Transcript
DIS-2/M DecoderPro HD Decoder, Stand-alone, 1× IP Channel, 1080p
The DIS-2/M DecoderPro HD is an audio and video decoder. It is able to receive audio and video streams in various encodings via an Ethernet network (unicast or multicast), to decode, and to output them in real-time via its BNC or HDMI interface. The DIS-2/M DecoderPro HD is a stand-alone device. Its compact and robust design allows for a flexible use.
Features ■■ 1× IP audio and video channel ■■ Supports network cameras by Dallmeier and third-party suppliers ■■ Supported video formats: MPEG-2, MPEG-4, H.264 ■■ Supported audio formats: MPEG-1 Layer 2, G.711 ■■ Supported frame rate: up to 50 fps / 60 fps ■■ Supported resolutions: SD, HD (720p, 1080i, 1080p) ■■ Supported bit rate: up to 16 Mbps (constant or dynamic) ■■ Simultaneous decoding and output
■■ Fast display (short delay of less than 100 ms) ■■ BNC output SDTV (PAL/NTSC) ■■ HDMI output HDTV (SMPTE 296M, SMPTE 274M), Full HD ■■ Supports upscaling from SDTV to HDTV ■■ Configuration with web browser over Ethernet ■■ User administration integrated ■■ Linux operating system (proprietary and hardened) on flash memory
Variants DIS-2/M DecoderPro HD Decoder module, without HDD, 1× video channel
V2.0.1
2013-09-11
Specifications subject to change without notice. Errors and misprints excepted.
© 2013 Dallmeier electronic
002154
All trademarks identified by ® are registered trademarks of Dallmeier electronic.
www.dallmeier.com
DIS-2/M DecoderPro HD Decoder, Stand-alone, 1× IP Channel, 1080p
Specifications
Video standard SDTV (PAL/NTSC) Video standard HDTV (SMPTE 296M, SMPTE 274M), Full HD Upscaling from SDTV to HDTV Simultaneous decoding and output – – Integrated Linux (proprietary, hardened) Dallmeier DIS decoder software English, German, French, Spanish, Italian (others on request) SMAVIA Viewing Client, SeMSy® III Web browser
Hardware Flash module Hard disks Max. storage capacity
1× (for operating system only) – –
Interfaces Video OUT Audio OUT Ethernet Ethernet protocols Serial
1× HDMI 1× BNC, CVBS 1× 3.5 mm phone jack (Stereo) 1× RJ45, 10/100 Mbps IPv4, TCP, UDP, ARP, ICMP, DHCP, NTP, HTTP, RTSP, IGMP V2, RTP, RTCP 1× RS232, RJ12
Electrical Data Voltage supply Power consumption Thermal output
12 V AC ±5% Max. 25 W Max. 85 BTU/h
Mechanical Data Dimensiosn (W × H × D) Weight
Approx. 110 × 44 × 245 mm (approx. 4.3 × 1.7 × 9.6 inches) Approx. 1 kg (approx. 2.2 lb)
Ambient Data Temperature Recommended temperature Humidity Atmospheric load
+5°C up to +40°C (41°F – 104°F) +20°C up to +25°C (68°F – 77°F) 5 – 70% RH, non-condensing Dust-free
Approvals and Certifications Type
CE
V2.0.1
2013-09-11
Software Operating system Application Application language External management software External configuration software
© 2013 Dallmeier electronic
Video OUT Video OUT BNC Video OUT HDMI Integrated Functions Operating mode Motion detection SmartFinder User administration
1× IP audio and video channel (SD-IP / HD-IP) Network cameras by Dallmeier and third-party suppliers MPEG-2, MPEG-4, H.264 MPEG-1 Layer 2, G.711 Up to 50 fps / 60 fps SD, HD (720p, 1080i, 1080p) Up to 16 Mbps (constant or dynamic)
Specifications subject to change without notice. Errors and misprints excepted.
Video IN Video channels Supported cameras Supported video formats Supported audio formats Supported frame rate Supported resolution Supported bit rate
All trademarks identified by ® are registered trademarks of Dallmeier electronic.
www.dallmeier.com
DIS-2/M DecoderPro HD Decoder, Stand-alone, 1× IP Channel, 1080p
Dimensions
44 mm 1.7"
263 mm 10.4"
245 mm 9.6"
V2.0.1
2013-09-11
Specifications subject to change without notice. Errors and misprints excepted.
© 2013 Dallmeier electronic
110 mm 4.3"
All trademarks identified by ® are registered trademarks of Dallmeier electronic.
www.dallmeier.com
