Transcript
Date: ______________________________ Type: __________________________ Firm Name: _______________________________________________________ Project: __________________________________________________________
DLE C-101
High-brightness RGB digital light engine for lighting products DLE C-101 is a complete, networkable illumination module intended for integration into a wide variety of lighting products and custom installations. Possible applications include spot and wall wash lighting. •
(Shown without LEDs) Ø5.75 in 146 mm
Compact design — The light engine is a circular module and measures approximately 6 in (152 mm) in diameter.
•
Over 16 million colors — Three 8-bit LED channels (red, green, and blue) provide a full 24-bit control of emitted color, for a total of 16.7 million colors. Color changes happen smoothly and are virtually instantaneous.
•
Accepts DMX or Ethernet controller input — When paired with the appropriate power / data module or power / data supply, the digital light engine accepts DMX or Ethernet controller data. This enables scalable control for both small and large sets of LEDs, for lighting plans and light shows.
•
Each module is individually addressable — digital light engines are given unique serial numbers at the time of manufacture. Serial numbers distinguish each DLE C-101 from other modules, lights and fixtures on your network.
•
Effective heat dissipation — Aluminum-core printed circuit board (PCB) construction ensures highly efficient heat dissipation and thermal performance. An over temperature protection circuit operates when component temperature exceeds acceptable limits. These features help ensure a high level of performance and longevity from the LED sources.
1.1 in 28 mm
1.9 in 48 mm
Ø0.15 in 4 mm TYP
1 in 25 mm
R 2.2 in 56 mm R 2.06 in 52 mm
Alignment holes
1.8 in 46 mm 4.98 in 1.1 in 126 mm 28 mm
1.8 in 46 mm
1 in 25 mm
1.9 in 48 mm
(Shown with LEDs) 0.07 in 1.8 mm 0.63 in 16 mm
•
Unrivalled expertise — DLE C-101 is supported by Philips Color Kinetics comprehensive technical and sales support, allowing OEM partners to benefit from Philips Color Kinetics years of experience as an LED technology design leader. Philips Color Kinetics is available for design assistance, pre-installation planning, technical support and training.
Specifications
Due to continuous improvements and innovations, specifications may change without notice. Item
Output
Electrical
Control
Physical
Specification
Details
Lumens
~500*
Beam Angle
10°, 28°, or 120°
LED Channels
Red / Green / Blue
Color Range
16.7 million (24-bit) additive red, green, and blue colors; continuously variable intensity output range
Input Voltage
24VDC Regulated, +/- 0.5
Power Consumption
25W Max. at full intensity (full RGB)
Maximum Input Current
50 mA (minimum) / 1.10 A (maximum)
Control System
Philips full range of controllers, or a third-party DMX controller
Dimensions
5 in (127 mm) diameter, .7 in (18 mm) thickness
Connectors
Quick Connect Terminal for data, power, and ground
Compatible Mating Connector
Molex P/N: 0357180910
C-101 PDM-101 +24V Data COM
+ -
DMX Input 24VDC Power Supply
+ -
Typical Installation Using Color Kinetics PDM-101 Power / Data Module Single DLE
* This is an estimated value. Actual lumens will depend on the implementation. PDM-101
Ordering Information Item DLE C-101 PDS-150e PDS-60 24V
Item Number 10° Beam Angle
118-000144-00
28° Beam Angle
118-000144-03
120° Beam Angle
118-000144-02 109-000008-01 109-000017-00 109-000017-03
PDM-101
118-000052-00
PDM-103
118-000054-00
E The DLE C-101 can use Philips Color Kinetics PDS-150e or PDS-60 power / data supplies as well as PDM-101 and PDM-103 power / data modules.
C-101
C-101
C-101
+24V Data COM + -
DMX Input 24VDC Power Supply
+ -
Typical Installation Using Color Kinetics PDM-101 Power / Data Module, Multiple DLEs
C3 105° C Max
Compatible Power / Data Devices Power / Data Source
D4-D10-D14 85° C Max
PDS-60 24V
Y1 85° C Max U1 85° C Max
Max. Quantity of DLEs 2
PDS-150e
6
PDM-101
Variable*
PDM-103
Variable*
* The number of DLEs supported depends on the wattage of the power supply used in the implementation.
Suggested maximum temperatures at thermal measurement test points
Philips Color Kinetics 3 Burlington Woods Drive Burlington, Massachusetts 01803 USA Tel 888.385.5742 Tel 617.423.9999 Fax 617.423.9998 www.philipscolorkinetics.com
Copyright © 2011 Philips Solid-State Lighting Solutions, Inc. All rights reserved. Chromacore, Chromasic, CK, the CK logo, Color Kinetics, the Color Kinetics logo, ColorBlast, ColorBlaze, ColorBurst, eW Fuse, ColorGraze, ColorPlay, ColorReach, iW Reach, eW Reach, DIMand, EssentialWhite, eW, iColor, iColor Cove, IntelliWhite, iW, iPlayer, Optibin, and Powercore are either registered trademarks or trademarks of Philips Solid-State Lighting Solutions, Inc. in the United States and / or other countries. All other brand or product names are trademarks or registered trademarks of their respective owners. Due to continuous improvements and innovations, specifications may change without notice. DAS-000090-01 R01 10-11
