Transcript
Product
Boot
Protection
IP68
DKK Group
DK-JB10 SERIES This product is used for the sealing the joint part of connectors.
Model Name General Specifications APPlications
DK-JB10D
DK-JB10M
Provides additional moisture seal for cable connections
APPlications per Kit
One 1/2 in to antenna or device connection (7/16 DIN male)
Color Material Type Package Quantity
One 1/2 in to antenna or device connection (4.3-10 male)
Black Silicone Rubber 1
Dimensions Cable Diameter for Seal maximum
16.26 mm (0.64 in)
16.26 mm (0.64 in)
Cable Diameter for Seal minimum
15.59 mm (0.61 in)
15.59 mm (0.61 in)
Inner Diameter
14.00 mm (0.55 in)
14.00 mm (0.55 in)
Boot Length
95.00 mm (3.74 in)
95.00 mm (3.74 in)
Boot Outer Diameter
48.00 mm (1.89 in)
35.50 mm (1.40 in)
Mechanical Specifications Installation Temperature Operating Temperature Storace Temperature UV Resistance Test Method
UV Resistance, Minimum with no degradation INGRESS PROTECTION
-40 ºC to +65 ºC ( -40 ºF to +149 ºF ) -40 ºC to +85 ºC ( -40 ºF to +185 ºF ) -55 ºC to +85 ºC ( -67 ºF to +185 ºF ) ASTM G154-12a ≧ 1000 hours IEC 60068-2-11 / IEC 60529:2001, IP68
DK-JB10D
All specifications are subject to change without notice. GKE-91055 1/2
DK-JB10M
Oct-16
Product
Boot
Protection
IP68
DKK Group
Weather boot installation instruction
1 2
Install the weather proof boot on the cable, 200-300mm from the end face of the connector
The cable assembly with the other end of the docking, use the appropriate wrench locking Connector tighten torque 7/16 DIN : 25-30 N・m 4.3-10 : 5 N･m
3
Install the weather proof boot on the cable, 200-300mm from the end face of the connector
4
Install the weather proof boot on the cable, 200-300mm from the end face of the connector
5
All specifications are subject to change without notice. GKE-91055 2/2
Install the weather proof boot on the cable, 200-300mm from the end face of the connector
Oct-16
