Preview only show first 10 pages with watermark. For full document please download

Disobedient Objects Flone

   EMBED

Share

Transcript

FLONE N A5 C1 A4 C16 C2 C7 R4 R5 C14 C13 C12 A3 A2 A1 A0 4 13 32U4 SF Lable R7 R3 D2 D1 R2 11 6 5 10 9 12 BAT 1 2 3 C1 C2 6 C1 C7 N R4 R7 R5 R3 4 C1 A 3 5 C1 D2 A 2 4 C1 D1 3 A R2 2 A 1 U 2 bl A 3 A 0 4 4 a L 3 F 1 S 1 1 e 6 5 0 1 9 2 1 T A B Each motor has three cable connections to the PDB. Connect each wire. Put in the battery and test that the motor rotates in the direction indicated by the arrows. Solder in place. C1 4 C2 6 C1 C7 N R4 R7 R5 R3 4 C1 A 3 5 C1 D2 A 2 4 C1 D1 3 A R2 2 A 1 2 A 3 0 4 a L 4 A U 1 1 e l 3 F 1 b S 6 5 1 0 9 1 2 A B T Solder battery and cable connections on the Power Distribution Board. Attach PDB, Flight Control Board and DSM2 radio to electronics board. Configure FCB by USB. Check the propellers are all the right way up and attach them. 5 Laser-cut or jigsaw-cut the frame, using the pattern downloadable from flone.aeracoop.net. Glue the frame together (reinforcement arms, legs, electronics plate). Attach the motors with cable ties. For more detailed instructions, please visit flone.aeracoop.net Disobedient Objects Attach sponge to protect the phone. Screw the electronics plate into place. Cable tie any loose cable, attach the battery via Velcro straps and attach foam legs for soft landings. Strap your phone in. You are ready for a test-flight.