Transcript
ULTIMATE PRO SERIES
DLS Svenska AB - Sweden
DLS UP6 PRODUCT SPECIFICATIONS 2-WAY CAR SYSTEM MODEL UP6 6,5” BASS MIDRANGE 28 MM SOFT DOME TWEETER FERRITE/NEODYMIUM HYBRID MAGNET SYSTEM 6,5”, 16 cm mid bass element: Dimensions: Outer diameter Magnet diameter Mounting depth Mounting hole Nominal power handling Transient power, 10 ms Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency Voice coil diameter Voice coil height Voice coil type / former Voice coil wire Number of layers
Specifications valid from 11-00.
165 mm 62 mm 63 mm 140 mm 150 W 180 W 4 ohms 89 dB 55-3500 Hz 64,8 Hz 54 mm (2”) 13 mm Aluminium Aluminium flat wire 2
DC resistance 3,55 ohm Voice coil inductance, 1 kHz 0,21 mH Magnet system Vented hybrid BL product, BXL 5,66 Max. linear excursion, X max +- 3,5 mm Suspension compliance, CMS 472 Mechanical Q factor, QMS 2,03 Electrical Q factor, QES 0,58 Total Q factor, QTS 0,45 Mechanical resistance, RMS 0,54 Moving mass, MMS 10,19 gr. Equivalent Cas Air load, VAS 10 liters Cone / Dome material Polyinjection cone SD - Effective piston area 122,8 cm2 Net weight 0,60 kg
25 mm tweeter element UP1C: Dimensions: Overall dimensions Mounting depth Mounting hole Nominal power handling Maximum power Nominal impedance, Z Sensitivity, 1 W / 1m Frequency response Fs, resonant frequency
Voice coil diameter Voice coil height Voice coil type / former Voice coil wire Magnet system Dome material
44,5 mm 23 mm 48 mm 50 W 80 W 4 ohms 91 dB 1 - 23 kHz 950 Hz
Filter box drawing: Art.no: 9-25510A Signal input +
8,2 µF
+ + -
4Ω
3,3 µF
123456 123456 123456
1,2 Ω
0,2 mH
Tweeter
Tweeter level select
Subject to change without further notice
0,25 mH 12345
12345 12345 2,7 Ω
6,8 µF
Mid-bass
28 mm 2,2 mm Aluminium Aluminium flat wire Neodymium Hand treated fabric
