Transcript
DITEK’s DTK-4VP DITEK’s DTK-4VP video protector is ideal for 4 camera CCTV installations. Each unit protects four BNC video channels with just 2.8V clamping – the best surge protection in the industry! The DTK-4VP is a cost-effective surge solution for retail or residential CCTV applications
Technical Specifications
Product Features
Service Voltage:
Unique design protects four CCTV video channels with one product Multi-stage, SAD technology, hybrid design provides the best possible protection Reduces downtime and equipment failure due to transient voltage surges from lightning, utility or internal events
1VPP
Clamping Voltage:
2.8VDC
Protection Modes:
Center Pin – Shield, ShieldGround, Center Pin-Ground 291 Amps/Channel (10/1000 µs impulse)
Surge Current Rating:
0Hz – 10MHz
Band Pass Range:
<0.3dB/Channel
Insertion Loss:
24dB RL @ 10MHz
Return Loss:
Applications
75 Ohms
Impedance:
4-Channel DVR Systems Mechanical Characteristics Connection Method:
BNC Female 4 In/4 Out
Housing: Dimensions:
ABS 5.77”L x 2.61”W x 2.14”H (146.56mm x 66.29mm x 54.36mm)
Weight:
8.8oz (250g)
Quality, Standards & Approval Agency Approvals: Warranty:
UL497B Ten Year Limited Warranty
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com
Doc. Number: SPS-10029-002 Rev 6 03/15 ©2015 DITEK Corp. Page 1 of 1
