Transcript
Diver hot water machine
Ordering information Diver hot water machine, 400 V, 50 Hz Diver hot water machine, 400 V, 60 Hz Diver hot water machine, 440 V, 60 Hz Diver hot water machine, 440 V, 50 Hz
1.90.00003 1.90.00004 1.90.00007 1.90.00009
The Diver Hot Water Machine consists of two main parts: the pump unit and the heater unit. The pump unit and heater unit are controlled via the control panel on the unit. The heater unit can supply hot water for three divers wearing hot water suits. If there is no waterflow, the pump and heater will be switched off to avoid damage to the pump and heater unit. The unit has five heating element groups. One group is switched automatically. The other four groups are controlled by switches. The pre-set outlet water temperature is 38°C. The temperature is displayed on the control panel. Simple temperature control, and limit value monitoring.
V-J
The required pump water supply is +1.0 - +4.0 bar, 0 - 50 litres/ min. A total of four displays are used in the Hot Water Machine. Only three are visible on the frontpanel. • Maximum thermostat Jumo Ecotron (not visible on frontpanel) • Pump Pressure read-out, 0-40 bar • Water Flow, 0-48 liters/min • Water Temperature, in °C
Specifications Power supply Frequency
3x 400 VAC or 3 x 440 VAC, 150 A 50 Hz or 60 Hz
Upper heat unit Power consumption 96 kW Insulaltion class IP65 Weight 200 kg Dimensions (HxWxD) 1084 x 750 x 700 mm Lower pump unit Weight 300 kg Dimensions (HxWxD) 700 x 750 x 700 mm Pump Weight 24 kg Dimensions (HxWxD) 438 x 330 x 188 mm Inlet Pressure Range: Flooded to 4.9 bar Flow 15.6 gpm (59 l/m) Pressure Range 100 to 1500 psi (7 to 105 bar) RPM 1450 rpm Inlet Pressure Range Flooded to 70 psi (Flooded to 4.9 bar)
All rights reserved. Reproduction in any form or by any means is not allowed, without prior permission in writing from IHC Hytech BV
Pump (stainless steel) Superior design triplex plunger design provides smoother liquid flow. Hi-pressure seals are completely lubricated and cooled by the liquid being pumped. Inlet and discharge valve assemblies.
IHC Hytech BV Ramgatseweg 27, 4941 VN, Raamsdonksveer The Netherlands T +31 162 52 22 02
[email protected] www.royalihc.com www.ihchytech.com
