Dk850baf01aa Owner’s Manual

Transcript

DK850BAF01AA OWNER’S MANUAL Index ‹ Pre Installation Tips / Selecting Where Your Bike Goes …………………………………… 02 ‹ Important Safety Instructions ……………………………………………………………… 03 ‹ Specifications ………………………………………………………………………............ 05 ‹ Assembly Parts ……………………………………………………...……………………….06 ‹ Parts Details ………………………………………………………………………………… 07 ‹ Assembly Procedures ………………………………………………………………………. 08 ‹ Operation Instruction ……………………………………………………………………….. 14 1 2012/3/2Ver1.1+V1.0 Pre Installation Tips The following are tips to aid you in the installation of the 850B Fitness Bike: 1. Prepare all relevant parts before starting, this will save you time! 2. All screws are tightened by turning to the right and loosened to the left. 3. All tools needed for complete installation are provided. 4. Having another person to help will make it easier. 5. All instructions are written as if the user is positioned on the bike facing the computer. Selecting Where Your Bike Goes Positioning - The ideal place to use your bike is on solid and even ground. - There should be at least a 45cm gap either side and behind for ease of getting on and off. - Make sure a power socket is a suitable distance away. - Try and put your bike in a room that is used often, keeping it in sight will keep you using it! Moving Your Bike - The 850B Fitness Bike is very heavy, so please ensure two people are available to move it. - DO NOT grasp the bike by the computer. -Only wheel the bike when indoors and on a flat surface. When used outdoors on concrete or gravel the wheels may chip or buckle. 2 2012/3/2Ver1.1+V1.0 Important Safety Instructions When using this product, basic precautions should always be followed, including the following: Please read the instruction carefully before starting to use this product. Danger – To reduce the risk of electric shock： Always unplug this product from the electrical outlet immediately after using and before cleaning the treadmill. Warning – To reduce the risk of burns, fire, electric shock, or physical injury： 1. The product should never be left unattended while plugged in. 2. When using the treadmill, please step on the treadmill before start. Do not start the treadmill and then step on the equipment. Unplug the product from the outlet when not in use or before putting on or taking off the clothes and other belongings. 3. To avoid any danger, close supervision is necessary when this production is used by children, invalids or disabled persons. So it is when the machine is working with such persons around. 4. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. 5. Not proper or excessive training may be harmful to your health. 6. Be sure to use the product only for its intended use as described in this manual. Do not use any attachment not recommended by the manufacturer in order to avoid any danger or accidents 7. Never operate the product if it has a damaged cord or plug, if it is not working properly, if it has been damaged, or dropped into water. Please return the product to the service center of seller for examination and repair. 8. Do not carry this product by the supply cord or use the cord as a handle. 3 2012/3/2Ver1.1+V1.0 9. Keep the cord away from hot surfaces or ground. 10. Never operate the product with the air vents blocked. Keep the air vents free of lint, hair, etc. 11. Never drop or insert any objects into any vent of the treadmill. 12. Do not use or operate outdoors. 13. Place the treadmill on flat ground or flat roof. 14. Please confirm 100cm space away behind the bike or equipment. 15. Do not operate where aerosol (spray) products are being used or where oxygen is thin. 16. Before turning the product power off, turn all controls to the off position then remove the plug from the outlet 17. Connect the product to a properly grounded outlet only. 18. If the machine has folding mechanism, user should descend the incline to original position after workout. 19. The max weight of user is 180 kg. 20. The appliance is intended for commercial use only. 21. The safety level of the equipment can be maintained only if it is examined regularly for damage and wear. 22. The baking system is speed-dependent in watt control mode and speed-independent for other modes. 23. Place Customer Service Address (one of Manufacturer, Importer, Agent). EX. No. 1, LANE 160, SEC. 2, TANFU-ROAD, TAN TZU HSIANG, TAICHUNG, TAIWAN, R.O.C. 4 2012/3/2Ver1.1+V1.0 Specifications Max. User Weight 400 lbs/180 kg Size of Machine 64 cm x 132 cm x 146 cm Packing Weight of Machine 62.2kg Net Weight of Machine 52.2kg Power Supply 15V/1A DC (Charger) Note: Charge your battery once per week 5 2012/3/2Ver1.1+V1.0 Assembly Parts 6 2012/3/2Ver1.1+V1.0 Parts Details ITEM Description Qty a b c d e f g h i Steel hexagon socket head screw M8xP1.25x25 Blue Nylok Spring washer M8 Flat washer Ø8x Ø16x2.0t Inner steel hexagon socket head screw M8XP1.25X20 Blue Nylok Spring washer M8 Umbrella-head cross screw blue nylok M4xP0.7x10 Spring washer M4 Round-head cross screw M5x15 Allen wrench 6mmx40x120 <120 crossing for longer part> 4 4 4 4 4 4 4 3 1 7 2012/3/2Ver1.1+V1.0 Assembly Procedures STEP 1. Attaching the Seat to the Main Frame of the bike 1. After must first loads POPIN(H), then seat cushion (D) depends on the arrow direction insertion frame group (C) localization then. 8 2012/3/2Ver1.1+V1.0 STEP 2. Attaching the Upper Control Frame to the Main Frame 1. Thread the wire from the Bike Frame (B) to the Upper Control Frame (C), then place the two frames together. Insert steel hexagon socket head screws (a), spring washers (b) and flat washers (c) according to the figures and tighten. 9 2012/3/2Ver1.1+V1.0 STEP 3. Attaching the Handlebars 1. Thread the 3 wires in the Handles (E) through the exit of the bend pipe on the Control Frame. Then fix the handlebars by tightening with the CKS Hex Screws (d) and Spring Washers (e) according to the drawing below. Caution: ‹ When assembling the handles and upper control frame, kneeling down may be needed. Please take care when standing back up to avoid hitting your head or causing other injury. 10 2012/3/2Ver1.1+V1.0 STEP 4. 1. Wire connection of control pipe system Pull out the wires in the tube of the Upper Control Frame (B) according to the drawing below. 11 2012/3/2Ver1.1+V1.0 STEP 5. Attaching the Computer 1. Connect the Computer (A) with the wires from the Upper Control Frame (B). Fix using Blue Nylok Screws (f) and M4 Spring Washers (g). Make sure the screws have been tightened well to avoid any loosening or possible damage to the computer. Caution: ‹When assembling the Computer, kneeling down may be needed. Please take care when standing back up to avoid hitting your head or causing other injury. ‹Make sure the bike is not plugged in when attaching the Computer to avoid a possible electric shock. ‹When attaching the wires make sure they are connected securely and not wound around each other or tangled in any way. This will avoid possible short circuiting. ‹No less than 2 persons are needed for assembly. One should hold the Computer in place while the other connects the wires and tightens the screws. 12 2012/3/2Ver1.1+V1.0 STEP 6. Attaching the Decoration Covers to the Bike Frame 1. Finally, fasten the left and right decoration covers (G and F) with Round Head Philips Screws (h) according to the drawing below. 13 2012/3/2Ver1.1+V1.0 Computer Operation Instructions I. Subject Instruction This computer is 7”with TFT-LCD window which can display SPEED、LEVEL、DISTANCE、 CAL、TIME、WATTS、BPM、RPM and PROGRAM figure. II. Display and booting of the starting-up window goals mode：Target TIME, DISTANCE and CALORIE exercise mode. race mode: User can compete with computer according to the distance and time he wants. fitness test mode：6 minutes of self-movement model of physical fitness (heartbeat health evaluating) HRC mode：Heartbeat exercise mode which has levels of 65%, 75%, 85% and THR. Set the exercise levels in accordance with the coach or requirements of self-direction. programs mode：There are exercise program, stable exercise program and six 14 2012/3/2Ver1.1+V1.0 different kind of program to choose. user mode: User can set up the intensity of each level freely, total are 32 levels. III. Key Functions(Any effectively key should create one sound) 1. QUICK START：Press this key to start the machine directly and account numbers of all kinds of function 2. STOP：Press this key to stop the counting of each program Under this data setting status, press this KEY to return the standby mode. 3. PAUSE：Press PAUSE key to pause the program and all the windows will stop counting. Press this key again to start. 4. MODE：Under start/ready status, press this key to switch Profile. Press this key to change playground or project figure while running. Zoom in or zoom out the menu under video mode(TV model). 5. ENTER：Enter into options or touch this key for confirmation. 6. CLEAR：When entering program control mode to set parameters, touch this key to get back the default value and return to the first parameter or item. (one press will return one level) 7. LEVEL ↑: Press this key to increase level and the values set up while running. 8. LEVEL ↓: Press this key to decrease level and the values set up while running. 9. FAN：After the motor starts, press this key to boot up the fan and in the running of the fan, press this key to stop. 10. NUMBER KEY * 10 Key：(1,2,3,~0) Press this key to input instant value under data setting status. While setting parameters, this key is number instant key. Setting range is integral value. It has single code input and double code combination input. Take 21 years old for example, Press ”2”and release it first, and then press”1”(determinant time is within 1 second). 15 2012/3/2Ver1.1+V1.0 IV. Mode Instructions 1. 2. 3. 4. 5. For the treadmill is dynamo type, it need 25PRM above or 15VDC/1000ma transformer to start the computer continuously. When the treadmill not plug to the transformer, the computer will be totally powered by dynamo. While the rotate speed is lower than 40RPM, the computer will be powered by batteries. If not operated for 30 seconds, it will enter into electric save mode(the screen will shut down). When stepping(40RPM↑), the electric power will save automatically. While the rotate speed is lower than 40RPM, it will display ”RPM↑”icon. When ”RPM↑”display for 15 seconds, it will enter into PAUSE MODE and back to start/ready menu after 45 seconds Under electric save mode or PAUSE mode, when the rotate speed is higher than 60RPM, it will resume to start/ready menu. 6. key, it will enter Under Start/Ready mode or program control mode, if press into start-up of Manual run directly.(Parameters adopt the default value) 7. Under Start/Ready status, you can press key to choose Goal mode, Programs mode, Fitness Test Mode, HRC mode, USER mode or RACE mode in center window. The selected item will show by blue frame. 8. Program mode：After choosing PROGRAM, adjust parameter, or press directly to start. 9. If the value is above 0, it will be executed by countdown. When the value returns to zero, the program is over. On the contrary, if the value is 0, it will be executed by count up. 10. PROGRAM has 32 levels in all. The setting time will be executed averagely by 32 levels. 11. While setting any parameter, you can press to cancel the setting and back to the first parameter or program control menu. All the parameters will get back to the default value. 12. There are character strings to instruct the user how to operate under mode edit menu or parameter setting menu. 13. While running, the center menu goes contrarotate like along playground. On the bottom left corner will display the number of circles(LAPS) .Every circle is 0.4KM 16 2012/3/2Ver1.1+V1.0 (0.25MIL).You can switch it to project mode by pressing key. 14. After the program is over or under pause mode for 30 seconds, the buzzer will beep for 5 sound and then the accumulate sport values will display in the center window and after 20 seconds or press key, it will back to start/ready menu. 17 2012/3/2Ver1.1+V1.0 V. General Operation and Instructions： 1. Under start/ready status, press key, it will enter into MANUAL mode and after 3 seconds countdown, the treadmill will start running. 2. MANUAL mode has total 20 levels for your choice as you prefer. 3. There are 6 main program controls for choose under start/ready menu 4. User can press key to choose the desired LEVEL(According to the rotate speed, the same LEVEL has different resistance feedback) z Goal Mode Time Goal：Set the time goal required if running in the destination area and when the goal is reached, the program will stop automatically. Distance Goal：This program serves to test the endurance of the user. When the user completes the set miles within limited time and reaches the goal, the program will stop operation automatically. Calories Goal：This program serves to lose and control weight. When certain quantity of the calories is exhausted within limited time, the program will stop operation automatically. 1. Press key to select this mode and press key into the target value setting: Press number instant key or to adjust WEIGHT(Preset value: 70kg; Range is 23-180kg ), TIME(Preset value: 20 min; Range: 0, 10-99min) or DISTANCE(Preset value: 5KM; Range: 0-99KM) or CALORIES(Preset value: 500Kcal; Range: 0-999 Kcal). 1. After setting the parameters or while setting parameters, press or key to execute the program(The unset value will adopt the default value). The target parameter is executed by countdown. 3. If you want to change the parameters, press reset or press key to back to the first item to key to directly back to the start/ready status. 18 2012/3/2Ver1.1+V1.0 4. User can press key to choose the desired LEVEL(According to the rotate speed, the same LEVEL has different resistance feedback) z Fitness Test Mode(Physical fitness training) 1. Press setting: key to select this mode and press key into the target value Press number instant key or to adjust WEIGHT(Preset value: 70kg; Range is 23-180kg ), AGE(Preset value:30; Range: 10-90) and SEX(Preset is male; male or female) 2. After setting the parameters or while setting parameters, press or key to execute the program(The unset value will adopt the default value). The target parameter is executed by countdown.(Program will calculate the criteria according to the editing value). 3. If you want to change the parameters, press key to back to the first item to reset or press key to directly back to the start/ready status. 4. Execute time is 6 minutes and every level time is 6 minutes divide 32 levels. It is executed by countdown. 5. Male preset value: 150 Watts; Female preset value: 100 Watts. The value will increase to the default value from 45Watts after starting the program key to choose the desired LEVEL(According to the rotate 6. User can press speed, the same LEVEL has different resistance feedback) 7. After finished the program, it will enter into YOUR FITNESS TEST RESULT menu automatically. FITNESS LEVEL window will display 1~5 number, 1 represents the worst test result and 5 represents the best result. 8. FITNESS TEST mode comparison table： If Distance is 0, the result number will be 0. MALE AGE HEART RATE <35 >=186 >=170 >=139 >=129 <129 <45 >=183 >=165 >=124 >=112 <112 <55 >=186 >=167 >=127 >=100 <100 >=55 >=188 >=165 >=129 >=107 <107 RESULT 1 2 3 4 5 19 2012/3/2Ver1.1+V1.0 FEMALE AGE HEART RATE <35 >=197 >=181 >=150 >=140 <140 <45 >=212 >=197 >=161 >=150 <150 <55 >=228 >=212 >=181 >=169 <169 >=55 >=238 >=223 >=197 >=181 <181 RESULT 1 2 3 4 5 z HRC Mode(need to wear wireless chest belt) The purpose of this program is self-training based on heart rate. During the training, when heart rate of runner achieves the setting number that you make, the LEVEL value will keep within a certain range for best training effort. 1. The whole heartbeat control program has total four target pulse 65%, 75%, 85%, THR (Target Heart Rate). Calculate formula of heartbeat setting=(220-AGE)* heartbeat program control value For example, age is 40，if the target pulse is 80% of maximum pulse, then the heartbeat times:(220—40)×85%=153 2. Press key to select this mode and press special target heart rate. After selected, press Press number instant key or key to select key to set target value: to adjust WEIGHT, AGE and TIME parameters. 3. If you want to change the parameters, press press key to enter. Press key to back to the first item to reset or key to directly back to the start/ready status. 4. After setting the parameters or while setting parameters, press or key to execute the program(The unset value will adopt the default value). The target parameter is executed by countdown. 5. Under THR mode, the target heartbeat value will automatically calculate according to the input age of users. 6. When no heartbeat value is detected, window will display NO PULSE. If no pulse is detected in 45 seconds, it will back to start/ready mode. 7. During workout, RPM should within 70RPM~80RPM. If RPM is lower than 70RPM, the window will display”RPM↑”to remind. If RPM is higher than 80RPM, the window will 20 2012/3/2Ver1.1+V1.0 display ”RPM↓”to remind. 8. HR CONTROL Mode： Preset heartbeat control mode is 50W(Level2). When computer detects the pulse, the heartbeat value will be judged every 10 seconds. Judgment method of Heartbeat value as follows: A. While running, program will compare actual heartbeat value with preset heartbeat value. If actual heartbeat value ≦preset heartbeat value 15, WATT will increase 20 automatically, the highest can reach 400 WATT. B. While running, program will compare actual heartbeat value with preset heartbeat value. If actual heartbeat value ≦preset heartbeat value 5, WATT will increase 10 automatically, the highest can reach 400 WATT. C. While running, program will compare actual heartbeat value with preset heartbeat value. If actual heartbeat value ≧preset heartbeat value 5, WATT will decrease 10 automatically, the lowest can reach 50WATT. D. While running, program will compare actual heartbeat value with preset heartbeat value. If actual heartbeat value ≧preset heartbeat value 15, WATT will decrease 20 automatically, the lowest can reach 50WATT 9. While running, program will compare actual heartbeat value with preset heartbeat value. If actual heartbeat value ≧preset heartbeat value 30, WATT will decrease down to 50WATT. The program will not carry out until actual heartbeat value ≦preset heartbeat value 5. 10. This chart is about Age and Pulse Value (default value) for THR Function Age 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 H 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 181 BPM preset 126 125 125 124 124 123 122 122 121 121 120 119 119 118 118 117 116 116 115 115 114 L 126 125 125 124 124 123 122 122 121 121 120 119 119 118 118 117 116 116 115 115 114 Age 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 H 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 162 161 BPM preset 113 113 112 112 111 110 110 109 109 108 107 107 106 106 105 104 104 103 103 102 101 21 L 113 113 112 112 111 110 110 109 109 108 107 107 106 106 105 104 104 103 103 102 101 Age 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 H 160 159 158 157 156 155 154 153 152 151 150 149 148 147 146 145 144 143 143 142 141 BPM preset 101 100 100 99 98 98 97 97 96 95 95 94 94 93 92 92 91 91 90 90 90 L 101 100 100 99 98 98 97 97 96 95 95 94 94 93 92 92 91 91 90 89 89 Age 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 H 140 139 138 137 136 135 134 133 132 131 130 129 128 127 126 125 124 124 BPM preset 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 L 88 88 87 86 86 85 85 84 83 83 82 82 81 80 80 79 79 78 2012/3/2Ver1.1+V1.0 z User Mode 1. This mode will record the last state user entered. Press mode and press key to select this key to enter. You can press MODE key again to adjust the resistance from 1 to 32 level (press to adjust from L1-L20) .The corresponding light will flash during setting this level, then press 2. 3. to confirm and into next level setting. After finish setting 32 levels, press key to set time. Setting time：(default value: 10 minutes；range: 0，10-60MIN). Time of each level is the editing time divided 32 levels. After setting the target time value or while setting parameters, press or key to execute the program(The unset resistance will adopt the default value: LEVEL1 or the last LEVEL). Time is executed by countdown. 4. If you want to change the parameters, press reset or press 5. key to back to the first item to key to directly back to the start/ready status. key to choose the desired LEVEL(According to the rotate User can press speed, the same LEVEL has different resistance feedback) z Race Mode 1. Press key to select this mode and press key into the target value setting: It will ask user to set target distance(0.1、0.4、1.0、2.0、5.0、10.0 kilometers/miles) and challenge time of target distance. Press to adjust. At the time, program will compute Pacer speed according to the editing value. Computer Speed(Pacer Speed)=Target Distance/Target Time. Unit is KM/HR(ML/HR) 2. 3. 4. 5. Make sure the pacer speed is correct. Press to start race. After showing3,2,1 on screen, user starts race with computer. If the input value is invalid, user should adjust it again, otherwise, this mode can’t be started. Blue point represents user and red point represents computer in the playground. In the bottom right corner of playground, it will show the distance that the computer is ahead or behind user. User should reduce the his own resistance to catch up with or overrun the computer(red bike image ). When one of the players reaches the target distance, the program is over and the 22 2012/3/2Ver1.1+V1.0 computer will show the value. z Program Mode 1. Press key to select this mode and press key to enter. Press key again to select special program: User can select Rolling、Fat burn、Aerobic、Hill run、Hill climb and Hill intervals total 6 automatic Program mode. key and user can press 2. After selected the program control, press adjust the LEVEL. Total 10 levels of difficulty. key to 3. After selected LEVEL, press , at this time user can press key to adjust WEIGHT(Default value:70KG, Range: 23-180KG) and TIME(Default value: 10 MIN, Range: 0，10-99MIN) 4. If you want to cancel the last parameter, press reset or press key to get back to the first item to key to go back to the start/ready menu. 5. After setting the target time value or while setting the above parameters, press or key to execute the program(The unset resistance will adopt the default value: LEVEL1 or the last LEVEL). Time is executed by countdown. 6. During workout, user can keep on using are 8 levels. 23 to increase WORKOUT LEVEL. Total 2012/3/2Ver1.1+V1.0 ◎Program Control Project Figure level 24 2012/3/2Ver1.1+V1.0 25 2012/3/2Ver1.1+V1.0 26 2012/3/2Ver1.1+V1.0 27 2012/3/2Ver1.1+V1.0 28 2012/3/2Ver1.1+V1.0 29 2012/3/2Ver1.1+V1.0 30 2012/3/2Ver1.1+V1.0 31 2012/3/2Ver1.1+V1.0 32 2012/3/2Ver1.1+V1.0 33 2012/3/2Ver1.1+V1.0 34 2012/3/2Ver1.1+V1.0 35 2012/3/2Ver1.1+V1.0