Transcript
DJI Phantom 3,Phantom 4 Intelligent Battery Charging Dock 15A Adaptor Plug Indicator
Status Indicator
Original Adaptor Port Indicator Phantom 3 Original Charger Port
Remote Controller Charge Port
15A Adaptor Plug
Battery 3 Port
Battery 2 Port
Phantom 4 Original Charger Port
Basic Datas
Battery 1 Port
T-01
T-02
1) Using the 15A Adaptor
Voltage: 17.4V (The power source voltage can not pass 17.5V or it will be destoryed and the user assume liability for damage from improper use of this product) Max Current:15A (The current must't pass 15A or the board would be overheated and the user assume liability for damage from improper use of this product )
2)Using the Original Adaptor
Phantom 3 battery's default Voltage:17.4V , Max Current:5.7A Phantom 4 battery's defailt Voltage:17.5V, Max Current:5.7A
DJI Phantom 3,Phantom 4 Intelligent Battery Charging Dock Functions 1)The Charger Dock can support to charging 3 batteries and 1 remote controller battery at the same time(As the T-02 Showed);
2)The Charger Dock got the indicators to show the voltages of each battery and the remote controller's ,it's convenient for us to check the charging status; The indicator showed different as the connect changes:
1)If the power source connecting with the 15A Adaptor,the indicator will show the voltages of the battery's and the remote controller's alternately; The charger dock will go into the sleep mode under these two conditions: There will be no batteries insert into the charger dock over 2 mins; All of the batteries(with remote controller's battery included) were full charged. The indicator of the 15A Charger adapter will be on
Output
Two indicators will flash alternately Voltage
Sleep Mode
Using the 15A Charger Adaptor for charging
2)If the charger dock connecting with the original adpater,the indicator will show you the voltage of the first battery slot,then it will switch automatically to show the second battery slot's if the first battery has been full charged or no battery insert into the first battery slot in 2 mins,the third and the forth battery slots will got the similar situation as the first and the second ones.The battery dock will goes into the sleep mode after the charging done and the indicator showed OFF,two indicators flash alternately.You need to reset if you want to charge the batteries again The indicator of the 15A Charger adapter will be on
Output
Two indicators will flash alternately Voltage
Sleep Mode Remote Controller
Using the original battery charge adapter
User Manual Attentions
Battery 1
Battery 2
Battery 3
Please connecting the battery with the power source firstly,the charger dock will cut off automatically after the batteries be full charged.If you connect the batteries which were drained,you need to reset the battery dock and reconnect,then insert the drained batteries and start the new charging process. Phantom 3 Original Charger Port,Phantom 4 Original Charger Port,15A Charger Adapter Port can't be used at the same time,you can just use one Port as the Output connector.Such as ,you can't use Phantom 3's charger port or the 15A Charger Adapter Port when you are using Phantom 4's charger Port as the output connector.
Please using the matching cable which included in the pack to connect the Charger Dock
Packing List: Battery Charging Dockx1 Charging Cablex3 Remote controller charging Cablex1 User Manualx1