Preview only show first 10 pages with watermark. For full document please download

Displayport 1×4 Splitter

   EMBED


Share

Transcript

DisplayPort 1×4 Splitter INTRODUCTION: The DSP-104 is a 1 input to 4outputs DisplayPort dual mode splitter designed to allows any single DisplayPort enabled computer the ability to be displayed on four DisplayPort monitors simultaneously. This unit supports video resolution up to 4K2K and PCM Audio 7.1 Ch up to 192 kHz sample rate. FEATURES: ● Supports HBR2 speed, a data rate of 5.4 Gbps per lane with a total bandwidth of 21.6 Gbps link rate. ● HDMI link rate: 3.2 Gbps/data pair max ● Supports dual mode DisplayPort ● 4K2K @60 Hz: 24 bits/pixel in DP 1.2a configuration ● 1920 x 1080 (FHD) 240 Hz, 24 bits/pixel ● All 3D formats defined in DP 1.2a and HDMI 1.4 standards ● All audio formats as specified in DP 1.2a and HDMI 1.4 standards ● Supports SST or MST Quick Installation Guide Ver. 1.0 SYSTEM REQUIREMENTS DisplayPort or Mini DisplayPort output source equipment with DisplayPort input monitors. SPECIFICATIONS: All brand names and trademarks are properties of their respective owners 1 x DisplayPort 4x DisplayPort Black 0℃ ~40℃ -20℃ ~60℃ 20~90% RH (non-condensing) Input port Output port Color Operating Temperature Storage Temperature Relative Humidity 2 1 Layout: PACKAGE CONTENTS: ● DSP-104 ● Power Adapter ● Quick installation guide Power Switch POWER LED CONNECTION AND INSTALLATION LINIK LED OR OUT PUT OUT PUT DP IN OUT PUT OUT PUT OR DC 5V DP to DP Cable Or Mini DP to DP Cable ● Power Switch: The power switch turns the unit on and off. The LED will illuminate to indicate that the switcher is ON ● Power LED: The LED will illuminate in green when powered on ● LINK LED: When the device detects the display, the Link LED will illuminate. ● DP OUT 1&2&3&4: Connect the DP cable or MDP to DP cable to your MDP/DP input display for dis¬playing a single source on four screens simultaneously. ● DP IN: Connect the DP cable or MDP to DP cable from the DP/MDP source for signal sending. ● 5V/DC, 2 A: Connect the 5 V/DC, 2A power supply into the splitter and Plug the adaptor to AC wall outlet. OR Mac monitor 3 LCD monitor 4