Transcript
Digital Thermometer DT-01C
Digital Thermometer DT-01C
Operating Instructions
Operating Instructions
Please read carefully before using This thermometer is a very sensitive device, obtaining results accurately and quickly. It is easy to use, quick and highly accurate.
Please read carefully before using This thermometer is a very sensitive device, obtaining results accurately and quickly. It is easy to use, quick and highly accurate.
Specifications
Specifications
Range Accuracy Display Power Consumption Battery Battery life Dimensions Weight Alarm
32 - 41.9˚C ±0.1˚C (between 35˚C and 39˚C) ±0.2˚C (under 35˚C and over 39˚C) Liquid Crystal Display, 31/2 digits 0.15 millitate in measurement mode 1 x 1.5V button type AG3 About 100 hours under continuous operation 1.4cm x 2.2cm x 12.9cm Approx. 10.5 grams Approx. 5 secs sound signal when peak temperature reached
Range Accuracy Display Power Consumption Battery Battery life Dimensions Weight Alarm
How to use
How to use
1. 2. 3.
1. 2. 3.
4. 5.
6. 7.
Before using disinfect the probe with alcohol Press the on/off button. The display will read 188.8˚E, and a beep sound will be heard. The thermometer will display the last temperature memory record for about 2 seconds, the display L˚C/L˚F flashing, then the thermometer is ready for use. Place the probe under the tongue keeping the mouth closed. The measurement process takes about 2 minutes. When measured the ˚C will stop flashing and the alarm signal will sound for about 5 seconds, telling the user the measurement has been completed. The temperature on the thermometer display is the patient’s body temperature. The thermometer will automatically shut off in 10 minutes after using, but it is recommended to turn the power off manually after measurement in order to save battery energy.
4. 5.
6. 7.
Before using disinfect the probe with alcohol Press the on/off button. The display will read 188.8˚E, and a beep sound will be heard. The thermometer will display the last temperature memory record for about 2 seconds, the display L˚C/L˚F flashing, then the thermometer is ready for use. Place the probe under the tongue keeping the mouth closed. The measurement process takes about 2 minutes. When measured the ˚C will stop flashing and the alarm signal will sound for about 5 seconds, telling the user the measurement has been completed. The temperature on the thermometer display is the patient’s body temperature. The thermometer will automatically shut off in 10 minutes after using, but it is recommended to turn the power off manually after measurement in order to save battery energy.
Notice
Notice
1. 2. 3.
1. 2. 3.
4. 5.
Do not bend, drop or disassemble the thermometer. Do not put the thermometer in water. The display and the battery cover should not be wet. Do not boil the probe, instead clean the unit by wiping it with a dry cloth and sterilize the probe with ethyl alcohol. Avoid storing the thermometer in direct sunlight. Do not open the thermometer except for replacing the battery.
4. 5.
32 - 41.9˚C ±0.1˚C (between 35˚C and 39˚C) ±0.2˚C (under 35˚C and over 39˚C) Liquid Crystal Display, 31/2 digits 0.15 millitate in measurement mode 1 x 1.5V button type AG3 About 100 hours under continuous operation 1.4cm x 2.2cm x 12.9cm Approx. 10.5 grams Approx. 5 secs sound signal when peak temperature reached
Do not bend, drop or disassemble the thermometer. Do not put the thermometer in water. The display and the battery cover should not be wet. Do not boil the probe, instead clean the unit by wiping it with a dry cloth and sterilize the probe with ethyl alcohol. Avoid storing the thermometer in direct sunlight. Do not open the thermometer except for replacing the battery.
Battery Replacement
Battery Replacement
1.
1.
2. 3.
If the display becomes fuzzy or black when a reading is being taken it indicates the battery needs to be replaced. Remove the battery cover and take out the battery with a pointed object such as a pen or a toothpick. Place a new battery type AG3, with the positive side up and replace the battery cover.
2. 3.
If the display becomes fuzzy or black when a reading is being taken it indicates the battery needs to be replaced. Remove the battery cover and take out the battery with a pointed object such as a pen or a toothpick. Place a new battery type AG3, with the positive side up and replace the battery cover.
Digital Thermometer DT-01C
Digital Thermometer DT-01C
Operating Instructions
Operating Instructions
Please read carefully before using This thermometer is a very sensitive device, obtaining results accurately and quickly. It is easy to use, quick and highly accurate.
Please read carefully before using This thermometer is a very sensitive device, obtaining results accurately and quickly. It is easy to use, quick and highly accurate.
Specifications
Specifications
Range Accuracy Display Power Consumption Battery Battery life Dimensions Weight Alarm
32 - 41.9˚C ±0.1˚C (between 35˚C and 39˚C) ±0.2˚C (under 35˚C and over 39˚C) Liquid Crystal Display, 31/2 digits 0.15 millitate in measurement mode 1 x 1.5V button type AG3 About 100 hours under continuous operation 1.4cm x 2.2cm x 12.9cm Approx. 10.5 grams Approx. 5 secs sound signal when peak temperature reached
Range Accuracy Display Power Consumption Battery Battery life Dimensions Weight Alarm
How to use
How to use
1. 2. 3.
1. 2. 3.
4. 5.
6. 7.
Before using disinfect the probe with alcohol Press the on/off button. The display will read 188.8˚E, and a beep sound will be heard. The thermometer will display the last temperature memory record for about 2 seconds, the display L˚C/L˚F flashing, then the thermometer is ready for use. Place the probe under the tongue keeping the mouth closed. The measurement process takes about 2 minutes. When measured the ˚C will stop flashing and the alarm signal will sound for about 5 seconds, telling the user the measurement has been completed. The temperature on the thermometer display is the patient’s body temperature. The thermometer will automatically shut off in 10 minutes after using, but it is recommended to turn the power off manually after measurement in order to save battery energy.
4. 5.
6. 7.
Before using disinfect the probe with alcohol Press the on/off button. The display will read 188.8˚E, and a beep sound will be heard. The thermometer will display the last temperature memory record for about 2 seconds, the display L˚C/L˚F flashing, then the thermometer is ready for use. Place the probe under the tongue keeping the mouth closed. The measurement process takes about 2 minutes. When measured the ˚C will stop flashing and the alarm signal will sound for about 5 seconds, telling the user the measurement has been completed. The temperature on the thermometer display is the patient’s body temperature. The thermometer will automatically shut off in 10 minutes after using, but it is recommended to turn the power off manually after measurement in order to save battery energy.
Notice
Notice
1. 2. 3.
1. 2. 3.
4. 5.
Do not bend, drop or disassemble the thermometer. Do not put the thermometer in water. The display and the battery cover should not be wet. Do not boil the probe, instead clean the unit by wiping it with a dry cloth and sterilize the probe with ethyl alcohol. Avoid storing the thermometer in direct sunlight. Do not open the thermometer except for replacing the battery.
4. 5.
32 - 41.9˚C ±0.1˚C (between 35˚C and 39˚C) ±0.2˚C (under 35˚C and over 39˚C) Liquid Crystal Display, 31/2 digits 0.15 millitate in measurement mode 1 x 1.5V button type AG3 About 100 hours under continuous operation 1.4cm x 2.2cm x 12.9cm Approx. 10.5 grams Approx. 5 secs sound signal when peak temperature reached
Do not bend, drop or disassemble the thermometer. Do not put the thermometer in water. The display and the battery cover should not be wet. Do not boil the probe, instead clean the unit by wiping it with a dry cloth and sterilize the probe with ethyl alcohol. Avoid storing the thermometer in direct sunlight. Do not open the thermometer except for replacing the battery.
Battery Replacement
Battery Replacement
1.
1.
2. 3.
If the display becomes fuzzy or black when a reading is being taken it indicates the battery needs to be replaced. Remove the battery cover and take out the battery with a pointed object such as a pen or a toothpick. Place a new battery type AG3, with the positive side up and replace the battery cover.
2. 3.
If the display becomes fuzzy or black when a reading is being taken it indicates the battery needs to be replaced. Remove the battery cover and take out the battery with a pointed object such as a pen or a toothpick. Place a new battery type AG3, with the positive side up and replace the battery cover.
