Transcript
DITEK’s DTK-4TPV video surge protector addresses a key vulnerability of Twisted Pair Video CCTV systems – the video wire. Lacking even the minimal amount of protection that a shielded coaxial line has, Twisted Pair Video (TPV) systems are vulnerable to surges entering on the unshielded video wiring, potentially damaging sensitive video equipment. The DTK-4TPV protects against such occurrences. Technical Specifications
Product Features
Service Voltage:
Protects up to four video lines Suitable for use at the camera, converter or DVR
5V
Clamping Voltage:
6.8VDC
Protection Modes:
Positive-G, Negative-G
Surge Current Rating:
Hybrid design provides the best possible protection
120 Amps per pair
Max. Continuous Current:
Single point ground improves protection and speeds installation
150mA 0Hz – 10MHz
Operation Frequency:
<0.5dB – 10MHz
Insertion Loss:
Mechanical Characteristics
Applications
Connection Method:
Twisted Pair Video Circuits
Housing:
Converters
Operating Temperature:
Digital Video Recorders (DVRs)
#26 - #16 AWG ABS -40°F - 176°F (-40°C - 80°C)
Dimensions: Weight:
Accessories
3.0“L x 1.6“W x 1.6“H (76mm x 41mm x 41mm) 0.55 lb (250g)
Quality, Standards & Approval
DIN Rail Mounting Kit – Part Number DTK-DRK
Warranty:
Ten Year Limited Warranty
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com
Doc. Number: SPS-100063-001 Rev 3 02/16 ©2016 DITEK Corp. Page 1 of 1
