Preview only show first 10 pages with watermark. For full document please download

Ditek Tpv Series Datasheet

   EMBED

Share

Transcript

DTK-TPV Series Twisted Pair Video Camera Surge Protector General Product Specifications DITEK’s TPV series of video surge protectors address a key vulnerability of Twisted Pair Video CCTV systems – the video wire. Lacking even the minimal amount of protection that a shielded coaxial line has, Twisted Pair Video systems are vulnerable to surges entering on the unshielded video wiring, potentially damaging cameras, converters, or head end equipment. DTK-1TPV DTK-2TPV Application Features DTK-4TPV • 1, 2 or 4 pair models available to protect single or multiple video lines • Suitable for use at the camera, converter, or DVR • Hybrid design provides the best possible protection • Single point ground improves protection and speeds installation Technical Specifications Product Features • Connection Method: #26 - #16 AWG • Band Pass Range: 0Hz – 10MHz • Insertion Loss: < 0.5dB up to 10MHz • Protection Modes: Positive – G, Negative – G • Maximum Continuous Current: 150mA • Dimensions: 3.0”H x 1.6” W x 1.6”D (76 x 41 x 41mm) • Weight: .55lb (250g) • Operating Temperature: -40°F – 176°F (-40°C – 80°C) • Housing: ABS • Warranty: Ten Year Limited Warranty One DITEK Center 1720 Starkey Road Largo, FL 33771 DTK-_TPV Video (Twisted Pair) Service Voltage 5V Voltage Clamping 6.8VDC Typical Let-Through Voltage 7.4V Peak Surge Current 120 Amps per pair 1-800-753-2345 Direct: 1-727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com Document: SPS-100063-001 Rev 1 9/07 ©2007 DITEK Corp. Specification Subject to Change