Transcript
optional equipment MOTORISED REEL LIFTING DEVICE • electronically operated reel lift suitable for loading rolls up to 700mm diameter
K & B GAPMASTER • alters the air gap between the anvil and magnetic cylinder to compensate for tool wear and balances unequal cutting
flatbed converting solutions
digicon series 2 CORONA UNIT • recommended for priming of none paper substrates prior to coating and advisable for cold foiling
SECOND REWIND SHAFT • comes complete with 76mm air expanding shaft, variable tension control, taper tension and maximum roll diameter of 700mm
1000mm UNWIND UPGRADE • complete with integral roll lift and web guide
SLITTING • all three major slitting techniques are available on the Digicon. Crush slitting against a hardened anvil, scissor slitting with top and bottom blades and razor blade slitting
SECOND INK CARTRIDGE • the quick release ink cartridge allows the flexographic print unit to be changed in moments reducing down time
BACK SCORER • this unit slits the silicon release liner from the back side to enable this waste to be rewound with the waste matrix
The World wide market leader in label converting solutions for digitally printed webs
digicon fb
SPECIFICATION
• 700mm unwind module
700mm maximum roll diameter unwind
• Heavy duty flat bed hot foil stamping unit with
320 W x 305 L maximum print hot foil area
• foil saver feeding mechanism
320 W x 300 L maximum die cut area
• along, across and skew on run adjust
Maximum running speed at 300mm repeat 36m/min
• Unique servo drive to the platen maintains constant dwell
Maximum 120 shots/minimum
irrespective of run speed. This feature also allows dwell to
Minimum plate cylinder flexo 10” (254mm)
be increased or decreased dependent upon the foil pattern
Maximum plate cylinder flexo 24” (609mm)
• full rotary flexographic print station with optional servo drive
Maximum rewind diameter single spindle 600mm
re-register for spot varnish/colours • air cooled UV curing unit • rolling segment flat bed die cutting module suitable for use with 12mm high precision steel rule • waste matrix stripping unit • slitter rewinder
HOT AIR DRIER • variable temperature control and high powered impinged air flow suitable for handling most heat sensitive material (used in full rotary mode only).
LAYON ROLLER • lower (second) rewind mandrel only and is recommended for winding of unsupported films
• Optional heavy duty embossing station mounted after the flexo station
Distributor Details
AB Graphic International Ltd. Lancaster Road, Carnaby Industrial Estate, Bridlington, East Yorkshire, England. YO15 3QY. t : + 4 4 ( 0 ) 1 2 6 2 6 7 1 1 3 8 f : + 4 4 ( 0 ) 1 2 6 2 6 7 7 0 0 9 e:
[email protected]
w: www.abgint.com
Due to our policy of continuous improvement and development AB Graphic International reserves the right to modify or update all product specifications and functions
optional modules digicon series 2
INTERFACE MODULE • connects the Digicon to the host digital print engine for in line operation
SEMI ROTARY SILK SCREEN MODULE complete with • only one set of end rings for all repeats • suitable for use with Rotaplate and Rotascreen • ideal for printing speciality inks
SEMI ROTARY HOT FOIL STAMPING complete with • magnetic or clamping cylinder • servo driven foil saver • auto pre-positioning • oil heater for perfect temperature control
SHEETER/THROUGH DIE CUT MODULE • One servo driven sheeter tool covers all repeats. • Solid tooling can also be used for through die cutting. • Module comes inclusive of one waste matrix stripping tower, accelerator and shingle conveyor
SEMI ROTARY EMBOSSING with • auto pre-positioning • servo drive re-register • customer can choose plate technology • optional heated cylinder
PHARMA INSPECTION MODULE • suitable for mounting fully automated vision inspection equipment and complete with reversible inspection festoon and secondary web guide prior to slitting
OVERLAMINATING STATION A very versatile unit suitable for laminating with and without silicon carriers, wet laminating, super varnishing and cold foiling
FULL ROTARY FLEXO MODULE • Mounted before the semi rotary section and can be offered with an optional delam/relam for printing on to the adhesive
The main advantages of the DIGICON solution: • FULLY MODULAR – minimises initial investment and machine capabilities can be increased as & when required • FULLY AUTOMATED PRE POSITIONING OF PRINT AND CONVERTING UNITS, ensures minimum wastage and quickest make ready times
OMEGA DIGICON • Semi rotary hotfoil • Semi rotary flexo • Semi rotary silk screen • Semi rotary die cutting • Slitting and rewinding
• WIDEST RANGE OF CONVERTING SOLUTIONS to enable you to meet your customers needs and demands • SEMI ROTARTY WEB MOTION with dial in repeat lengths, only one cylinder size and no gears or shafts to change • SERVO DRIVEN WEB TENSION CONTROL capable of handling a very wide range of substrates
DIGICON Web speed characteristics
• ERGONOMICAL DESIGN combined with exceptionally high quality engineering and world wide leading components ensures long life and reliability
Digicon V2 Maximum mechanical running speed
TOUCH SCREEN INTERFACE
DIGICON V2
60.0
• SOLE STRATEGIC PARTNER TO HP INDIGO for label converting solutions with hundreds of existing satisfied customers
50.0
Speed (m\min)
40.0
30.0
20.0
10.0
0.0 0
50
100
150
200
250
300
350
400
450
500
Web repeat (mm)
STANDARD EQUIPMENT UNWIND UNIT complete with • 76mm air shaft • End of roll slow down • Variable tension control ELECTRONIC WEB GUIDE with • ultra sonic sensor • interlocked pneumatic clamps • adjustable splicing table INFEED DANCER complete with • servo driven infeed nip SEMI ROTARY FLEXOGRAPHIC PRINTING STATION with • auto prepositioning • servo drive re-register • quick release cartridge • adjustments require no tooling AIR COOLED UV CURING SYSTEM
MID PRESS DANCER to allow for combination of rotary flexo and semi rotary die cutting SEMI ROTARY DIE CUTTING UNIT complete with • magnetic cylinder covers all repeats • auto lift and pressure down • servo drive re-register OUTFEED DANCER complete with • servo driven outfeed nip WASTE MATRIX STRIPPING STATION with • 76mm air expanding rewind shaft REWIND MODULE with • 1 x 76mm air shaft • Variable tension control • Winds labels in and out HMI is mounted on sliding rail for easy operation and ensures “finger tip” control
