INPUT
Installation Instruction for hearTV
INPUT
OUTPUT
Digital to Analog Converter (DAC)
golanA ot latigiD redoceD oiduA
Digital to Analog Audio Decoder
TUPTUO
IN THIS BOX
DAC
hearTV.com SPDIF Cable
For additional support, visit support.hearTV.com or call (800) 334-3620 6 am to 6 pm Mon — Fri
POWER ADAPTER
INPUT
OUTPUT
Digital to Analog Audio Decoder
R
1
L
Determine which type of output your TV has: DIGITAL AUDIO OUT Optical
ANALOG AUDIO OUT (DAC not required) Coaxial
RCA
3.5 mm R
R
L
R
R L
L
L
R R
L
If your TV has analog outputs, the DAC is not required
P lug the appropriate digital audio cable
2
6
to your TV’s digital audio output.
black ends of the SPDIF
RCA adapter into
OUTPUT
R
If using the included digital SPDIF R
the connector when fully inserted.
on the DAC 7
OUTPUT L
R
R
L
R P lug the 3.5 mm end ofL the cable into the audio R
L
input port on the front of your hearTV transmitter.
RCA cable.
COAXIAL
OUTPUTOUTPUT
OU
OUTPUT
INPUT
C onnect the other end of the digital audio cable
3
to the SPDIF or COAXIAL input on the DAC SPDIF
COAXIAL
DC5V
USB/POWER
INPUT
DC5V
TUPTUO SPDIF
INPUT
USB/POWER
SPDIF
COAX
R
COAX
SPDIF
SPDIF
COAXIAL COAXIAL
R L
8
DC5V
DC5V
L
L
R
L
to the DC5V input on the DAC.
S et the switch on the side of the DAC to the type of
R
C onnect the included power supply L
R
INPUT USB/POWER USB/POWER
SPDIF SPDIF COAX COAX
digital input being used. 5
L
OUTPUT
required, you may use any standard
4
R
R and L outputs
L
If a digital coaxial connection is
COAXIAL
OUTPUT
L
the red and white
cable, ensure the cable snaps into
INPUT
OUTPUT
P lug the red and
Your hearTV transmitter included two audio cables: a 3.5 mm to 3.5 mm cable and a short 3.5 mm to RCA adapter. INPUT Connect these cables together.
SPDIF
COAXIAL
DC5V XAOC
TUPTUO
CAUTION: Do not connect the power supply for your hearTV USB/POWER SPDIF COAX transmitter to the DAC, as this will damage the DAC. L
9
R
P lug the other end of
TUPNI
the power supply into SPDIF
COAXIAL
DC5V
the electrical outlet.
V5CD
XAOC
FIDPS
REWOP/BSU
LAIXAOC