Transcript
Digital Clock with Hidden Camera Quick start guide
www.spytecinc.com
Getting Started with Your Clock 1. Begin by removing the battery cover. Then insert your Micro SD card into the slot labeled “TF.” When inserting the Micro SD card, make sure that the gold contacts are facing up. 2. Remove both batteries in order to remove the paper tab blocking the battery contacts. Once the tab has been removed, replace the batteries back into the clock. 3. Connect the USB power adapter for 8 hours in order to fully charge the clock. 4. Turn the On/Off switch to the ON position to enable the camera feature. 5. While pointing the remote at the clock, press the button and a blue light will appear on the left side of the clock screen, indicating that the camera is now in stand-by mode. Pressing the button again will turn the blue light off, indicating that the camera is now shut off. Using the Video Recording Feature 1. While the clock is in stand-by mode, press the button on the remote and the blue light will blink 3 times and shut off. The clock will now be recording. 2. To stop recording, press the button again and the blue light will reappear.
Using the Motion Detection Video Recording 1. While the clock is in stand-by mode, press the motion detect button, symbolized by the icon showing a camera and stick figure. Once pressed, the blue light will blink 3 times and shut off. The clock will now record any motion that is detected. 2. To stop recording, press the same button again, and the blue light will reappear. Using the Camera to Take Pictures 1. While the clock is in stand-by mode, press to take a picture. The blue light will turn off and reappear after 2 seconds. Using the AudioRecording Feature 1. While the clock is in stand-by mode, press the microphone button on the remote and the blue light will blink 3 times and shut off. The clock will start voice recording. 2. To stop the recording, press the microphone button View Videos on a PC or Mac 1. On a PC
a. Turn the On/Off switch near the battery to the ON position and press the button on the remote to switch on the camera. b. Connect the Clock to the PC using the enclosed USB cable. c. Double-click on “My Computer” and locate “Removable Disk”. d. Double-click on “Removable Disk”. e. Double-click on “DCIM”. f. Double-click on “10020101”. g. You may now copy, move, or play your video files.
2. On a Mac a. Turn the On/Off switch near the battery to the ON position and press the button on the remote to switch on the camera. b. Connect the Clock to the Mac using the enclosed USB cable. c. The Clock will be recognized as an External Hard Drive. d. Double-click on the External Hard Drive.
www.spytecinc.com
