Transcript
DITEK’s DTK-IBNCHD DITEK’s iBNCHD inline surge protective device is designed to protect externallymounted cameras where a dedicated ground connection is not available. The iBNCHD diverts transient surges through the coaxial shielding, protecting the video feed without introducing ground loops. Solid performance and easy installation make the iBNCHD a favorite of HDCCTV integrators. Install one at the camera and an additional unit at the head end equipment to protect both ends of the video feed.
Product Features
Technical Specifications
Protects externally mounted HDCCTV cameras’ video feeds
Service Voltage: Clamping Voltage:
4.2VDC
Also protects head and equipment
Protection Modes:
Center Pin - Shield
Small footprint makes installation easy
Surge Current Rating:
Fits inside most camera housings
Band Pass Range:
Recommended for applications where AC power is already protected
Insertion Loss:
-1V to 1V
10,000 Amps (8/20 usec impulse)
Impedance:
1.5 GHz Max.
<0.4dB @ 1 GHz 75 Ohms
Mechanical Characteristics
Applications
Connection Method:
HD-SDI, HD-CVI and HD-TVI Cameras
Housing:
AHD Cameras HD-SDI Recorders
Dimensions: Weight:
HD-BNC Female In/Out Aluminum 3.6”L x 1.1” Diameter (91mm x 28mm) 2.5oz (71g)
Quality, Standards & Approval Agency Approvals: Warranty:
UL497B Ten Year Limited Warranty
Every precaution has been taken to ensure that this literature is accurate and complete. DITEK Corporation assumes no responsibility and disclaims all liability for damages resulting from the use of this information or for any errors or omissions.
One DITEK Center 1720 Starkey Road - Largo, FL 33771 Phone: 1-800-753-2345 Direct: 727-812-5000 Technical Support: 1-888-472-6100 www.ditekcorp.com
Doc. Number: SPS-100078-001 Rev 3 02/15 ©2015 DITEK Corp. Page 1 of 1
