Transcript
N
D L1000 LOA D E R’\\N For 12 to 22 Horsepower Tractors
kr QUICK-DETACHABLE 4 VERSATILE 4 POWER PACKED
SPECIFICATIONS 84” 64’
Maximum Lift Height Clearance Dumped Reach Bucket on Ground Digging Depth Overall Height Carry Position Roll Back Bucket 15° Reach Maximum Maximum Bucket Tilt at Full Height
A B C D E F G H
52 1/2” 5” 47” 4” 24” 40”
-
-
-
Note: Measurements and performance data shownwill vary slightly with different tractor models, tire sizes, and variations in hydraulic systems involved.
PERFORMANCE FEATURES Responsive Operation with 2” Double-Acting Lift Cylinders and a single 2” Double-Acting Bucket Cylinder Dumps Faster than most twin bucket cylinder loaders. -
1,400 lbs. 900 lbs.
Break-A-Way Full Height
Note: Based on 2O00 PSI Pressure Relief Cross Control Valve. All weights are electronically scaled. 48” Material Bucket 5.8 cu ft. 60” Material Bucket 7.2 cu ft. High Clearance Low Profile Design Wrap-Around Side Frames and Front Bumper Protection. Strong Loader Main Frame Built for Optimum Loader Capacity and Durability. —
Approximate Shipping Weight 640 lbs. (with 60’ Material Bucket, Valve Kit, and Mounting Kit.) Kelley Manufacturing Corporation 61501 Bremen Highway Mishawaka, IN 46544-9724 (219) 255-4746 Fax: (219) 255-6817
Parking Stand Provided for Easy Dismounting Hydraulic Oil Couplers Conveniently Located at Control Valve Work Ports. Optional Single Lever Valve Control Compatible with many mid-mounted mowers.
SOLD BY:
U FEMA
__
t
tmcien
by
ana
oie
rroraa
Design
E’
(
\í)
Features
[ The Kelley BiD Backhoe in transport mode with boom lock in place.
e master Six-spool sectional control valve with adjustabl for circuit boom on feature relief valve. Safety unload ing feather valve Good ion. operator protect characteristics for superb operational control. le Power beyond capability for control valve availab as an optional kit. lever hydraulic control for ease of operation. Two 6’6” with A Maximum digging depth Six powerful double-acting hydraulic cylinders 60” Digging depth (two foot flat bottom) l seals interna quality high chrome plated rod shafts and 9’O” B Reach from swing pivot ance. perform life for dependable long 5,3’, lock. C Transport height oe is equipped with a safety transportation boom Backh 5’O” good D Bucket Clearance for. legs Wide stance hydraulic foldout stabilizer 165° E Bucket Rotation operating control. 140° nal F Swing Arc r shock absorbing swing stops for swing rotatio Rubbe 7’O” G Stabilizer spread down (Operating) protection. 5’8” H Stabilizer spread up (Transport) tubular and box design for the frame, boom, and Sturdy lbs. 4076 of excess in Bucket Pryout power dipper stick assemblies. 1870 lbs. Bucket curl power at cutting lip have abrasive-resistant coverings for longer life. Hoses lbs. 1728 Crowd power at end of dipper stick with oil and Basic backhoe unit is assembled, inspected, filled 640 lbs. Lift at end of boom operated before shipping. Lift at and of stick 2/ boom & dipper are locked in place for maximum wear protection, pins All lbs. 375 stick extended bushings and fitted for grease with replaceable steel wear 2000 RS.l. Hydraulic system relief valve setting at major pivot points. 3.5 to 4 G.RM. er Hydraulic flow requirements for the farmer, rancher, estate owner or homeown Ideal 555 lbs. This Shipping weight (less bucket) ties. proper their of nance mainte to use in the care & 12 to 35 HP at Recommended Tractor size backhoe is compact & great for those hard to get 14” troke 2.5”/S Bore Boom cylinder damage. surface locations with the least amount of ground Bore 2.5”/Stroke 10” Dipper stick cylinder Bore 2.5”IStróke 14” Bucket cylinder Kelley Manufacturing Corp. Bore 2.5”/Stroke 7” Swing cylinder 8” troke 2.0/S 61501 Bremen Highway Bore Stabilizer cylinders (two) Mishawaka, IN 46544-9724 Struck Heaped Bucket Cutting Number of Weight (219) 255-4746 Capacity Capacity Teeth Width Width 33 lbs. .64 cu. ft. .47 Cu. ft. 3 9-1/2” 9” 38 lbs. .85 cu. ft. .63 Cu. ft. 3 12-1/2” YOUR LOCAL AUTHORIZED KELLEY DEALER IS: 12” ft. Cu. .79 ft. Cu. 44 lbs. 1.06 4 15-112” 15”
Specifications
-
and are based on boom pivot 11” above Specifications may va,y depending on tractor model for stability & safe tractor operation. needed be s may r weight counte r front ground/eve!. Tracto Printed in U.S.A. notification. t withou to change t s subjec are Specification
I
-
—.
ft
MODEL 672 FRONT LOADER
QUICK-ATTACH FRONT LOADER
I REFERENCE
QUANTITY
PART NUMBER
PART DESCRIPTION
1 1 4
501100 501200 501225
Loader Bucket Loader Arms Assembly Loader Pin
6
2
501336 5017HA
8
1 2 2 1 I 1
2 3
.
.±9___ 11 12 13
..
[
15 16 17 19
2 22
2 3 1
F
i
4 2 ±_
.
26
8
27 28 29
5 1
Boom Cylinders uc1ce çylindçr . 5017HC Control Valve 50171-ID 3/8 NPT Qick Disconnect Socket 1 50171-IE 3/8 NPT Quick Disconnect Plug 50171-IH 4M3K-4MP-4FJICX45-33” Hose 5017HJ 4M3K-4MP-4FJICX45-31” Hose 5017HK 4M3K-4MP-4FJICX45-34” Hose 4M3K-4MP-4F11CX45-32” Hose 50171-IM 4M3K-4MP-6vWX90-24” Hose 50171-IN 4M3K-4MP-6MPX9O-21” Hose 5017HP 4M3K-4MP-6MPX9O-28” Hose 5017HQ 6M3K-6MP-6MPX9O-62” Hose 5017HS 6M3K-6MP-6MP-50” Hose 5017HG 6M3K-6MP-6MP-60” Hose 725HE MP 6FiX20 Adapter 5017KE 6MB-4MJIC Adapter 1 745HE ¼” Street Tee 6MB-6FPXAdapter 9±_ 747HA 6MB -6FPX 5017TA ¼” Female NPT x3/8” Tube Compression Nut 5017TC_______ Twin Tube Clamp IH Y4.!i2.JP 5017HV Danfoss Joystick (Not shown)
0 C)
(V
i
Li]]
-
NOO’2
__________]zzzz
D 1t
QUICK-ATTACH FRONT LOADER 74 SERIES MOUNTING ASSEMBLY IEFERENCE A I 2 3
—.---
PART NUMUER PART DSCRWUON
QUANTITY I 1 1
574118 574123 . 574124
.
!. Front Loader Mount -—
-——--.-:—-—-————
Left Rear Loader Mount Right Rear Loader Mount
/ Ca)
0
