Digital Media Gateway

Transcript

Digital Media Gateway DMG 3200 SWITCH IPIO Contr ol S tatus DMG 3200 S ync I n Data A Data B Control HI -DENSITY MODULAR HOT- SWAP The DMG 3200 is a feature-rich gateway product for a seemingly endless array of applications; ranging from digital turnaround, to modulation, descrambling, scrambling and even multiplexing. Dual form factors and modular architecture make it ideally suited to meet each customer’s unique system needs. An intuitive web GUI provides ease of management and complete control over all unit functionality, as well as extensive status of all input and output signals. Detailed alarming and management protocols, such as SOAP and SNMP, allow the DMG 3200 to be remotely managed or seamlessly integrated into existing management platforms. KEY FEATURES • 1RU and 4RU chassis • Gbit/s IP (electrical or optical), ASI, DVB-S/S2, DVB-T/2, 8VSB and DVB-C inputs • Any combination of inputs in the same chassis. Maximum: - 64 ASI - 32 DVB-S/S2, DVB-T/T2, DVB-C, 8VSB • Gbit/s IP (electrical or optical), ASI, COFDM, DVB-T/ T2 Terrestrial, DVB T/T2 Cable, and DVB-T/T2 Gateway, DVB-S/S2 outputs supporting MPTS and SPTS • Multiplexing • PSI/SI regeneration • PSI/SI/PSIP input analysis • Up to 32 DVB-CI slots for DVB descrambling APPLICATIONS • Central Head-end The ideal solution for deployments requiring aggregation of services from multiple sources, service processing and preparation for QAM broadcast over cable networks. • Remote Head-end With IP, 8VSB, ASI or DVB-T/T2 input sources, powerful edge processing capabilities, high density QAM output alongside Sencore’s receiver/decoder products options, operators can deliver all broadcast services. • Contribution High throughput ASI feeds, multiplexing functionality, and an easy to use user interface make dynamic service adjustments possible. • Regional Adaptation For insertion of local programming at regional broadcast locations. Transparent mode enables direct transport stream forwarding for network conversion applications. • Support for DVB-CA and AES bulk descrambling. Intergrates with Verimatrix and Latens • Support DVB and AES scrambling, simulcrypt interface based • Intuitive web-based user control • Dual redundant hot-swappable power supplies • Monitoring of power and fans • SNMP Alarm MIB • SOAP/XML Interface for external control SPECIFICATIONS Digital Media Gateway DMG 3200 SWITCH MODULE SPECIFICATIONS SWITCH MODULE INPUT INTERFACE SPECIFICATIONS IP INPUT Bitrate: Placement: Interface: Maximum data rate: Data format: Transport stream: Network de-jittering using PCR: FEC (SMPTE 2022-1): IP Input/Output Interface: Maximum data rate per port: Maximum number of services per port: Data format: Transport stream: Service filtering: Video format: IP Input IP de-jittering: Forward Error Correction: IP Output Multiplexing: Forward Error Correction: Tables Supported: PSI: SI: PSIP: Gbit/s routing between modules in a chassis 1 slot wide (4RU switch module must be placed in slot 0; redundant module in slot 17) 2 × 10/100/1000 Base-T Ethernet or SFP Optical SFP (class 1 laser product) Up to 850 MBit/s per port TS rate 250 UDP/RTP Multicast/Unicast SPTS and MPTS Yes Transport stream, MPEG-2 SD/HD and MPEG-4 SD/HD PCR or CBR SMPTE 2022-1 250 input streams per data port (licensed) Yes (licensed) SMPTE 2022-1 250 output streams per data port (licensed) PAT, PMT, CAT SDT, NIT, EIT pf , TOT, TDT, BAT, AIT MGT, TVCT, CVCT Frame Synchronization Input Interface: Accepts black burst and Tri-Level reference signal.* Management Interface: 10/100/1000 Base-T Ethernet Built-in user interface: Web External interface: SNMP for alarms, SOAP for configuration and status * If SDI reference signal support is needed, contact your sales representative. CLOCK REFERENCE GPS reference input Antenna connector: Impedance: 1pps timing accuracy: Active Antenna Voltage output: Internal reference hold-over: 1pps reference input Number of input ports: Input connector type: Impedance: Input level 1pps (1Hz): Internal reference hold-over: 10/100/1000 Base-T Ethernet and SFP interface Optical SFP (class 1 laser product) Up to 850 MBit/s UDP Multicast/Unicast, RTP SPTS and MPTS Yes 125 services DUAL IP IO IP Input/Output Interface: Operational mode: 2×10/100/1000 Base-T Ethernet and SFP The module can be configured to; · 1 input and 1 output · Seamless (Hitless) IP in · Cloned IP out · Dual IP in · Dual IP out Maximum data rate per port: Up to 850 Mbit/s per port in Seamless (Hitless) in, cloned out or 1×IPIN + 1×IPOUT Up to 850 Mbit/s sum of both ports in Dual IP in or Dual IP out mode Maximum number of services per port: 250 Data format: UDP/RTP Multicast/Unicast Transport stream: SPTS and MPTS Service filtering: Yes Video format: Transport stream, MPEG-2/4 (H264) SD/HD IP Input IP de-jittering: Yes, based on PCR or CBR Forward Error Correction: SMPTE 2022-1 250 input streams per data port (licensed) IP Output Multiplexing: Yes (licensed) Forward Error Correction: SMPTE 2022-1 250 output streams per data port (licensed) ASI INPUT 0V, 3.3V(default) or 5V Key reference specification: EN 50083-9 Connector: BNC female, 75Ω Number of inputs per module: 4 Maximum bit-rate per port: Up to 213.7Mbit/s (burst) ≤1us in 4 hrs @ΔT= 0˚C 8VSB/QAM INPUT 1 BNC female TTL or 50 Ω TTL Connector: F female, 75Ω Number of inputs per module: 4 demodulators Input Level: -34 to +40 dBmV Frequency range: 50 – 860 MHz Modulation: 8VSB, QAM Annex B Band: Broadcast SMA female 50 Ω < 100 ns RMS ≤1us in 4 hrs @ΔT= 0˚C 605.978.4600 www.sencore.com SPECIFICATIONS (cont) Digital Media Gateway DMG 3200 DVB-S/S2 INPUT Key reference specifications: Connector: Number of inputs per module: Decoding: DVB-S Constellation: DVB-S2 Constellation: DVB-S2 Constellation (Enhanced version): Symbol rate DVB-S: Symbol rate DVB-S2: Symbol rate DVB-S2 (Enhanced version): FEC DVB-S: FEC DVB-S2 QPSK: FEC DVB-S2 8PSK: FEC DVB-S2 (Enhanced version): DVB-S2 FEC frames: DVB-S2 FEC frames (Enhanced version): Input level: Input level (Enhanced version): Frequency range: LNB voltage: Maximum LNB supply current: LNB signaling: Multiple streams (Enhanced version): EN 300 421, EN 302 307 F female, 75Ω 4 LDPC and BCH QPSK QPSK, 8-PSK QPSK, 8-PSK, 16-APSK 1–45 MSym/s 5–30 MSym/s 1–45 MSym/s 1/2, 2/3, 3/4, 5/6, 7/8 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Normal frames Short and Normal frames -70 to -25 dBm -70 to -20 dBm (16 APSK, 9/10 code rate) 950–2150 MHz 0/13/18 Volt 400 mA LNB voltage + 22kHz continuous tone Yes, 1 per input port DVB-T INPUT Key reference specification: ETSI EN 300744 Connector: F female, 75Ω Number of inputs per module: 4 demodulators (one connector) Input level: -30 to -75 dBm (at 8MHz, 3/4, 64-QAM, gaussian channel) Frequency range: 47 – 862 MHz Channel bandwidth: 7 and 8 MHz Guard interval: 1/4, 1/8, 1/16, 1/32 Carrier mode: 2k, 8k Hierarchy stream: High and low priority Hierarchy mode: All Carrier modulation: QPSK, 16QAM, 64QAM FEC code rate: 1/2, 2/3, 3/4, 5/6, 7/8 Spectral inversion: Automatic DVB-T2 Key reference specification: ETSI EN 302755, Nordig 2.1 FFT Size: 1k, 2k, 4k, 8k, 8k extended, 16k, 16k extended, 32k, 32k extended Guard Interval: 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 FEC frame: Normal (64k), Short (16k) FEC code rate (PLP): 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 Constellation (PLP): QPSK, 16-QAM, 64-QAM, 256-QAM Channel bandwidth: 5, 6, 7 or 8 MHz Pilot pattern: P1–P8 SISO and MISO transmission: Yes Single and Multiple-PLPs: Yes Spectral inversion: Automatic Rotated constellation: Automatic DVB-C INPUT Key reference specification: EN 300 429, ITU-T J83 annex A, and C Connector: F female, 75Ω Number of inputs per module: 4 demodulators (one connector) Frequency range: 47–862 MHz Channel bandwidth: 6, 7 and 8 MHz QAM Mode: 4, 16, 32, 64, 128, 256 QAM Symbol rate: 0.87-7.2 Mbaud Spectrum inversion: Automatic Input power level: - 30 to -65 dBm (at 256 QAM, 6.9 Ms/s) PROCESSING SPECIFICATIONS BULK DESCRAMBLING Interface: CA system support: BISS support: Maximum data rate: Number of services per module: Scrambling algorithms: SW based smart card Please contact Sencore Mode 1 Up to 850 MBit/s 250 DVB-CA and AES SIM BULK DESCRAMBLING DVB-T/T2 INPUT Number of DVB-T/T2 inputs per module: Input connector: Input connector configurations: Input frequency range: Input level range: Minimum return loss: DVB-T Key reference specification: ETSI EN 300744, Nordig 2.0 FFT Size: 2k, 8k Guard Intervals: 1/4, 1/8, 1/16, 1/32 FEC code rate: 1/2, 2/3, 3/4, 5/6, 7/8 Constellation: QPSK, 16-QAM, 64-QAM Channel bandwidth: 6, 7, or 8 MHz Hierarchy stream: High and Low priority Hierarchy mode: All Spectral inversion: Automatic 4 F-female, 75 Ω 1 F connector internally split or 4 F connectors 47–862 MHz - 80 to -10 dBm (at T2, 8MHz, 256 QAM, 3/5, gaussian channel) 10 dB Interface: Number of SIM card readers: CA system support: BISS support: Maximum data rate: Number of services per module: Scrambling algorithms: SIM based smart card 8 in front and 8 behind front plate (Only 8 in front can be replaced while in operation) Conax Mode 1 Up to 850 MBit/s 250 DVB-CA and AES 605.978.4600 www.sencore.com SPECIFICATIONS (cont) Digital Media Gateway DMG 3200 DVB DESCRAMBLING Interface: CA system support: Number of services per CAM: DVB Common Interface BetaCrypt, Conax, Cryptoworks, Irdeto, Mediaguard, Viaccess, NDS Viasat, Nagra ASI OUTPUT DVB-CA and AES Up to 850 MBit/s 250 (depending on SW license) Transport stream, MPEG-2 SD/HD and MPEG-4 SD/HD Simulcrypt interface 4 CA systems simultaneously Yes Yes for DVB No for AES OUTPUT MODULE SPECIFICATIONS IP OUTPUT Interface: Maximum data rate: Maximum number of services: Data format: Output mode: Forward Error Correction: 10/100/1000 Base-T Ethernet output and SFP interface Optical SFP (class 1 laser product) Up to 850 MBit/s 250 UDP Multicast/Unicast, RTP CBR and VBR on SPTS SMPTE 2022-1 250 output streams per data port (licensed) DUAL IP IO IP Input/Output Interface: Operational mode: Maximum data rate per port: Maximum number of services per port: Data format: Transport stream: Service filtering: Video format: IP Input IP de-jittering: Forward Error Correction: Yes (licensed) SMPTE 2022-1 250 output streams per data port (licensed) 10 (requires multi service CAM) SCRAMBLING Scrambling algorithm: Maximum data rate: Number of services per scrambler card: Video format: Interface towards CA System: Number of CA systems: EMM: Entropy reduction: IP Output Multiplexing: Forward Error Correction: 2×10/100/1000 Base-T Ethernet and SFP The module can be configured to; · 1 input and 1 output · Seamless (Hitless) IP in · Cloned IP out · Dual IP in · Dual IP out Up to 850 Mbit/s per port in Seamless (Hitless) in, cloned out or 1×IPIN+1×IPOUT Up to 850 Mbit/s sum of both ports in Dual IP in or Dual IP out mode 250 UDP/RTP Multicast/Unicast SPTS and MPTS Yes Transport stream, MPEG-2/4 (H264) SD/HD Yes, based on PCR or CBR SMPTE 2022-1 250 input streams per data port (licensed) Key reference specification: EN50083-9 Connectors: 4 BNC female, 75Ω Number of outputs per module: 4 different Transport Streams Maximum bit-rate per port: burst mode: 213.7Mbit/s spread mode: 72Mbit/s Transport stream output: SPTS and MPTS Number of services per card: 250 (sum of all 4 ports) Output format: Constant bit-rate QAM OUTPUT Key reference specifications: Interface: Number of carriers: Number of QAM frequencies per module: Modulation: Symbol rate: Frequency range: Spectrum inversion: Test mode: Channel spacing: Frequency step size: Frequency stability: Output level: Output level stability: Output level adjustment step size (GUI): MER: Return loss: Spurious: EN 300 429, ITU J.83.ABC 2 × F connector female, 75 Ω 3 and 4 per group (adjacent channels) up to 16 carriers in 4 groups, 8 per port 32 / 64 / 128 / 256 - QAM 4.48 to 7.00 Mbaud (Annex A and C) 47–862 MHz user selectable CW 5, 6, 7, 8 MHz (12 MHz available for 3 carrier groups) 1 Hz 2 ppm -12 to +2.2dBm per carrier ± 0.5 dB 0.1 dB > 42 dB >16 dB typ < -60 dBc DVB-S/S2 MODULATOR, IF Key reference specification: EN 300 421 , EN 302 307 Number of DVB-S/S2 outputs per module: 2 Monitoring ports: 1 per output (30 dB attenuated) Output connector: F-type female, 75 Ω (RF Out and Test out) Output frequency (center): 70–200 MHz Output level: -15 to 0 dBm Output level stability: ± 0.5 dB Frequency stability: 2 ppm Return loss: >16 dB Spurious: typ < -60 dBc In-band flatness: typ < ± 0.1 dB Spectrum inversion: user selectable Precorrection: Static. Linear and non-linear DVB-S Coding and Modulation Constellation: QPSK Modulation mode: Constant 605.978.4600 www.sencore.com SPECIFICATIONS (cont) Digital Media Gateway DMG 3200 FEC outer: FEC inner: Code rates: Symbol rate: RS (188, 204) Viterbi 1/2, 2/3, 3/4, 5/6, 7/8 0.5–45 Mbaud DVB-S2 Coding and Modulation Constellation: QPSK, 8-PSK, 16-APSK, 32-APSK Modulation mode: CCM FEC: BCH/LDPC Code rates: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Frame length: 16200 bits (short), 64800 bits (long) Symbol rate: 0.5–45 Mbaud Roll off: 0.20, 0.25, and 0.35 DVB-S/S2 MODULATOR, L BAND Key reference specification: EN 300 421 , EN 302 307 Number of DVB-S/S2 outputs per module: 2 Monitoring ports: 1 per output (30 dB attenuated) Output connector: SMA female, 50Ω (RF out) F-type female, 75Ω (Test out) Output frequency: 950–2150 MHz Output level: -20 to 5 dBm Output level stability: ± 0.5 dB Frequency accuracy: 2 ppm Return loss: >14 dB Spectrum inversion: user selectable Spurious: < -65 dBc/4kHz (@ symbol rate ≥ 256 kb/s) In-band flatness: typ < ± 0.1 dB Precorrection: Static. Linear and non-linear DVB-S Coding and Modulation Constellation: QPSK Modulation mode: Constant FEC outer: RS (188, 204) FEC inner: Viterbi Code rates: 1/2, 2/3, 3/4, 5/6, 7/8 Symbol rate: 0.5–45 Mbaud DVB-S2 Coding and Modulation Constellation: QPSK, 8-PSK, 16-APSK, 32-APSK Modulation mode: CCM FEC: BCH/LDPC Code rates: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 Frame length: 16200 bits (short), 64800 bits (long) Symbol rate: 0.5–45 Mbaud Roll off: 0.20, 0.25, and 0.35 DVB-T CABLE MODULATOR Key reference specification: ETSI EN 300744 Number of carriers: 4 independent carriers Number of output ports: 2 (2 carriers per port) Output connector: F-type Impedance: 75 Ω Output frequency: 47–862 MHz Frequency setting step size: 1 Hz Output level: -12 to 2.2 dBm Output level stability: ± 0.5 dB Frequency accuracy: Return loss: MER: Test mode: 2 ppm >16 dB > 42 dB CW DVB-T Coding and Modulation FFT size: 2k, 8k Guard intervals: 1/4, 1/8, 1/16, 1/32 Code rates: 1/2, 2/3, 3/4, 5/6, 7/8 Constellation: QPSK, 16-QAM, 64-QAM Channel bandwidth: 5, 6, 7, 8 MHz DVB-T2 CABLE MODULATOR Key reference specification: ETSI EN 302755 Number of carriers: 2 independent carriers Number of output ports: 2 (1 carrier per port) Output connector: F-type Impedance: 75 Ω Output frequency: 47-862 MHz Frequency setting step size: 1 Hz Output level: -12 to 2.2 dBm (TBD) Output level stability: ± 0.5 dB Frequency accuracy: 2 ppm Return loss: >16 dB MER: > 42 dB Test mode: CW DVB-T2 Coding and Modulation FFT size: 1k, 2k, 4k, 8k, 8k extended, 16k, 16k extended, 32k, 32k extended Guard intervals: 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 FEC frame: Normal (64k), Short (16k) FEC code rate: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 Constellation (PLP): QPSK, 16-QAM, 64-QAM, 256-QAM Channel bandwidth: 1.7, 5, 6, 7, 8, or 10 MHz Pilot pattern: P1–P8 Number of PLPs: 1 DVB-T/T2 MODULATOR (EXCITER) Key reference specification: ETSI EN 302755 , ETSI EN 300744 Number of carriers: 2 independent carriers Number of output ports: 2 (1 carrier per port) Output connector: BNC Impedance: 50 Ω Output frequency: 47-862 MHz Frequency setting step size: 1 Hz Output level: -15 to 0 dBm Output level stability: ± 0.5 dB Frequency accuracy: 2 ppm Return loss: >16 dB MER: > 42 dB Test mode: CW DVB-T Coding and Modulation Input: TS with MIP (SFN) or remultiplexed TS FFT size: 2k, 8k Guard intervals: 1/4, 1/8, 1/16, 1/32 Code rates: 1/2, 2/3, 3/4, 5/6, 7/8 Constellation: QPSK, 16-QAM, 64-QAM Channel bandwidth: 5, 6, 7, 8 MHz 605.978.4600 www.sencore.com SPECIFICATIONS (cont) Digital Media Gateway DMG 3200 DVB-T2 Coding and Modulation Input: T2MI (SFN) or remultiplexed TS SFN: Relative timestamps within 1000 ms T2 versions: 1.1.1 and 1.2.1 FFT size: 1k, 2k, 4k, 8k, 8k extended, 16k, 16k extended, 32k, 32k extended Guard intervals: 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 FEC frame: Normal (64k), Short (16k) FEC code rate: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 Constellation (PLP): QPSK, 16-QAM, 64-QAM, 256-QAM Channel bandwidth: 1.7, 5, 6, 7, 8, or 10 MHz Pilot pattern: P1–P8 Number of PLPs: up to 128 DVB-T/T2 GATEWAY ASI Connectors: 4 x BNC 75Ω Number of MPTS’s with MIP: 4 Number of T2MI streams: 2 Maximum ASI bit-rate per port: Spread Mode: 72Mbit/s Burst Mode: 213Mbit/s Re-multiplexing: See common output module specifications DVB-T MIP Inserter Key specification: Relative timestamps: DVB-T2 T2MI Key reference specifications: T2 version: T2MI signaling: Clock modes: PAPR: MISO/SISO: Guard intervals: FFT sizes: Pilot Patterns: L1 Constellations: Bandwidth: DVB-T2 PLP support Number of PLPs: PLP mode: PLP types: TI types: Automatic calculation: FEC frame: FEC code rate: Constellations: Rotated constellations: ISSY supported: ETSI EN 300 744, ETSI TS 101 191 <1s EN50083-9, ETSI EN 302 755, ETSI TS 102 773 1.1.1 and 1.2.1 T2MI is signaled in PSI/SI as a data service Relative Timestamps <1s (SFN) and Null timestamps (MFN) TR and ACE (global on/off) Yes 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 1k, 2k, 4k, 8k, 8k extended, 16k, 16k extended, 32k, 32k extended P1 – P8 QPSK, 16-QAM, 64-QAM, BPSK 1.7, 5, 6, 7, 8, 10MHz 240 in total between all T2MI streams HEM, constant bit-rate 1 and 2 Within a T2 frame and across multiple T2 frames FEC blocks, TI blocks, TI frames and TI type Normal (64k), Short (16k) 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 QPSK, 16-QAM, 64-QAM, 256-QAM Yes Yes Maximum data rate: Output mode: Data format: Support for cloned output: Forward Error Correction: Re-multiplexing: Up to 850 MBit/s CBR UDP/RTP Multicast/Unicast Yes SMPTE 2022-1 (Licensed) See common output module specifications DVB-T MIP inserter Key specification: Relative timestamps: ETSI EN 300 744, ETSI TS 101 191 <1s DVB-T2 T2MI Key reference specifications: T2 version: System redundancy: Regionalization: T2MI signaling: Clock modes: PAPR: MISO/SISO: Guard intervals: FFT sizes: Pilot Patterns: L1 Constellations: Bandwidth: EN50083-9, ETSI EN 302 755, ETSI TS 102 773 1.1.1 and 1.2.1 1+1 protection on unit with T2MI frame (licensed) Output redundancy based on OSPF (licensed) Network level redundancy (licensed) Yes. Please contact Sencore for more information T2MI is signaled in PSI/SI as a data service Relative Timestamps <1s (SFN) and Null timestamps (MFN) TR and ACE (global on/off) Yes 1/4, 19/128, 1/8, 19/256, 1/16, 1/32, 1/128 1k, 2k, 4k, 8k, 8k extended, 16k, 16k extended, 32k, 32k extended P1 – P8 QPSK, 16-QAM, 64-QAM, BPSK 1.7, 5, 6, 7, 8, 10MHz DVB-T2 PLP support Number of PLPs: PLP mode: PLP types: TI types: Automatic calculation: FEC frame: FEC code rate: Constellations: Rotated constellations: ISSY supported: 240 in total between all T2MI streams HEM, constant bit-rate 1 and 2 Within a T2 frame and across multiple T2 frames FEC blocks, TI blocks, TI frames and TI type Normal (64k), Short (16k) 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 QPSK, 16-QAM, 64-QAM, 256-QAM Yes Yes DVB-T2 GATEWAY IP Connectors: 2 × 10/100/1000 Base-T Ethernet output or 2× Optical SFP (class 1 laser product) Number of MPTS’s with MIP: 4 Number of T2MI streams: 4 605.978.4600 www.sencore.com SPECIFICATIONS (cont) Digital Media Gateway DMG 3200 ENVIRONMENTAL CONDITIONS Operational Conditions Temperature: Humidity: 0 to +40 °C 5–95% (non-condensing) Storage Temperature: Humidity: -20 to +70 °C 5 to 95% (non-condensing) Electrical Safety IEC 60950-1 EMC EN 55022, EN55013, EN50083-2, EN55024, EN61000-3-2, EN61000-3-3, FCC CFR 47 Part 15 RoHS Compliant WEEE Compliant CHASSIS DMG 3200-4 Physical dimensions: 19” × 4RU × 400mm (440 × 177 × 400 mm) Power Supply Power: Input voltage: Redundancy: Monitoring: 800 Watt 100-240 V AC, 50/60 Hz Yes, dual hot swappable PS Via WEB GUI and LED indicators on PS Cooling Fans: Hot swap of fans: Airflow direction: 4 fans Yes, fans are independently hot swappable Front to back DMG 3200-1 Physical dimensions: 19” × 1RU × 400mm (440 × 44 × 480 mm) Power Supply Power: Input voltage: Redundancy: Monitoring: 400 Watt 100-240 V AC, 50/60 Hz optional: -48V DC Yes, dual hot swappable PS Via WEB GUI and LED indicators on PS Cooling Fans: Hot swap of fans: Airflow direction: 6 fans Yes, common fan module with all 6 fans Front to back 605.978.4600 www.sencore.com