Transcript
Version 15.00
EagleSoft Digital Integration Air Techniques® ScanX® Scanner Accent Sensor ®
Instrumentarium
Sigma Sensor Orthopantomograph Panoramic ®
Planmeca
Proline and ProMax Panoramic Dixi3 Sensor ®
Progeny
VisonDX Sensor ®
Schick
iPan PanX Panoramic PanX-C Pan/Ceph Sensor (USB) Wireless Sensor ®
Sirona
Sidexis Sensor Orthophos XG or XG+ Panoramic
Soredex Digora Optime
Patterson EagleSoft Digital Integration
• i
Copyright 2007, Patterson Dental Supply, Inc. All rights reserved. The contents of this manual and the associated Patterson software are the property of Patterson Dental Supply, Inc. and are copyrighted. Patterson EagleSoft is a registered trademark of Patterson Dental Supply, Inc. All other trademarks are the property of their respective owners.
2202 Althoff Drive P.O. Box 1267 Effingham, IL 62401 Corporate 217.347.5964 Sales 800.294.8504 Fax 217.342.6950 Technical Support 800.475.5036 Technical Support Fax 217.342.4571 www.eaglesoft.net
ii •
Patterson EagleSoft Digital Integration
ScanX Scanner Integration Current ScanX users do not need to reinstall after upgrading. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using ScanX.
6. Under Air Techniques, click ScanX.
7. Click Next.
Patterson EagleSoft Digital Integration
• 1
8. Click Yes.
9. Click Install.
10. Click Finish. After the installation has finished, you will need to install the three ILE drivers: Air Techniques ScanX Standard (Loading 1), Air Techniques ScanX Standard (Loading 2) and Air Techniques ScanX.
11. Please insert your ScanX ILE Drivers CD into your CD-ROM. Click Install the ScanX Drivers and Utilities.
2 •
Patterson EagleSoft Digital Integration
12. Click Next.
13. Select Typical. Click Next.
14. Click Finish. After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance
Patterson EagleSoft Digital Integration
• 3
15. Select No, not this time. Click Next.
16. Select Install from a list or specific location (Advanced). Click Next.
17. Select Search for the best driver in these locations. Select the check boxes Search removeable media floppy, CD-ROM…) and Include this location in the search. Browse to C:\Program Files\EagleSoft\Shared Files OR C:\EagleSoft\Shared Files.
4 •
Patterson EagleSoft Digital Integration
18. Select Shared Files. Select OK.
19. Select Next.
20. Select Finish.
Repeat steps 15-20 until all three drivers have been installed.
Patterson EagleSoft Digital Integration
• 5
Accent Sensor Current Accent users do not need to reinstall after upgrading. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (If the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Accent.
6. Under Air Techniques, click Accent Sensor.
7. Click Next.
6 •
Patterson EagleSoft Digital Integration
8. Click Install.
9. Click Yes.
10. Select Finish. After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance. Place the Accent Sensor CD in your CD-ROM drive.
Patterson EagleSoft Digital Integration
• 7
11. Select No, not this time. Click Next.
12. Select Install from list of specific location (Advanced). Select Next.
13. Select Search for the best driver in these locations. Select the check boxes Search removable media (floppy, CD-ROM…) and Include this location in the search:. Select Browse and locate D:\Accent\Drivers\Device Drivers. Select Next.
8 •
Patterson EagleSoft Digital Integration
14. Select Finish.
Instrumentarium Integration (All Devices) Current Instrumentarium users do not need to reinstall after upgrading. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Instrumentarium.
6. Under Instrumentarium Imaging, select I/OPanoramic.
Patterson EagleSoft Digital Integration
• 9
7. Click Next.
SENSOR USERS ONLY
Select the checkbox Sigma Sensor. Select the Browse button to the correct location of the Gain Files for the sensor. 8. Click Next.
PANORAMIC USERS ONLY
Select the checkbox Orthopantomograph Panoramic. Select the Browse button to the correct location of the Gain Files for the panoramic unit. 8. Click Next.
SENSOR USERS ONLY
9. Click Yes.
10 •
Patterson EagleSoft Digital Integration
PANORAMIC USERS ONLY
9. Click Yes.
10. Click Install.
11. Click Finish. After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
12. Select No, not this time. Select Next.
Patterson EagleSoft Digital Integration
• 11
13. Select Continue Anyway.
14. Select Search for the best driver in these locations. Select the check boxes Search removable media (floppy, CD-ROM…) and Include this location in the search:. Select Browse and locateC:\Program Files\EagleSoft\Shared Files OR C:\EagleSoft\Shared Files. Select Next.
15. Select Install from a list or specific location (Advanced). Select Next.
12 •
Patterson EagleSoft Digital Integration
16. Select Finish.
Planmeca Panoramic and Sensor Current PLANMECA users do not need to reinstall after upgrading. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (If the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Planmeca.
6. Under the Planmeca Heading, choose I/OPanoramic.
Patterson EagleSoft Digital Integration
• 13
7. Click Next.
8. Insert the disk labeled Calibration, then click Next.
9. If you do not have any other calibration disks, click No to continue.
10. Click Yes.
14 •
Patterson EagleSoft Digital Integration
11. Click Finish.
12. Click Next.
13. Click Next.
Patterson EagleSoft Digital Integration
• 15
14. Click Next.
15. Click Yes.
16. Click Finish.
17. Select from the available radio button options and click OK. After installing the integration, insert USB sensors into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance. PLANMECA Sensor Additional Hardware
16 •
Patterson EagleSoft Digital Integration
17. Select No, not this time. Select Next.
18. Select Install the software automatically (Recommended). Select Next.
19. Select Finish.
Patterson EagleSoft Digital Integration
• 17
Progeny Installation 1. Please review all installation instructions before beginning the installation. You should have one (1) compact disc labeled Patterson Digital Integration. 2. Close all running programs on all machines. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into the CD-ROM drive. The following screen should automatically appear. If not, click on Start and choose Run. Type “D:\digital.exe” in the open field. (If the CD-ROM drive on your computer is represented by a letter other than ‘D’, substitute the appropriate letter) and click OK.
6. Select VisionDX under Progeny.
7. Single-click Next.
18 •
Patterson EagleSoft Digital Integration
8. Single-click Install.
9. Single-click Yes.
10. Single-click Finish. Plug the sensor into the USB port prior to configuring the calibration files.
11. To calibrate the Progeny Sensor, select the Progeny Sensor button under File | Preferences | X-ray.
Patterson EagleSoft Digital Integration
• 19
12. Select the Configuration button.
13. Select the Calibration button.
14. Select the Add Calibration button to locate the calibration files.
20 •
Patterson EagleSoft Digital Integration
15. Select the … button to browse to the CD containing the calibration file(s).
16. Select the Progeny CD and select OK.
Patterson EagleSoft Digital Integration
• 21
The calibration file now appears in the Add New Sensor Calibration File.
17. Select OK.
18. Select Yes.
19. Continue adding files or select Close. Close all Progeny windows and return to the X-ray Preferences screen. Repeat these Instructions on any machine that will be using the Progeny integration.
22 •
Patterson EagleSoft Digital Integration
Schick Installation Current Schick users do not need to reinstall after upgrading. Schick Ceph users will need to reinstall the Schick Ceph integration. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Schick.
6. Under Schick, select I/O-Panoramic. 7. Ensure your device is unplugged and click OK.
8. Click Next.
Patterson EagleSoft Digital Integration
• 23
9. Select the checkbox of the appropriate option. * Multiple selections can be made and installed at this time. Click Next.
10. Click Install.
SCHICK SENSOR USERS ONLY 11. Click Yes.
SCHICK PANORAMIC/CEPH USERS ONLY 12. Click Yes.
24 •
Patterson EagleSoft Digital Integration
13. Click Finish.
SCHICK WIRELESS USERS ONLY
14. Select Yes. Select No for all other devices. After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Schick Remote HS Hardware Installation
15. Insert the Remote HS drivers cd. Select Next.
16. Select Install.
Patterson EagleSoft Digital Integration
• 25
17. Select Finish
The driver is Microsoft Certified, so when the remote is plugged in, it auto installs the drivers.
Schick USB Sensor Hardware Installation
18. Select No, not this time. Select Next.
26 •
Patterson EagleSoft Digital Integration
19. Select Install the software automatically (Recommended). Select Next.
20. Select Finish.
21. Select No.
Patterson EagleSoft Digital Integration
• 27
Schick Wireless and SDX Hardware Installation
15. Select No, not this time. Select Next.
16. Select Install from automatically (Recommended). Select Next.
17. Select Finish.
28 •
Patterson EagleSoft Digital Integration
18. Select Yes. Schick iPan Hardware Installation
15. Select No, not this time. Select Next.
16. Select Install the software automatically (Recommended). Select Next.
Patterson EagleSoft Digital Integration
• 29
17. Select Finish.
Sirona Integration (All Devices) Current Sirona users do not need to reinstall after upgrading. NOTE: Sirona's Sidexis software MUST be installed and configured prior to installing Patterson EagleSoft Sirona Digital Integration. Contact Sirona for more information. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Sirona.
6. Under Sirona, select I/O - Panoramic.
30 •
Patterson EagleSoft Digital Integration
7. Click Next.
PANORAMIC USERS ONLY 8. Click Yes. Note: This installation installs both Panoramic and Sensor integration. SENSOR USERS ONLY
8. Click Yes.
9. Click Finish. After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Patterson EagleSoft Digital Integration
• 31
Soredex Optime Digital Integration Current Soredex users do not need to reinstall after upgrading. 1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Patterson EagleSoft Digital Integration. 2. Close all running programs. 3. Make a backup (same as daily backup). 4. Log on as the Administrator. 5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\digital.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK. Important: Install this integration only on the machine from which you will be using Optime.
6. Under Soredex, select Digora Optime
7. Click Next.
8. Click Yes.
32 •
Patterson EagleSoft Digital Integration
9. Click Install.
10. Click Finish.
After completing the digital installation, log on to EagleSoft. Select File | Preference | X-ray. In the X-ray tab, select the Digora Optime button under Device Properties. In the Settings tab under Scanner Connection, select from the following options: Direct Connection – Select this radio button if the Optime scanner is directly connected to this computer. Enter the Scanner serial number and select the Computer network connection from the drop-down list. IP based – Select this radio button if the scanner is being accessed over a network. Select the check box Enable changing IP address. Enter the IP address and select Send to Scanner. Multi-Connect – Select the checkbox Use MultiConnect to allow multiple computers on the network to access the scanner. Enter the Workstation identifier. Enter a value for the Scanner Autorelease timeout, seconds. Select OK on the X-ray tab to save your preferences.
Please review Patterson EagleSoft Hardware Requirements prior to adding new hardware to your system.
Patterson EagleSoft Digital Integration
• 33
34 •
Patterson EagleSoft Digital Integration
