Dm 880/881

Transcript

Your Solution for Better Communications DM 880/881 Scalable Multi-Service Provisioning Platform FEATURES • • • • • • • • • • • • • • • • • • Scalable and fully modular, 10U high, Multi-Service Provisioning Platform Available in 2 chassis versions supporting up to STM-64 data rates 17 I/O-slot base-unit MPU modules available supporting up to STM-4, STM-16 or STM-64 interfaces Extensive interfaces and services support • Up to 4 x STM-64 ports; up to 24 x STM-16 ports; up to 48 x STM-4 ports and up to 96 x STM-1 ports • Up to 36 x E3/T3 ports and up to 384 x E1 ports • Up to 96 x Fast Ethernet ports and up to 12 Gigabit Ethernet ports Next Generation Ethernet-over-SDH services fully supported with Virtual Concatenation, GFP multiplexing and LCAS standards compliance SDH switching capability from 7.4G HO/LO up to 80G HO/LO depending on the MPU module selected The DM 880/881 platform can be utilized in a variety of topologies: Point-to-Point, Star, Ring and/ or Meshed. DS0 (N x 64 kbps) cross-connection matrix from 384 x E1s up to 1,000 x E1s depending on the MPU module selected. Extensive protection mechanisms including: MS-SPRing (2F~4F), SNCP and MSP line protection. Advanced Ethernet services including Layer2 switching, VLAN tagging, QoS/CoS DiffServ, flow and bandwidth control Built-in Frame Relay, PPP router for data and management Support of SFP and XFP modules for STM-1/4/16/64 interfaces Built-in dual DC power supply inputs 1+1 protection for switch matrix, synchronism, control and line interfaces 1+N protection for E1/E3/T3 interfaces Hot swappable modules Element management via HTTP and full NMS capabilities via DMView Enterprise DM 800Plus module. DESCRIPTION • The DM 880/881 is a fully modular, scalable multiservice provisioning platform. Supporting both SDH switching matrix and DS0 cross-connect matrix the DM 880/881 covers a wide range of applications from high-capacity E1 cross-connect to STM-N SDH Add-Drop Multiplexer. The DM 880/881 is the ideal platform for backbone and aggregation nodes for multi-service networks for fixed, wireless and cellular networks. • The 10U high base unit provides 17 slots: • 2 DC power supply slots with 1+1 redundancy • 2 MPU-Main Processing Unit slots • 12 I/O slots for multiple modules (from E1 up to STM-64) • 1 slot for Fan/Ventilation • The DM 880/881 is a scalable system; each of the MPU modules provides custom capabilities. (See SPECIFICATIONS.) The platform is designed for maximum flexibility allowing for constant growth and new services as the requirement arises maximizing return-on-investment. • While the DM 880 is suitable for highercapacity SDH backbone applications, the DM 881 offers a cost-efficient solution benefiting smaller applications sharing the same platform and system/interface modules while providing the same redundancy and protection features as the DM 880. The DM 881 can perform as a large DS0 (Nx64kbps) cross-connect allowing grooming for a large number of E1 ports. Supporting up to 384 E1 ports, the DM 881 can also be equipped with STM-1/4 SDH interfaces allowing it to be utilized in collecting rings and as ring master. • The Fast Ethernet and Gigabit Ethernet interface modules adhere to the latest NewGeneration standards and support VCATVirtual Concatenation, GFP-Generic Framing Procedure and LCAS-Link Capacity Adjustment Scheme among others. These features ensure interoperability with other vendors and enable easy integration into existing SDH networks. Your Solution for Better These modules also support Layer 2 switching with VLANCommunications functionalities and Class of Service (classifying • • • • services according to port, VLAN tag or DSCP) in addition to Flow and Bandwidth Control guaranteeing constant data flow. The DM 880/881 platform has a variety of interface modules allowing operators to deploy the system in different locations for a variety of requirements. In order to maximize deployment, STM-1/4/16/64 interfaces are provided via XFP and SFP (Small Formfactor Pluggable) modules providing an extensive array of options for different wavelengths and ranges capabilities. All modules are hot-swappable allowing for the addition or exchange of services in real-time with minimal network downtime. Several SDH protection mechanisms are supported ensuring system configuration flexibility and interoperability with other vendors: • MSP-Multiplex Section Protection for 1+1 link redundancy • SNCP-Sub-Network Connection Protection for path redundancy, per VC12, VC3 and VC4 • MS-SPRing (MS-Shared Protection Ring) for STM4/16/64, over 2-fibers or 4-fibers. DM 880/881 implements EPS (Equipment Protection System) for port protection, allowing: • E1 tributary protection 1:N (when N<5 in 2 groups) • E3/T3 tributary protection 1:N (when N<5 in 2 groups) Six levels of synchronization are supported. Each level corresponds to a different source of synchronization (Different interfaces, each capable of regenerating the clock). Levels can be configured as follows: • Hierarchy – Priority is set according to the highest SDH hierarchy to the lowest and is always automatically selected. Synch Messages – Based on clock quality. In a SDH network S1 bytes from the multiplexing section indicate quality. The DM 880/881 configuration can be performed via: • Terminal (or VT1000 emulator) • Telnet (Ethernet port) • WEB (HTTP) interface Terminal and Telnet allow for Network Parameter configuration while the WEB interface (Shelf View) permits the operator to see device status including interfaces and modules through a user -friendly GUI. The Shelf View provides status indicators for the power supplies, temperature, interface modules, MPUs, MPU interfaces and alarms in general in addition to configuration of all parameters in all modules and levels. Network and Circuit Management and Configuration Tasks are executed via the DM View Enterprise DM 800Plus module. This module allows the operator to benefit from carrier-class NMS, providing among others, the following functionalities: • Failure identification and diagnostics • NE-Network Element configuration • Network provisioning (circuit service center) • Topological maps • Inventory reports • Performance reports • Users, groups and permissions - security The DM 880/881 is a highly reliable platform, providing several levels of redundancy and protection, achieving very high levels of availability, maintaining low operational costs while ensuring optimal network resources. • • • • • SDH Backbone and Aggregation Your Solution for Better SPECIFICATIONS Communications Chassis Options 10U high chassis for 19" rack. Supports up to STM-64 data rates 2 slots for MPUs (Main Processing Units) 12 slots for ICs (Interface Cards) - 4 slots for HC and IC cards - 8 slots for IC cards DM 880 Chassis 2 slots for GPCs (General Purpose Cards) Fan module with redundancy Hot-swap support for all slots -48 / -60 VDC redundant power supply DM 881 Chassis See DM 880 - limited to STM-4 data rates Main Processing Units 7.4 GB HO/LO SDH switching matrix for VC-4 and VC-3/12 (equivalent to 48x48 STM-1/VC4 lines or 144xVC3 lines or 3024xVC12 lines) 384 x E1 DS0 cross-connection matrix 2 slots for STM-1 or/and STM-4 SFP modules DM 800-MPU622 Main Processing Unit available for DM 880 and 881 Multiple rings with SNC or MS-SPRing protection. 2 modules can be used to connect to 2 STM4/1 rings. G.813 synchronism, External clock input and output (2MHz or 2Mbps). Supports up to 6 clocking hierarchies with clock commuting according to Hierarchy or Sync. Messages (clock quality) Ethernet 10BaseT/100BaseTX (router) and RS232 management interface Alarms interface (DB15 connector). 2 Output and 4 Input alarms Supports 1+1 MPU redundancy and 2+2 STM-1/4 simultaneous SFP modules Supports E1, E3, T3, Ethernet and Gigabit Ethernet, STM-1 and STM-4 ICs-Interface Cards (STM-4 and STM-1 on HC slots) 40 GB HO/LO SDH switching matrix for VC-4 and VC-3/12 (equivalent to 256x256 STM-1 lines) 504 x E1 DS0 cross-connection matrix Multiple rings with SNC or MS-SPRing protection. DM 800-MPU2500 G.813 synchronism, External clock input and output. Supports up to 6 clocking hierarchies with clock commuting according to Hierarchy or Sync. Messages (clock quality) Main Processing Unit available for DM 880 Ethernet 10BaseT/100BaseTX (router) and RS232 management interface Alarms interface (DB15 connector). 2 Output and 4 Input alarms Supports 1+1 MPU redundancy Supports E1, E3, T3, Ethernet and Gigabit Ethernet, STM-1, STM-4 and STM-16 ICs-Interface Cards (STM-16 on HC slots) 80 GB HO SDH switching matrix for VC-4, 10GB for VC-3/12 and 512x512 STM-1 crossconnection matrix 1000 x E1 DS0 cross-connection matrix DM 800-MPU10G Main Processing Unit available for DM 880 (*) Multiple rings with SNC or MS-SPRing protection. G.813 synchronism, External clock input and output Ethernet (router) and RS232 management interface Alarms interface (DB15 female connector) Supports 1+1 MPU redundancy Supports E1, E3, T3, Ethernet and Gigabit Ethernet, STM-1, STM-4, STM-16 and STM-64 ICsInterface Cards (STM-64 on HC slots) * Please check for feature availability in selected software versions. Your Solution for Better 1 STM-64 port per module CommunicationsSupports XFP modules for a variety of ranges and wavelength options Interface Cards DM 800-HCSTM64 Single-port STM-64 interface module (*) Supports MSPRing Protection on 2 or 4 fibers Requires DM 800-MPU10G MPU module To be used in HC slots only Optional integrated 15dB booster module (DM 800-HCSTM64-OAB15) (*) 2 x STM-16 ports per module DM 800-HC2STM16 Dual-port STM-16 interface module Supports SFP modules for a variety of ranges and wavelength options Supports MSPRing Protection on 2 or 4 fibers Requires DM 800-MPU2500 MPU module, or higher To be used in IC or HC slots. When used on IC slot, with a DM 800-MPU2500 system, only 1 port is enabled. 4 x STM-4 ports per module DM 800-IC4STM4 Four-port STM-4 interface module Supports SFP modules for a variety of ranges and wavelength options Supports MSPRing Protection on 2 or 4 fibers Requires DM 800-MPU2500 MPU module, or higher May be used on HC slots, with a DM 800-MPU622 system, enabling 1 port 8 x STM-1 ports per module DM 800-IC8STM1 Eight-port STM-1 interface module Supports SFP modules for a variety of ranges and wavelength options Supports electrical SFP modules Requires DM 800-MPU2500 MPU module, or higher May be used on HC slots, with a DM 800-MPU622 system, enabling 4 ports 3 x E3/T3 ports available on BNC connectors DM 800-IC3x34/45 Three-port 34/45 Mbps interface module Supports 34 Mbps (E3) transparent/structured flows or transparent 45 Mbps (T3) flows Traffic mapped on STM-N payload, E3/T3, E1 interfaces or cross-connected to DS0 matrix Supports 1:N EPS protection (N<5) Loops and BERT tests 32 x E1 interfaces available on Telco64 connectors Supports 1:N EPS protection (N<5) DM 800-IC32E1P 32-port electrical E1 interface module w/protection Compatible with ITU-T G.703/G704 Framed or Transparent operation Transmission rate: 2048 kbps HDB3 coding, 75 Ohms May be mapped to STM-N payload or cross-connected to DS0 matrix Loops and BERT tests 32 x E1 interfaces available on 2xTelco64 connectors DM 800-IC32E1 32-port electrical E1 interface module Compatible with ITU-T G.703/G704 Framed or Transparent operation Transmission rate: 2048 kbps HDB3 coding, 75 or 120 Ohms (strap selectable) May be mapped to STM-N payload or cross-connected to DS0 matrix Loops and BERT tests * Please check for feature availability in selected software versions. Your Solution 8 x Fast Ethernet 10BaseT/100BaseTx ports on RJ45 connectors. Full and Half-Duplex for Better (IEEE802.3) CommunicationsVirtual Concatenation and GFP multiplexing (GFP-F Null and GFP-F Linear modes) DM 800-IC8FE155 8-port Fast Ethernet interface module GFP (ITU-T G.7041) and LCAS (ITU-T G.7042) L2 wire-speed switching capability between all ports Supports IEEE 802.1Q VLAN tagging Supports IEEE 802.1p and DiffServ QoS/CoS per Port, per VLAN or per DSCP (RFC 2474). Flow control (backpressure and pause frames) and bandwidth control May be mapped on up to 63xVC12 or 3xVC3 1 SFP-Gigabit Ethernet port or 8 x Fast Ethernet 10BaseT/100BaseTx ports available on RJ45 connectors. Full and Half-Duplex (IEEE802.3) Gigabit Ethernet port selectable between electrical or optical SFP DM 800-ICGbE155 1-port GbE or 8-port Fast Ethernet interface module Virtual Concatenation and GFP multiplexing (GFP-F Null and GFP-F Linear modes) GFP (ITU-T G.7041) and LCAS (ITU-T G.7042) L2 wire-speed switching capability between all ports Supports IEEE 802.1Q VLAN tagging Supports IEEE 802.1p and DiffServ QoS/CoS per Port, per VLAN or per DSCP (RFC 2474). Flow (backpressure & pause frames) and bandwidth control (FE) May be mapped up to 63xVC12 or 3xVC3 General Purpose Cards 1 voice interface with IP address dialing capability to any adjacent unit. Available with RJ11 connector. May be mapped to overhead bytes. DM 800-GPCHK1 2 RS232 interfaces on a single RJ45 connector. May be mapped to overhead bytes. For monitoring and configuration of external equipment. Housekeeping module 1 V.11 interface on a DB15 connector. May be mapped to overhead bytes or HDLC. May be used for data transport or management applications. 6 digital and 2 analog alarm inputs, 4 alarm outputs and 2 voltage monitoring interfaces. Available on a DB44 connector. Fan Module DM 800-FAN Fan module required for DM 880/881 systems. 8 individual fans. Redundant operation and hot-swap supported. Amplifiers DM 900-OAB15 Active booster Erbium-Doped Fiber Amplifier (EDFA). 1530~1560nm; programmable output power up to 15dBm. May be managed through DM 880/881 or locally. Fits into a DM 800ICAD2 adapter module. DM 900-OAP Active Erbium-Doped Fiber Pre-Amplifier (EDFA). 1530~1560nm. May be managed through DM 880/881 or locally. Fits into a DM 800-ICAD2 adapter module. DM 900-DCM40 40km Passive Chromatic Dispersion Compensation Module. Used in conjunction with boosters or pre-amplifiers in long-distance SDH links up to 10Gbps. Fits into a MA-13 tray or DM 800ICAD2 adapter module. General Dimensions Width: 483 mm (19") Height: 442 mm (10U) Depth: 272 mm Weight DM 880/881 – chassis: 13.0 kg DM 880-FAN: 4.4 kg DM 800-MPU622: 0.7 kg (not including STM-1/4 SFPs) DM 800-IC32E1: 0.6 kg DM 800-IC8FE155: 0.6 kg DM 800-ICGbE155: 0.6 kg Environmental Operation Temperature: 0o to 50o C Storage / Transportation: -40o to 70o C Humidity: 10% up to 95% non-condensing Your Solution Power Input: -48 / -60VDC, redundant input for Better 3W3 D-sub Type connector CommunicationsPower Consumption: 215W to 930W (fully loaded) DM 880/881 – Chassis + FAN 170 W Electrical DM 800-MPU622 35W DM 800-IC32E1 11W DM 800-IC8FE155 10W DM 800-ICGbE155 10W Standards Compliance (partial list) ITU-T G.703, G.704, G.707, G.783, G.806, G.813, G.823, G.825, G.826, G.841, G.842, G.957, G.7041, G.7042, V.11, T.50 IEEE 802.3 ,802.3u, 802.3z, 802.3ab, 802.3x, 802.3ac, 802.1Q, 802.1p IETF RFC1157, RFC1812, RFC1213 TYPICAL / MAXIMUM CONFIGURATIONS • DM 880/881 with MPU622 Module Max. Num Ports DM 880 DM 881 IC1 IC2 IC3 IC4 IC5 IC6 MPU1 MPU2 IC7 IC8 IC9 IC10 IC11 IC12 E1 384 384 32 32 32 32 32 32 32 32 32 32 32 32 FE 96 96 8 8 8 8 8 8 8 8 8 8 8 8 GbE 12 12 1 1 1 1 1 1 1 1 1 1 1 1 STM-1 20 20 4 4 2 2 4 4 STM-4 8 8 1 1 2 2 1 1 • DM 880 with MPU2500 Module Max. Num Ports DM 880 IC1 IC2 IC3 IC4 IC5 IC6 E1 384 32 32 32 32 32 FE 96 8 8 8 8 8 GbE 12 1 1 1 1 E3/DS3 36 3 3 3 3 STM-1 96 8 8 8 STM-4 48 4 4 4 STM-16 16 1 1 1 MPU1 MPU2 IC7 IC8 IC9 IC10 IC11 IC12 32 32 32 32 32 32 32 8 8 8 8 8 8 8 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 8 8 8 8 8 8 8 8 8 4 4 4 4 4 4 4 4 4 1 2 2 2 2 1 1 1 1 Your Solution for Better Communications • DM 880 with MPU10G Module Max. Num Ports DM 880 IC1 IC2 IC3 IC4 IC5 IC6 E1 384 32 32 32 32 32 FE 96 8 8 8 8 8 GbE 12 1 1 1 1 E3/DS3 36 3 3 3 3 STM-1 96 8 8 8 STM-4 48 4 4 4 STM-16 24 2 2 2 STM-64 4 MPU1 MPU2 IC7 IC8 IC9 IC10 IC11 IC12 32 32 32 32 32 32 32 8 8 8 8 8 8 8 1 1 1 1 1 1 1 1 3 3 3 3 3 3 3 3 8 8 8 8 8 8 8 8 8 4 4 4 4 4 4 4 4 4 2 2 2 2 2 2 2 2 2 1 1 1 1 ORDERING DM 880 – Base Unit. 10U high chassis: 2 slots for MPUs, 12 slots for ICs, 2 slots for GPCs and 1 slot for fan module. Supports STM-1 up to STM-4 (MPU622). Redundant DC input included. DM 881 – Base Unit. 10U high chassis: 2 slots for MPUs, 12 slots for ICs, 2 slots for GPCs and 1 slot for fan module. Supports STM-1, STM-4, STM-16 up to STM-64 (MPU622, 2500 and 10G).Redundant DC input included. Modules Main Processing Units - MPUs + DM 800-MPU622 – STM-1/4 processing module; 7.4G SDH switching matrix; 384xE1 DS0 cross-connection matrix; 2xSTM-1/4 interfaces via SFP modules + DM 800-MPU2500 – STM-1/4/16 processing module; 40G SDH switching matrix; 504xE1 DS0 cross-connection matrix + DM 800-MPU10G – STM-1/4/16/64 processing module; 80G SDH switching; 1GxE1 DS0 cross-connection matrix Interface Cards – ICs + DM 800-IC32E1 – 32-port E1 interface card + DM 800-IC32E1P – 32-port E1 interface card with 1:N protection + DM 800-IC8FE155 – 8-port FE interface card (up to 3xVC3 mapping); GFP and VCAT + DM 800-ICGBE155 – 8-port FE or 1-port GbE (optical or electrical); GFP and VCAT (up to 3xVC3 mapping) + DM 800-IC3x34/45 – 3-port E3/DS3 interface card + DM 800-IC8STM1 – 8-port STM-1 interface card (SFP) + DM 800-IC4STM4 – 4-port STM-4 interface card (SFP) + DM 800-HC2STM16 – 2-port STM-16 interface card (XFP) + DM 800-HCSTM64 – 1-port STM-64 interface card (XFP) + DM 800-HCSTM64-OAB15 – 1-port STM-64 (XFP) with built-in booster module General Purpose Cards – GPCs + DM 800-GPCHK1 – Housekeeping, V.11, clock and voice service channel module Optical Accessories + DM 900-OAB15 – EDFA active programmable booster module + DM 900-OAP – EDFA active Pre-Amplifier + DM 900-DCM40 – 40km Passive Chromatic Dispersion Compensation Module Accessories + AD-TL64 – Telco 64 adapter kit for 32 coaxial cables (16xE1) to DM 800-IC32E1 module + RB09-BNC – 19", 1U panel for 16xE1 tributaries. 32xBNC connectors and 1,5m cable plus Telco64 adapter + RB09-IEC – 19", 1U panel for 16xE1 tributaries. 32xIEC connectors and 1,5m cable plus Telco64 adapter + RB09-RJ45 – 19", 1U panel for 16xE1 tributaries. 16xRJ45 connectors and 1,5m cable plus Telco64 adapter + DM 800-ICAD2 – Adapter module with 2 slots for DM900-DCM/OAB/OAP amplifier or compensation modules Your Solution + + + + + + DM 800-BP-MPU – Blank panel for unused MPU slots of DM 880/881 for Better DM 800-BP-IC – Blank panel for unused IC slots of DM 880/881 DM 800-BP-GPC – Blank panel for unused GPC slots of DM 880/881 Communications DM 800-BP-ICAD2 – Blank panel for unused ICAD slots of DM 880/881 MA-11 – 19" cable tray organizer for fiber optic cables. Installed on lower front portion of DM 880/881 MA-12 – 19", 2U cable tray organizer for data cables (UTP or coax). Installed on top front portion of DM 880/881 + MA-13 – 19", 0,5U tray for up to 3 DM900-DCM modules SFP and XFP modules STM-64 + XFP SS13/STM-64 (DD) optical module; singlemode; 1310nm; ~10km range + XFP SS15/STM-64 (DD) optical module; singlemode; 1550nm; ~40km range + XFP SL15/STM-64 (DD) optical module; singlemode; 1550nm; ~80km range + XFP SLx15/STM-64 (DD) optical module; singlemode; 1550nm; ~120km range STM-16 + SFP SS13/STM-16MR (DD) optical module; singlemode; multi-rate; 1310nm; ~2km range + SFP SS13/STM-16 (S16.1) optical module; singlemode; 1310nm; ~15km range + SFP SL15/STM-16 (L16.2) optical module; singlemode; 1550nm; ~80km range STM-4 + + + + + + + SFP SFP SFP SFP SFP SFP SFP SS13/STM-4MR (S4.1) optical module; singlemode; multi-rate; 1310nm; ~2km range SS13/STM-4 (S4.2) optical module; singlemode; 1550nm; ~15km range SL13/STM-4 (L4.1) optical module; singlemode; 1310nm; ~50km range SL15/STM-4 (L4.2) optical module; singlemode; 1550nm; ~80km range SLx15/STM-4 (ExtL4.2) optical module; singlemode; 1550nm; ~110km range SSB13/STM-4 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~20km range SSB15/STM-4 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~20km range STM-1 + + + + + + + + + + SFP SFP SFP SFP SFP SFP SFP SFP SFP SFP SS13/STM-1 (S1.1) optical module; singlemode; 1310nm; ~30km range SS15/STM-1 (S1.2) optical module; singlemode; 1550nm; ~50km range SL13/STM-1 (L1.1) optical module; singlemode; 1310nm; ~40km range SL15/STM-1 (L1.2) optical module; singlemode; 1550nm; ~100km range SLx15/STM-1 (ExtL1.2) optical module; singlemode; 1550nm; ~120km range SSB13/STM-1 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~25km range SSB15/STM-1 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~25km range SLB13/STM-1 (DD) optical module; singlemode; single fiber; 1310nmRx/1550nmTx; ~60km range SLB15/STM-1 (DD) optical module; singlemode; single fiber; 1550nmRx/1310nmTx; ~60km range STM-1E G.703 electrical module Wireless Backhaul ©2007 Ieru Communications Ltd. All rights reserved. Features and Specifications are subject to change without prior notice. *All other brands/names/trademarks are the property of their respective owners. Version 1.05 12-07