" [762] 4
77-1/4" [1963] Hood Up
17" [431] Clearance
69-3/4" [1770] 2
8" [203] 4 43 [121]
4-3/8" [112]
60-1/8" [1526]
Typical Table Construction 5"
8-3/4" [221]
17" [432]
6" [152]
31" [787]
3
Front View
8-7/8" [225]
1
3
26-1/8" [663]
34-1/8" [867] 5-1/8" [129]
HANDLE CLEARANCE CUTOUT FOR CORNER OPERATION
FRONT VIEW
Corner Track
20-1/8" [511]
Rear Track
Inside Tracks
30" [764] Table Typ
30" [762]
Utilities 2
Hot Water
29-1/2" [749]
Drain
2" OD Connection 15 GPM Max Flow
Exhaust
250 CFM Hood Required
Electric Heat, No Booster 4 43 [121]
17" [432]
1
37-7/8" 33-3/4" [963] [857]
Voltage 208-240/60/1 208-240/60/3 460-480/60/3 3
2
Rated Amps 31-35 20-22 8-7/8" 10 1 [225]
31"
Voltage 208-240/60/1 208-240/60/3 460-480/60/3
SIDE VIEW
Capacities
4
4-3/8" [112]
Machine [787] and Built-in Booster 34-1/8" [867]
SPECIFICATIONS
Warning: Plumbing, electrical connections should be made by qualified personnel who will observe all 17" the applicable[431] plumbing, sanitary and safety codes Clearance and the National Electrical Code.
69-3/4" [1770]
3
STRAIGHT THROUGH TABLE CONFIGURATION BETWEEN TABLE DIMENSION
PLAN VIEW
3/4" NPT Hot Water 110° - 140°F 20-22 PSI Flow Pressure
Rated Amps 67-76 41-47 21-22
3
25-1/4" [641] Between Tables
Corner Configuration
7-5/8" [192] From Wall
Machine Connection (See Electrical Box)
4
21-3/8" [543]
1-1/2" [38] 20-1/8" [511] Inside Tracks
Electrical
26-1/2" [673]
Front Track
Plan View
1
3"
19-5/8" [500]
3
8-3/8" [214] From Wall
3
21-3/8" [543]
1-1/8" [29]
37-7/8" 33-3/4" [963] [857]
1
SIDE VIEW
1
7-1/4" [184]
1-1/2" [32] Roll
Side View
6" [152]
TABLE CONFIGURATION BETWEEN TABLE DIMENSION
HANDLE CLEARANCE CUTOUT
Shipping weight crated: 300 lbs. FOR CORNER OPERATION
1
8-3/4" [221]
High Temperature STRAIGHTMachine THROUGH Hood-type Dishwashing
7-5/8" [192] From Wall
20-1/8" [511] Inside Tracks
3"
2
"
25-1/4" [641] Between Tables
21-3/8" [543]
1-1/2" [38]
18-1/8" [459]
8" [203]
DH5000
Front Track
5"
2
2
26-1/2" [673]
60-1/8" [1526]
Minimum Supply Circuit Ampacity 45 30 15
Maximum Overcurrent Protective Device 45 30 15
19-5/8" [500] 26-1/8" [663] Minimum Supply
Circuit Ampacity FRONT VIEW 80 60 25
Racks per hr. (NSF rated) Wash tank (gal.)
53 9.5
Motor horsepower Water consumption
1 HP
Gal. per hr. (max. use) Gal. per rack
45.7 0.83
Temperature °F
Wash Rinse
150 180
Heating
Tank heat, electric Electric Booster
5.2 kW 7.5-10 kW
Time cycle in seconds Maximum Overcurrent Protective Device 80 60 25
Wash Rinse Sanitary Dwell Total cycle
Standard Extended
35 65 10 10 15 15 60 90
‘USGBC’ and related logo is a trademark owned by the U.S. Green Building Council and is used by permission. Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., 3765 Champion Blvd., NC 27105 • 336/661-1556 • Fax: 336/661-1979 • www.championindustries.com
