Preview only show first 10 pages with watermark. For full document please download

Dialog Plus Rack - Rs Components International

   EMBED


Share

Transcript

Local Area Networks (LAN) Servers Data centers Industrial PLCs Cash registers Emergency devices (lights/alarms) Telecommunication devices DIALOG Plus Rack NET-TEL RANGE 700-3000VA single-phase The DIALOG PLUS RACK series comprises the 7001000-1500-2000-3000VA models and uses double conversion technology (VFI). The load is powered continuously by the inverter with an EMI filtered, stabilised and regulated sinewave supply. The input and output EMI filters considerably increase the immunity of the load to mains disturbances and surges, even on bypass. The UPS can power the load for long periods (using battery extension packs) or provide sufficient runtime to allow shut-down of the protected computer systems using the PowerShield² software, supplied as standard, for Windows 95, 98, 2000, Me, XP, Mac OSx, 9.x, Linux NT 4.0 operating systems. For outstanding power protection and communication DIALOG PLUS RACK is the best solution for sensitive and “mission-critical” applications. 2-YEAR WARRANTY CHARACTERISTICS • reliable, stabilized, filtered voltage (double on-line conversion technology (VFI according to EN500913 specifications) with filters for the suppression of atmospheric disturbances • high level immunity to surges (6kV according to IEC801-5) • auto restart at power-up (programmable) • power factor correction of the load (UPS input power factor, close to 1) • low power consumption (programmable “Auto Power Off” function for automatic shut-down of the UPS under no-load conditions) • simplified maintenance • battery optimisation: using the Power Share function - DLPR70 and DLPR100 - for automatic, software-programmable disconnection of non-critical loads, after 1 minute of battery back-up or on low battery alarm • scheduled for timed shut-down (software programmable) • high level reliability of the batteries (automatic battery test) • high level reliability of the UPS (full microprocessor control) • low impact on the mains supply (sinusoidal absorption). ADVANCED COMMUNICATION • advanced, multi-platform communication for all operating systems and network environments: PowerShield² supervision and shut-down software included, with SNMP agent, for Windows 95, 98, 2000, Me, XP, NT 4.0, Novell, Linux, Mac Os X, Mac Os 9.x operating systems. The UPS is equipped with a cable for direct connection to the PC (Plug and Play) • RS232 serial port. MODELS DLPR 70 DLPR 100 DLPR 150 DLPR 200 DLPR 300 POWER 700VA/450W 1000VA/700W 1500VA/1050W 2000VA/1400W 3000VA/2100W INPUT Rated voltage 220/230/240 Vac Input range 170-276 Vac Rated frequency 50/60 Hz ±5Hz Frequency 50 Hz Minimum voltage without battery intervention 170 Vac (140 Vac with load 50%) Maximum current (A) 3.5 5 7.4 10 14.4 Rated current (A) 2.5 3.5 5.2 6.8 10.2 Power factor > 0.93 > 0.99 BY PASS Voltage tolerance static ± 2% Frequency tolerance ± 0,5% BATTERIES Type Maintenance-free sealed lead-acid Recharge time 5-7h 4-6h 5-7h OUTPUT Rated voltage 230 Vac selectable ± 1.5% 220/230/240 Vac selectable ± 1,5% Waveform Sinewave Voltage distortion < 2% Frequency autoranging 50 or 60 Hz selectable Frequency tolerance ± 0,5 % Crest factor (Ipeak/Irms) 3 : 1 (up to 100% of load) Overload 150 % In per 2s Output sockets 2 IEC 320 10A 4 IEC 320 10A 4 IEC 320 10A + 1 IEC 320 16A ENVIRONMENTAL AC/AC Efficiency Batteries (n/V/Ah) 89% 2/12/7 90% 3/12/7 5/12/7 Interface ports 10/12/7 RS 232 Operating temperature 0 - 40 °C, ideal for battery +15 -25 °C Humidity < 90% non condensing Protection Safety compliance 6/12/7 Overload - short-circuit - overvoltage - undervoltage - temperature - low battery EN 50091-1-1 and Directive 73/23/EEC EN 50091 - 2 cl. B and Directive 89/336/EEC Surge capability IEC 801-5 6 KV 1.2 / 50 µs; 3KA 8/20 µs Colour Dark grey RAL 5004 Noise <40 dBA at 1 m OPTIONS Extended run battery solutions – Communication software yes PowerShield² standard version included (for accessories see software datasheet) External manual bypass (hwd) mm/kg Weight (kg) dimensions 89x483x380 - weight 2 7 Dimensions (hwd) (mm) Back-up (min) 10 24 27 2Ux19”x380 8* 4Ux19”x515 10* 11* 11* * According to load applied Product characteristics may be changed to meet specific customer demands. For more information contact Riello Galatrek Ltd: Tel: 0800 269 394 or +44-(0)1978 729 297 Email: [email protected] 43 4Ux19”x550 Website: www.riello-ups.co.uk 13*