Transcript
Uncoated Copper Clad Boards
Make your own professional looking prototype boards with trace widths as narrow as .005” (.13mm). All boards are FR4 material and come packaged individually in a black bag with blue header. CAUTION: Do not open in direct sunlight, open in darkroom environment only.
Terminal and Distribution Strips
All boards are made from FR4 material. 1/2 oz. copper is ideal for shorter etching times and very fine trace lines. Use 2 oz. and thicker for higher current applications and heatsinking. 1/16 inch thick boards are standard with thinner boards offering board flexibility and reduced weight.
Positive Coated Sensitized Copper Clad Boards
Dimensions Inch (cm)
Digi-Key Part No.
Fig. 1
6.5 (165.10)
Price Each
Coated Copper Clad PC Board
Dimensions Inch (cm)
Digi-Key Price Injectorall Part No. Each Part No. Single Sided 1/16” (1.59mm) Thick, 1 oz Copper 3 x 4.5 (7.62 x 11.43) PC17P-ND 5.62 PC17P 4 x 6 (10.16 x 15.24) PC18P-ND 9.00 PC18P 4.5 x 7 (11.43 x 17.78) PC18P-C-ND 10.30 PC18P-C 6 x 6 (15.24 x 15.24) PC18P-S-ND 11.32 PC18P-S 6 x 9 (15.24 x 22.86) PC19P-ND 16.84 PC19P 12 x 12 (30.48 x 30.48) PC19P-T-ND 39.74 PC19P-T 12 x 18 (30.48 x 45.72) PC19AP-ND 59.58 PC19AP 1/16” (1.59mm) Thick, 2 oz Copper 3 x 4.5 (7.62 x 11.43) PC9P-ND 7.46 PC9P 4 x 6 (10.16 x 15.24) PC10P-ND 12.42 PC10P 6 x 9 (15.24 x 22.86) PC11P-ND 26.39 PC11P 12 x 12 (30.48 x 30.48) PC11P-T-ND 62.11 PC11P-T Double Sided 1/16” (1.59mm) Thick, 1/2 oz Copper 12 x 18 (30.48 x 45.72) PC77P-ND 98.17 PC77P 1/16” (1.59mm) Thick, 1 oz Copper 3 x 4.5 (7.62 x 11.43) PC40P-ND 8.01 PC40P 4 x 6 (10.16 x 15.24) PC41P-ND 13.18 PC41P 4.5 x 7 (11.43 x 17.78) PC41P-C-ND 14.69 PC41P-C 6 x 6 (15.24 x 15.24) PC41P-S-ND 15.82 PC41P-S 6 x 9 (15.24 x 22.86) PC42P-ND 21.67 PC42P 12 x 12 (30.48 x 30.48) PC42P-T-ND 57.81 PC42P-T Single Sided 1/32” (.79mm) Thick, 1 oz Copper 3 x 4.5 (7.62 x 11.43) PC55P-ND 4.84 PC55P 4 x 6 (10.16 x 15.24) PC56P-ND 8.13 PC56P 4.5 x 7 (11.43 x 17.78) PC56P-C-ND 9.67 PC56P-C
1/16” (1.59mm) Thick, 1 oz Copper
Fig. 2
3 x 4.5 (7.62 x 11.43)
PC5-ND
3.53
PC5
4 x 6 (10.16 x 15.24)
PC6-ND
5.51
PC6
6.16
PC6-C
6.64
PC6-S
9.50
PC7
4.5 x 7 (11.43 x 17.78) PC6-C-ND 6 x 6 (15.24 x 15.24)
PC6-S-ND
6 x 9 (15.24 x 22.86)
PC7-ND
12 x 12 (30.48 x 30.48) PC7-T-ND
19.37
PC7-T
12 x 18 (30.48 x 45.72) PC8-ND
29.92
PC8
18 x 18 (45.72 x 45.72) PC8-E-ND
42.91
PC8-E
6.5 (165.10) .35 (8.89)
Fig. 3
4.9 (124.46) 1.36 (34.54) .30 (7.62)
1/16” (1.59mm) Thick, 2 oz Copper 3 x 4.5 (7.62 x 11.43)
PC9-ND
4.76
PC9
4 x 6 (10.16 x 15.24)
PC10-ND
7.61
PC10
8.99
PC10-C
4.5 x 7 (11.43 x 17.78) PC10-C-ND 6 x 6 (15.24 x 15.24)
PC10-S-ND
10.28
PC10-S
6 x 9 (15.24 x 22.86)
PC11-ND
15.41
PC11
12 x 12 (30.48 x 30.48) PC11-T-ND
29.04
PC11-T
12 x 18 (30.48 x 45.72) PC12-ND
43.53
PC12
18 x 18 (45.72 x 45.72) PC12-E-ND
55.74
PC12-E
Fig. 4
4.9 (124.46) .35 (8.89)
Fig. 5
3.5 (88.9) 1.36 (34.54)
Double Sided 1/16” (1.59mm) Thick, 1/2 oz Copper
.30 (7.62)
3 x 4.5 (7.62 x 11.43)
PC74-ND
4 x 6 (10.16 x 15.24)
PC75-ND
6 x 6 (15.24 x 15.24)
PC75-S-ND
10.23
PC75-S
6 x 9 (15.24 x 22.86)
PC76-ND
16.24
PC76
27.58
PC76-T
12 x 12 (30.48 x 30.48) PC76-T-ND
4.84
PC74
7.65
PC75
Positive PC Board Accessory
3 x 4.5 (7.62 x 11.43)
PC40-ND
4.36
PC40
4 x 6 (10.16 x 15.24)
PC41-ND
6.87
PC41
The UV exposure lamp is a 15W lamp for exposing the presensitized board. Intended to be used with your fluorescent 18” bi-pin fixture.
6 x 6 (15.24 x 15.24)
PC41-S-ND
7.66
PC41-S
6 x 9 (15.24 x 22.86)
PC42-ND
18” Fluorescent Exposure Lamp, Bi-Pin
.30 (7.62)
Single Sided
Developer and etchant solution available from Injectorall.
Description
1.36 (34.54)
Injectorall Part No.
Fig. 6
3.5 (88.90) .35 (8.89)
1/16” (1.59mm) Thick, 1 oz Copper
Digi-Key Part No.
Price Injectorall Each Part No.
PC557F- ND
23.98 PC557F
11.47
PC42
12 x 12 (30.48 x 30.48) PC42-T-ND
21.94
PC42-T
12 x 18 (30.48 x 45.72) PC43-ND
32.89
PC43
18 x 18 (45.72 x 45.72) PC43-E-ND
49.28
PC43-E
Fig. 7
6.5 (165.10) .43 (10.92)
Fig. 8
6.5 (165.10)
1/16” (1.59mm) Thick, 2 oz Copper
K
Unclad PC Boards
3 x 4.5 (7.62 x 11.43)
PC51-ND
4 x 6 (10.16 x 15.24)
Unclad (no copper) pc boards made of FR4 fiberglass material. Ideal for isolation of point-to-point wiring and wire wrapping applications.
6 x 9 (15.24 x 22.86)
Dimensions Inch (cm)
Digi-Key Price Part No. Each 1/32” (.79mm) Thick 6 x 9 (15.24 x 22.86) PC57-UNCLAD-ND 7.37 12 x 18 (30.48 x 45.72) PC58-UNCLAD-ND 26.61 1/16” (1.59mm) Thick 3 x 4.5 (7.62 x 11.43) PC5-UNCLAD-ND 3.42 4 x 6 (10.16 x 15.24) PC6-UNCLAD-ND 5.29 6 x 9 (15.24 x 22.86) PC7-UNCLAD-ND 10.20 12 x 18 (30.48 x 45.72) PC8-UNCLAD-ND 27.20
Injectorall Part No.
PC51
PC52-ND
8.45
PC52
PC53-ND
17.14
PC53
12 x 12 (30.48 x 30.48) PC53-T-ND
32.27
PC53-T
12 x 18 (30.48 x 45.72) PC54-ND
48.38
PC54
Digi-Key Part No. B3426D-ND B3427D-ND B3428D-ND B3429D-ND B3429AD-ND
1.8 (45.72) .30 (7.62)
PC55-ND
2.66
PC55
4 x 6 (10.16 x 15.24)
PC56-ND
4.94
PC56
6 x 9 (15.24 x 22.86)
PC57-ND
8.79
PC57
17.67
PC57-T
Digi-Key Part No.
Price Each
1
Terminal Strip, 128 five-tie-point terminals
923261-ND
22.02
2
Distribution Strip, 24 four-tie-point terminals
923277-ND
8.94
3
Terminal Strip, 96 five-tie-point terminals
923265-ND
18.20
4
Distribution Strip, 18 four-tie-point terminals
923281-ND
8.54
5
Terminal Strip, 68 five-tie-point terminals
923269-ND
14.27
6
Distribution Strip, 24 four-tie-point terminals
923285-ND
24.65
7
Terminal Strip, 54 four-tie-point terminals w/solder tails, viny backed, mounting screws provided
923292-ND
16.64
8
Distribution Strip, 36 four-tie point terminals
923293-ND
10.69
9
Terminal Strip, 34 five-tie-point terminals
923273-ND
9.57
Fig. Description
Double Sided 1/32” (.79mm) Thick, 1 oz Copper 2.54
3 x 4.5 (7.62 x 11.43)
PC44-ND
4.34
PC44
4 x 6 (10.16 x 15.24)
PC45-ND
6.12
PC45
6 x 9 (15.24 x 22.86) 2.54
Price Each 10.27 15.23 25.86 43.08 79.35
Injectorall Part No. B3426D B3427D B3428D B3429D B3429AD
10.58
PC46
12 x 12 (30.48 x 30.48) PC46-T-ND
PC46-ND
22.69
PC46-T
12 x 18 (30.48 x 45.72) PC47-ND
34.06
PC47
Single Sided .014” (.036mm) Thick, 1 oz Copper 3 x 4.5 (7.62 x 11.43)
PC94-ND
2.66
PC94
6 x 9 (15.24 x 22.86)
PC96-ND
8.83
PC96
12 x 18 (30.48 x 45.72) PC97-ND
26.50
PC97
More Product Available Online: www.digikey.com 2518
(US2011)
1.36 (34.54)
1/32” (.79mm) Thick, 1 oz Copper 3 x 4.5 (7.62 x 11.43)
PC5-UNCLAD PC6-UNCLAD PC7-UNCLAD PC8-UNCLAD
Drilled Copper Clad Breadboards
Dimensions Inch (cm) 3 x 4.5 (7.62 x 11.43) 4 x 6 (10.16 x 15.24) 5.75 x 8.5 (14.60 x 21.59) 5.75 x 17 (14.60 x 43.18) 11.5 x 17 (29.21 x 43.18)
Fig. 9
Single Sided PC57-UNCLAD PC58-UNCLAD
12 x 12 (30.48 x 30.48) PC57-T-ND
Double sided copper clad boards with drilled holes on .1” centers. Hole diameter of .042” fits most components. Perfect for use with pad cutting tool to customize your circuits. 1/16” thick board.
.43 (10.92)
5.29
Toll-Free: 1-800-344-4539 • Phone 218-681-6674 • Fax: 218-681-3380
Etching Copper Clad Circuits Uncoated Copper Clad Boards We offer 1/16”, 1/32” and 1/64” FR4 laminate with 1 ounce copper per square foot. This flame retardant laminate is translucent in color and made of continuous woven glass cloth impregnated with epoxy resin. The copper on 1 ounce board is 1.34 mil thick (0.0341mm). The boards are made of FR4 which is a flame retardant version of G-10 material. Developed specifically for the circuit processing industries requirements. Complies with Mil-S13949H-GFK. Provides ultraviolet blocking and fluorescence when using automated optical inspection (AOI). UL #E37002A PCB Thickness Dimension 1/16” 1/16” 1/16” 1/16” 1/16” 1/16” 1/32” 1/32” 1/32”
3” x 5” 4” x 6” 6” x 6” 6” x 9” 8” x 10” 12” x 12” 4” x 6” 6” x 9” 12” x 12”
1/16” 1/16” 1/16” 1/32” 1/32” 1/32”
6” x 6” 8” x 10” 12” x 12” 4” x 6” 6” x 9” 12” x 12”
Digi-Key Copper Part No. Single Sided 1oz. 473-1000-ND 1oz. 473-1001-ND 1oz. 473-1002-ND 1oz. 473-1003-ND 1oz. 473-1004-ND 1oz. 473-1005-ND 1oz. 473-1008-ND 1oz. 473-1009-ND 1oz. 473-1026-ND Double Sided 1oz. 473-1006-ND 1oz. 473-1090-ND NEW! 1oz. 473-1007-ND 1oz. 473-1010-ND 1oz. 473-1011-ND 1oz. 473-1027-ND
Price Each 4.42 5.44 6.38 9.06 12.46 16.27 5.68 9.48 16.68 7.24 5.28 18.50 5.91 8.82 19.07
Positive Coated Presensitized Boards Our presensitized boards provide high resolution and excellent fine line control. They are ideal for prototypes, small production runs, and student training. White protective peel-off liner is attached to protect board from incident light and scratching. We also offer a large thin (12” x 18” x 1/32 inch) cat#675 paper phenolic presensitized board (Easy Cutting!!), perfect for cutting into smaller boards with no special equipment. Perfect for the classroom. PCB Thickness Dimension 1/16” 1/16” 1/16” 1/16” 1/32” 1/32” 1/32” 1/16” 1/16” 1/32” 1/64”
Digi-Key Copper Part No. Single Sided 3” x 5” 1oz. 473-1014-ND 4” x 6” 1oz. 473-1015-ND 6” x 6” 1oz. 473-1016-ND 6” x 9” 1oz. 473-1017-ND 4” x 6” 1oz. 473-1020-ND 6” x 9” 1oz. 473-1021-ND Paper Phenolic Single Sided 12” x 18” 1oz. 473-1018-ND Double Sided 6” x 6” 1oz. 473-1023-ND 6” x 9” 1oz. 473-1024-ND 6” x 9” 1oz. 473-1025-ND 6” x 9” 1oz. 473-1022-ND
Price Each 8.84 9.48 9.62 14.18 8.65 14.18 30.69 13.26 18.16 18.16 18.16
Digi-Key Part No. 473-1028-ND 473-1038-ND 473-1040-ND 473-1041-ND
Length Feet
Width Inches
5 5 5 5 5 25 25 25 50 50 50 100 100 100
0.025 0.050 0.075 0.100 0.125 0.050 0.075 0.100 0.050 0.075 0.100 0.050 0.075 0.100
5 5 5 50
0.050 0.075 0.100 0.075
Digi-Key Color Part No. Fine Braid RMA Flux #1 White (SMT) 473-1060-ND #2 Yellow 473-1061-ND #3 Green 473-1062-ND #4 Blue 473-1063-ND #5 Brown 473-1064-ND #2 Yellow 473-1065-ND #3 Green 473-1066-ND #4 Blue 473-1067-ND #2 Yellow 473-1069-ND #3 Green 473-1070-ND #4 Blue 473-1071-ND #2 Yellow 473-1072-ND #3 Green 473-1073-ND #4 Blue 473-1074-ND Fine Braid No Clean #2 Yellow 473-1075-ND #3 Green 473-1076-ND #4 Blue 473-1077-ND #3 Green 473-1078-ND
Price Each 2.82 2.82 2.94 3.18 3.54 11.32 11.32 12.46 22.71 22.71 23.85 44.35 44.35 46.63
Description Super Thermal Grease, 3.5g Syringe Silicone Heat Transfer Compound, 5oz. Tube Non-Silicone Heat Transfer Compound, 2oz. Tube
Digi-Key Part No.
Price Each
MG Part No.
473-1081-ND
10.18
8241-T
473-1086-ND
10.76
8242-WX25
PART
En
Me
capsu
lat i ng
PAR T
ets
HB
A
mpou a nd Po tting Co
Black resin / Résine
C he
MG
ic
m al s
D
A
LE R F E E R
473-1095-ND NEW!
MG Part No.
36.38 832B-375ML 162.00 832B-3L
473-1083-ND
35.24 832C-375ML
473-1091-ND NEW!
45.49 8321C-320ML
473-1092-ND NEW!
3.94 10.18 9.48
General Foam Swab: Shred resistant, 100% urethane foam heads with 100 PPI porosity. Bonded securely to a 6” birch shaft.
nd
E
LD O
S
473-1082-ND
6.29 13.60 5.96
Antistatic Foam Over Cotton Swab: Antistatic, shred resistant, 100% urethane foam heads with 100 PPI porosity over extra absorbent U.S.P. pharmaceutical grade purified cotton. Bonded securely to a 6” birch shaft. Compatible with most solvents.
165.60 8321C-4L
HB
noire
Hori
zonta e hroi l Burn Work brûlur ) Test / Satisfaire á l´épreuve 20˚C ing Time g @ / Temps de tavail: 1 hr. (100
Price Each
9.48 9.48
FLAM E RETARDANT
B
UL
Digi-Key Part No.
Price Each
Foam Over Cotton Swab: Shred resistant, 100% urethane foam heads with 100 PPI porosity over extra absorbent U.S.P. pharmaceutical grade purified cotton. Bonded securely to a 6” birch shaft. Compatible with most solvents.
Net Fill (Part B)
Description Standard Black Compound, 375 ml Standard Black Compound, 3 Liter Standard Clear Opaque Compound, 375 ml Standard Water Clear Compound, 350 ml Standard Water Clear Compound, 3 Liter
Digi-Key Part No. Abrasive Cleaning Brushes Stainless Steel, Brush Face 1 3/8” x 7/16” 473-1043-ND Brass, Brush Face 1 3/8” x 7/16” 473-1044-ND Non Abrasive Cleaning Brushes Hog Hair, Brush Face 1 3/8” x 7/16” 473-1045-ND Hog Hair, Brush Face 2 1/4” x 1” 473-1046-ND Horse Hair, Brush Face 1 3/8” x 7/16” 473-1047-ND Technical Cleaning Brushes Horse Hair (5 pcs.), Brush Face 1/4” x 3/8” 473-1048-ND Double Ended Horse Hair, 473-1049-ND Brush Face 1/4” x 5/16” Wooden Chisel Hog Hair, 473-1050-ND Brush Face 3/4” x 5/16”
Double Headed Cotton Swab: Low lint, extra absorbent U.S.P. pharmaceutical grade purified cotton bonded on a 6” white birch shaft for extra rigidness. Compatible with all solvents.
Price Each 13.36 18.16 10.76
Y HA RDENER
ng
Non Abrasive Cleaning Brush
Swabs
Provides excellent protection from impact, shock, moisture, abuse, chemicals, and analysis. Provides technology security. Excellent for explosion proof EPOXY components. Features: • Non-conductive, an electrical insulator • Non-porous • Water and chemical resistant 2 Part Kit • Provides excellent technology security, extremely difficult to remove once cured • Excellent machining properties • Suitable for explosion proof components, spark arresting • Low toxicity • Easy and simple to mix • Long pot life • Can be cured in one hour at 65°C (150°F) OX
Abrasive Brushes: Excellent utility brush. Great for cutting corrosion and removing oxides from connector ends. Also great for cleaning soldering iron tips. Burnish contacts without removing base metals. An excellent gold contact cleaner. Non Abrasive Brushes: Excellent for removing flux and general cleanup. Can be used dry or wet. Works well with sticky or crusty materials. Technical Cleaning Brushes: Works well for dusting, cleaning with fluids and general cleanup. Excellent for removing flux.
Tapered Swab: Low lint, extra absorbent U.S.P. pharmaceutical grade purified cotton bonded on a 6” white birch shaft for extra rigidness. Compatible with all solvents.
Digi-Key Part No. 473-1096-ND 473-1097-ND 473-1098-ND
125ml, 4.2 oz.
Price Each 18.97 57.18 12.24 43.95 9.04
45.49 832HT-375ML
Description
Price Each 8.84 8.21 24.99 10.18 11.32
Tim 1 hr. e / Temp (100 s de travail g @ 20˚ C )
Now offering a choice between Sn96 and Sn99 - the two most commonly used Lead Free Solders in the industry.
45.48 832TC-450ML
473-1085-ND
Technical Cleaning Brush (473-1048-ND shown)
3.18 3.30 3.54 26.13
Digi-Key Part No. 473-1032-ND 473-1033-ND 473-1035-ND 473-1036-ND 473-1037-ND
rki
Ga 21 ug e
210.00 833FRB-3L
473-1089-ND
Abrasive Cleaning Brush
Prototyping Maintenance / Repair Pens
Wo
CleaNO n
473-1094-ND NEW!
MG Part No.
Brushes
Super Wick™ RMA type flux, Come on static dissipative spools on all sizes. No Clean Wick (NS) offers Halide free residue that is non-corrosive and does not require cleaning.
P
0.0 Diam 32 ” .
45.49 833FRB-375ML
Desoldering Braid
EBtra P
Economical Etching System . . . . . . . . . . . . . . . . . . $55.94
Price Each
Description Presaturated Alcohol Wipes - 75 wipes LCD Cleaning Wipe 25 per box
Potting and Encapsulating Compound
Ideal for students and hobbyists. An inexpensive etching solution. • 5 liter heavy duty polyethylene etching tank • Air pump and tubing • Sparging unit • Bag of vinyl gloves • Complete instructions
Digi-Key Part No. 473-1093-ND NEW!
Cleaning Wipes
Price Each 222.00 9.04 2.60 7.56
NEW! Thermal Grease and Compounds
Economical Etching System
Digi-Key Description Part No. Sn96 1/4lb. Spool, 21 AWG 473-1102-ND Sn96 1lb. Spool, 21 AWG 473-1103-ND Sn99 1/4lb. Spool, 21 AWG 473-1100-ND Sn99 1lb. Spool, 21 AWG 473-1101-ND Lead-Free Solder Tip Tinner, 1oz. 473-1099-ND
Description Kit Etching PCB with Heater and Pump Transparency Film (5 sheets), 8” x 11.5” Foam Brush for etchant or developer Latex Disposable Gloves (10 pr gloves)
Description Etch Resistant Trace Pen Rosin Flux Pen Conductive Silver Trace Pen Green Overcoat Pen (Acrylic) Silicone Conformal Coating Pen
Convenient kit required to “expose” presensitized copper-clad boards. Includes exposure tube, clear-acrylic weight for artwork, fluorescentlight fixture with stand and complete instructions. 473-1030-ND PCB Photo Exposure Kit - 115VAC . . . . . . . . . . . $55.94
NEW! Lead Free Solders
• 7 liter heavy duty polyethylene etching tank • Sturdy mounting bracket • Clear acrylic lid • Heavy duty air pump • Three way adjustable airline manifold • Triple line sparging unit • 200 watt “Over the Side” immersion heater with quartz element, preset/adjustable temperature control • Adhesive digital thermometer • Bag of vinyl gloves • Complete instructions
Convenient micro tip pen allows for delicate spot repair and maintenance on circuit boards. Choose from a wide range of pens.
Exposure Kit
473-1029-ND
Description Flame Retardant Compound, 375 ml Flame Retardant Compound, 3 Liter Thermally Conductive Compound, 450 ml High Temperature Compound, 375 ml
zon
tal
UL
Rectangular Foam Swab: Large foam head bonded to sturdy handle for aggressive cleaning applications.
Digi-Key Part No. Double Headed Cotton 100 Swabs per package 473-1051-ND Tapered Double Headed, 100 Swabs per package 473-1052-ND Foam Over Cotton Single Headed, 10 Swabs per package 473-1053-ND Single Headed, 50 Swabs per package 473-1054-ND Antistatic Foam Over Cotton 10 Swabs per package 473-1055-ND General Foam Single Headed, 50 Swabs per package 473-1057-ND Rectangular Foam 50 Swabs per package 473-1059-ND Description
Price Each 4.62 4.62 8.21 20.43 8.84 18.16 20.43
More Product Available Online: www.digikey.com Toll-Free: 1-800-344-4539 • Phone 218-681-6674 • Fax: 218-681-3380
(US2011)
2519
K
Specialty Prototyping Boards
PCB Fabrication Starter Kit and “Combo” Crossover Kit
Fig. 1
The PCB “Fab-In-A-Box” Starter Kit makes it easy to fabricate single and double sided printed circuit boards. GBC® Laminator is not included in these kits. Starter Kit Includes: • 20 Sheets TTS paper • 2 - 8” x 10” x .032” Single Sided PCBs • 2 - 8” x 10” x .032” Double Sided PCBs • Green TRF • White TRF • Sample Images Fabricate single and double sided PCBs and create custom enclosure graphics with the “Combo” Crossover Kit. Combo Kit Includes: • 20 Sheets TTS paper • 19 Foil Samples (8” x 36”) • 2 Fiberglass Laminate Carrier Boards • Carrier TRF (8” x 15’) • 3M Low-Tack Tape • 2 Alignment Carriers • KK-2000 Adhesive Spray • Alcohol Swabs • Sample Images • 2 - 8” x 10” x .032” Single Sided PCBs • 2 - 8” x 10” x .032” Double Sided PCBs • Green TRF • White TRF 182-1027-ND 182-1028-ND
PCB Fabrication Starter Kit for PCBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $74.95 PCB Fabrication and DecalPRO “Combo” Kit for PCBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $149.95
Fig. 2
Front
Back
Fig. 4
Fig. 3
Front
Front
Back
Fig. 6
Fig. 5
Front
Back
Back
Front
Front
Back
Back
DecalPRO® Starter Kit Make custom white, metallic and full color decals with the DecalPRO Kit. Ideal for “1-up” and prototyping projects. Kit does not include laminator.
Material: FR-4
Kit Includes: • 20 Sheets of TTS paper • 19 Foil Samples (8” x 36”) • 2 Fiberglass Laminate Carrier Boards • Carrier TRF (8” x 15’) • 3M Low-Tack Tape • 2 Alignment Carriers • KK-2000 Adhesive Spray • Alcohol Swabs • Sample Images • 4-page “Quick-Start” Instructions 182-1026-ND
DecalPRO Starter Kit for Dry-Transfer Text Graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $89.95
Toner Transfer System
Make instant circuit boards using any laser printer or photocopier!
Simple 3-Step Process: 1. Print circuit layout directly to TTS paper 2. Iron the image to copper-clad board 3. Soak in water to remove paper; now ready to etch!
NO DARKROOM! NO NEGATIVES! NO CHEMICALS! NO LOST TIME!
• Detailed instructions included for making single and double sided PCBs • Also shows how to make custom full color decals for any application
GBC Laminator
Fig. Description Prototype Board, 2mm Grid, Pad-Per-Hole 1 with J1 Connector, .025” holes plated thru Combo Board, 2mm/.100” Grid, Pad-Per-Hole 2 with J1, .025” and .042” holes plated thru Prototype Board, 2mm Grid, Three Hole 3 Solder Pads, .025” holes plated thru Combo Board, 2mm/.100”/.050” Pad-Per-Hole 4 3-Grid Combo, .025” & 0.42” holes plated thru Prototype Board, Standard Density 25, 15, 9 Pin, 5 D-Sub, 0.39” Diameter Holes Prototype Board, High Density 15, 26, 44, 62, 78, 6 and 104 Pin, D-Sub, 0.39” Diameter Holes
Dimensions WxLxH
Digi-Key Part No.
1
Price Each 10 25
3.94” x 6.3” x .062” V1253-ND
28.77
25.30
22.46
3.94” x 6.3” x .062” V1254-ND
33.38
29.35
26.05
3.94” x 6.3” x .062” V1255-ND
20.15
17.72
15.72
3.94” x 6.3” x .062” V1256-ND
20.15
17.72
15.72
3.94” x 6.3” x .062” V1251-ND
23.00
20.23
17.95
9.19” x 6.3” x .062” V1252-ND
29.90
26.29
23.34
Prototyping Boards
• Sheet size: 8-1/2” x 11” (21.59cm x 27.94cm) Fig. 1 182-1031-ND
NEW! Economy Laminator .032” PCBs for PCB Fabrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $114.70
182-1003-ND
TTS Paper Packet (10 Sheets) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $13.80
Printed Circuit Boards
Fig. 2
Fig. 3
Front
Front
Front
Back
Back
Back
8.00
2 Pack, Copper Clad, 1/2 oz. Copper 182-1017-ND 182-1018-ND
10.00
PCB Single Sided, .032", "8x10", 1/2 oz., 2 Panels . . . . . . . . . . . $18.60 PCB Double Sided, .032", "8x10", 1/2 oz., 2 Panels . . . . . . . . . . $19.99
Toner Foils “Green TRF” Simple 4-Step Process: 1. Transfer image to copper surface using the TTS paper 2. Iron on the Green TRF film 3. Pour 2 ounces Ferric Chloride into tray 4. Using an etchant soaked sponge, rub away the unwanted copper. (Disposable gloves required) • Works in conjunction with TTS paper • Completely seals the toner • ZERO pitting • Able to use heavier copper boards • Size: 8” Wide x 15’ 182-1021-ND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.95
Toner Foils “White TRF”
K
Use the White TRF for adding “silkscreen” artwork to your board! Place the white TRF paper over exposed toner “silkscreen” and apply heat to transfer the white pigment onto the toner, which is fused to the PCB. Perfect for finishing prototype boards and giving them a professionally silkscreened appearance. • Size: 8” Wide x 15’ 182-1022-ND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $8.95
Fig. Description Prototype Board, 2mm Grid, Pad-Per-Hole 1 0.25” Double Sided, PTH Combo Board, 2mm/.100” Grid, Pad2 Per-Hole Double Sided, PTH Prototype Board, 1mm Grid, Pad-Per-Hole 1 0.25” Double Sided, PTH Low Cost Double Sided, .100 x .100” Grid, 1 Pad-Per-Hole, PTH Low Cost Single Sided, .100 x .100” Grid, 3 Pad-Per-Hole Low Cost Double Sided, .100 x .100” Grid, 1 Pad-Per-Hole, PTH Low Cost Single Sided, .100 x .100” Grid, 3 Pad-Per-Hole
Dimensions WxLxH
Digi-Key Part No.
1
Price Each 10 25
Vector Part No.
3.94” x 6.3” x .062” V2013-ND
17.53 15.41 13.68 8017
3.94” x 6.3” x .062” V2014-ND
20.11 17.68 15.70 8018
3.94” x 6.3” x .062” V2016-ND◆ 34.03 29.92 26.56 8020 4.00” x 6.00” x .062” V2009-ND 4.00” x 4.00” x .062” V2010-ND
11.52 10.13 7.33
6.45
8.99 8015 5.73 8015-1
6.00” x 9.00” x .062” V2011-ND
19.47 17.12 15.20 8016
6.00” x 6.00” x .062” V2012-ND
10.59
9.32
8.27 8016-1
◆ RoHS Compliant
Drill Bits Diameter Inch (mm) .062” (1.57) .052” (1.32) .040” (1.02) .033” (.84) .029” (.74) .021” (.53) .0135” (.34) .062” (1.57) .052” (1.32) .040” (1.02) .033” (.84) .031” (.79) .029” (.74) .021” (.53) .0135” (.34)
Price Each 1 10 High Speed Steel PC300-52-ND 1.46 1.28 PC300-55-ND 1.62 1.42 PC300-60-ND 1.62 1.42 PC300-66-ND 1.84 1.61 PC300-69-ND 2.07 1.81 PC300-75-ND 2.07 1.81 PC300-80-ND 2.07 1.81 Carbide – All carbide bits have 1/8” (3.18mm) shank PC300C-52-ND 10.52 9.21 PC300C-55-ND 8.56 7.49 PC300C-60-ND 8.56 7.49 PC300C-66-ND 8.56 7.49 PC300C-68-ND 8.56 7.49 PC300C-69-ND 8.56 7.49 PC300C-75-ND 13.63 11.93 PC300C-80-ND 13.63 11.93 Digi-Key Part No.
Injectorall Part No. PC300-52 PC300-55 PC300-60 PC300-66 PC300-69 PC300-75 PC300-80 PC300C-52 PC300C-55 PC300C-60 PC300C-66 PC300C-68 PC300C-69 PC300C-75 PC300C-80
Prototyping PC Board Power Etching System and Etch Resist Ink Pens TIC ETCH-O-MA POWER AGITATING PUMP
A semi-automatic etching device for use in labs, schools, prototype shops and for limited PC board production. Air pump agitates etching solution for fast, very even etches. Handles up to two 8” x 10” (20.32cm x 25.40cm) PC boards at a time, either single or double sided.
Etching Kit Contains: • 1 Etching Tank (1.25 Gallon capacity; 4.73 Liters) and Reservoir Lid, 12” H x 2 1/2” W x 10 1/2” L (30.48cm x 6.35cm x 26.67cm), (Molded Polyethylene — ABS PC Board Holder), Capacity • 1 Etch-O-Matic Power Agitating Pump, 120V AC Operation • 1 Permanent or Portable Tip-Free Base • 1 PC Board Holder and Handle • 4 Feet (1.22 Meters) of Supply Hose GC394-ND GC392-ND GC220-ND GC222-ND
Etching Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $96.03 Etching Solution Heater . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $20.47 Standard Size Pen – draws lines approximately 1/32” (.79mm) wide — RoHS Compliant . . . . . . . $4.19 Fine Line Pen – draws lines as thin as 1/64” (.40mm) wide — RoHS Compliant . . . . . . . . . . . . . . . . . $4.46
More Product Available Online: www.digikey.com 2520
(US2011)
GC ELECTRONICS
Toll-Free: 1-800-344-4539 • Phone 218-681-6674 • Fax: 218-681-3380
