Transcript
Products Guide
For information about products and prices Sales Info-line :+886-2-2643-8458 :
[email protected]
We Deliver Excellent Product Efficient Support
12F, No.181, Sec. 1, Tatung Rd., Hsichih City, Taipei Hsien 221,Taiwan, R.O.C. TEL: 886-2-2643-8458 FAX: 886-2-2643-8459 E-mail:
[email protected]
V100107
Eternal Service
WLAN Communications 802.11n WLAN AP Router 802.11n WLAN USB Dongle 802.11b/g WLAN AP Router 802.11b/g WLAN USB Dongle
1 1 3 11 13
WLAN ADSL2+ Router 802.11n WLAN ADSL2+ Router 802.11b/g WLAN ADSL2+ Router
15 15 19
Wired ADSL2+ Router
23
ADSL USB Modem
29
PowerLine Series PowerLine WLAN ADSL2+ Router 200Mbps Powerline Ethernet Adapter 200Mbps Powerline Ethernet AP Router
31 31 33 35
Switch Series 5-Port 10/100/1000 Gigabit Ethernet Switch 8-Port 10/100/1000 Gigabit Ethernet Switch
37 37 38
IAD Series Superior IAD Advance IAD with Host-USB interface Optimize IAD Basic IAD
39 39 41 43 45
VoIP Series WLAN VoIP Gateway VoIP ATA VoIP Phone
47 47 49 51
56K Modem PCI 56K V.92 Modem USB 56K V.92 Modem RS232 56K V.92 Modem
53 53 54 55
802.11b/g/n WLAN High Power AP Router
WLAN
This IEEE 802.11n Wireless Hight Power AP Router is designed g for SOHO users. It allows users to enjoy wireless network k and easy wireless security connection.
802.11b/g/n WLAN High Power AP Router
REI150R4-DT-1T1R
n
Detachable Antenna
8 802.11 1
Features
WAN Protocols /Interfaces
z IEEE 802.11n compliance. Backwards compatible
z Ethernet interface
with 802.11b/g z Support Wifi ON/OFF switch button
150 Mbps
WPS
WLAN ON/OFF
1T1R
z Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards.
z Support Wifi WPS switch button
z 10/100 Mbps auto selection
z 802.11n : Up to 150Mbps
z Ethernet port supports Automatic MDI/MDI-X
z Supports 802.11g data rates of up to 54 Mbps
4-Port
REI150R4-DT-1T1R (Infinity)
REI150R4-DT-1T1R (Elegant)
configuration transceiver.
z Supports 802.11b data rates of up to 11 Mbps z Compliant transmit modulation accuracy and transmit power spectral density z IEEE 802.11i Security supports 64/128-bits WEP, WPA, WPA2, WPS and WDS
z Ethernet interface z Support 4 Ports Ethernet Interface which compliant with IEEE 802.3x standards.
z MAC Address Filter
z 10/100 Mbps auto selection
z Multi-SSID
z Ethernet port supports Automatic MDI/MDI-X
z IEEE 802.11e QoS enhancement (WMM)
REI150R4-DT-1T1R R (Infinity)
LAN Protocols /Interfaces
configuration transceiver.
RF Output Power
Hardware interfaces
z 26dBm +/-1dBi for 802.11b
z 1 Power jack
z 22dBm +/-1dBi for 802.11g
z 1 Power switch for power on /off
z 19dBm +/-1dBi for 802.11n
z 1 Reset button for reset to factory default function
REI150R4-DT-1T1R (UFO)
z 1 Ethernet jack for WAN port connection
WAN IP Assignment
z 4 Ethernet jack for LAN ports connection
z Static IP
z 1 External antenna
z DHCP client
z 1 Wifi ON/OFF switch button
z PPPoE client
z 1 Wifi WPS switch button
* Detachable Antenna by optional.
Configuration z Web Browser z Windows base Easy setup program
Operating Frequency /Channel z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz z Japan 14 channels: 2.412GHz ~ 2.484GHz
01
02
802.11b/g/n WLAN AP Router RE150R4-1T1R / RE150R4-DT-1T1R
RE300R4H-2T2R / RE300R4-2T2R / RE300R4-DT-2T2R
This IEEE 802.11n Wireless AP Router is designed for SOHO users. It allows users to enjoy wireless network and easy wireless security connection.
n
802.11
Detachable Antenna
WLAN
802.11b/g/n WLAN AP Router Features
WAN Protocols /Interfaces
z IEEE 802.11n compliance. Backwards compatible
z Ethernet interface
with 802.11b/g z Support Wifi ON/OFF switch button
300 150 Mbps
Mbps
RE300R4
RE150R4
WPS WLAN 2T2R ON/OFF RE300R4
1T1R
USB Host
RE150R4
RE300R4H
4-Port
z Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards.
z Support Wifi WPS switch button
z 10/100 Mbps auto selection
z 802.11n : Up to 300Mbps (RE300R4 only)
z Ethernet port supports Automatic MDI/MDI-X
z 802.11n : Up to 150Mbps (RE150R4 only)
RE300R4-2T2R (Elegant) RE300R4-DT-2T2R (Elegant)
RE300R4-2T2R (UFO) RE300R4-DT-2T2R (UFO)
configuration transceiver.
z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6
LAN Protocols /Interfaces
Mbps
z Ethernet interface
z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps
z Support 4 Ports Ethernet Interface which compliant with IEEE 802.3x standards.
z Supports long and short preamble modes
z 10/100 Mbps auto selection
z Compliant transmit modulation accuracy and
z Ethernet port supports Automatic MDI/MDI-X
transmit power spectral density
configuration transceiver.
z IEEE 802.11i Security supports 64/128-bits WEP, WPA, WPA2, WPS and WDS
RE300R4-2T2R (Infinity) RE300R4-DT-2T2R (Infinity)
RE150R4-1T1R (Infinity) RE150R4-DT-1T1R (Infinity)
USB Protocol /Interface (RE300R4H only)
z MAC Address Filter
z Support 1 port USB compliant USB 2.0 Host
z Multi-SSID
z SAMBA server application
z IEEE 802.11e QoS enhancement (WMM)
Hardware interfaces WAN IP Assignment
z 1 Power jack
z Static IP
z 1 Power switch for power on /off
z DHCP client
z 1 Reset button for reset to factory default function
z PPPoE client
z 1 Ethernet jack for WAN port connection
RE150R4-1T1R (Elegant) RE150R4-DT-1T1R (Elegant)
z 4 Ethernet jack for LAN ports connection
Configuration
z 1 USB 2.0 Host (RE300R4H only)
z Web Browser
z 2 External antenna
(RE300R4 only)
z Windows base Easy setup program
z 1 External antenna
(RE150R4 only)
z 1 Wifi ON/OFF switch button
Operating Frequency /Channel
z 1 Wifi WPS switch button
z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz z Japan 14 channels: 2.412GHz ~ 2.484GHz
RE150R4-1T1R (UFO) RE150R4-DT-1T1R (UFO)
RE300R4H-2T2R (Infinity) * Optional Detachable Antenna. 03
04
WLAN
802.11b/g/n WLAN USB Adapter
n
RE300U-PA-2T2R / RE300U-PA-1T2R
802.11b/g/n WLAN USB Adapter
1T2R
802.11
300 WPS WPA WPA2 WEP 100m 300m Mbps Outdoor Indoor 2T2R
USB
Standard z IEEE 802.11n compliance. Backwards compatible with 802.11b/g
Data rate z 802.11n : Up to 300Mbps (for RE300U-PA-2T2R) z 802.11n (40MHz): Up to 150/300Mbps
RE300U-PA-1T2R
IEEE802.11n PHY rate
54
IEEE802.11g
Mbps
(for RE300U-PA-1T2R) z 802.11n (20MHz): Up to 75/150Mbps
300 Mbps
IEEE802.11n
IEEE802.11b
11
Mbps
(for RE300U-PA-1T2R) z 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps z 802.11b: 11, 5.5, 2, 1Mbps
RE300U-PA-2T2R
Operating Frequency /Channel z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz z Japan 14 channels: 2.412GHz ~ 2.484GHz
This RE300U IEEE 802.11n
RF Output Power z 17dBm +/-1dBi for 802.11b
(1Tx2R MIMO or 2Tx2R MIMO) Wireless USB2.0
z 15dBm +/-1dBi for 802.11g
Adapter is designed for SOHO users.
z 14dBm +/-1dBi for 802.11n
It allows users to enjoy wireless network
Standards supported
and easy wireless security connection.
Interface z USB 2.0 compatible
Environmental Specifications z Operating Temperature: 0°C ~ 50°C z Humidity: 10% ~ 90% (non-condensing)
Certification z CE, FCC P15, C-Tick, VCCI
z IEEE 802.11e QoS enhancement (WMM) z IEEE 802.11i z Cisco Compatible Extensions (CCX4)
Security z 64/128-bits WEP Encryption z WPA z WPA2 z WPS 05
06
WLAN
802.11b/g/n WLAN USB High Power Adapter REI150U-DT-1T1R
802.11b/g/n WLAN USB High Power Adapter Detachable Antenna
150 WPS 1T1R WPA WPA2 WEP Mbps Standard
USB
IEEE802.11n PHY rate
z IEEE 802.11n Draft 2.0 compliance. Backwards compatible with 802.11b/g
150 Mbps
IEEE802.11n
High Power
Data rate
54
IEEE802.11g
z 802.11n : 150Mbps z 802.11g : 54Mbps
Mbps
IEEE802.11b
11
Mbps
z 802.11b : 11Mbps
Operating Frequency /Channel
Interface
z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
z USB 2.0 compatible
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
z External Antenna
z Japan 14 channels: 2.412GHz ~ 2.484GHz
Environmental Specifications RF Output Power
z Operating Temperature: 0°C ~ 50°C
z 26dBm +/-1dBi for 802.11b
z Humidity: 10% ~ 90% (non-condensing)
z 22dBm +/-1dBi for 802.11g z 19dBm +/-1dBi for 802.11n
Certification z CE, FCC P15, C-Tick, VCCI
Receiver Sensitivity REI150U-DT-1T1R
z 11b: -87dBm@11Mbps z 11g: -74dBm@54Mbps z 11n: -71dBm@HT20,MCS7, -66dBm@HT40,MCS7
This REI150U IEEE 802.11n (1Tx1R MIMO)
Standards supported
Wireless USB2.0 High Power Adapter is designed for
z IEEE 802.11i
SOHO users. It allows users to enjoy wireless network and easy wireless security connection.
z IEEE 802.11e QoS enhancement (WMM)
z Cisco Compatible Extensions (CCX4)
Security z 64/128-bits WEP Encryption z WPA z WPA2 z WPS
07
08
WLAN
802.11b/g/n WLAN USB Adapter RE150U-DT-1T1R / RE150U-PA-1T1R
802.11b/g/n WLAN USB Adapter Detachable Antenna
150 WPS 1T1R WPA WPA2 WEP 100m 300m Mbps Outdoor Indoor Standard
USB
IEEE802.11n PHY rate
z IEEE 802.11n compliance. Backwards compatible with 802.11b/g
150 Mbps
IEEE802.11n
Data rate z 802.11n : Up to 150Mbps z 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
RE150U-PA-1T1R
54
IEEE802.11g
Mbps
IEEE802.11b
z 802.11b: 11, 5.5, 2, 1Mbps
11
Mbps
Operating Frequency /Channel z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
Environmental Specifications
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
z Operating Temperature: 0°C ~ 50°C
z Japan 14 channels: 2.412GHz ~ 2.484GHz
z Humidity: 10% ~ 90% (non-condensing)
RF Output Power
Certification
z 17dBm +/-1dBi for 802.11b
z CE, FCC P15, C-Tick, VCCI
z 15dBm +/-1dBi for 802.11g z 14dBm +/-1dBi for 802.11n
RE150U-DT-1T1R
RE150U-PA-1T1R
Standards supported • IEEE 802.11e QoS enhancement (WMM) • IEEE 802.11i
This RE150U IEEE 802.11n (1Tx1R MIMO) Wireless USB2.0 Adapter is designed for SOHO users.
• Cisco Compatible Extensions (CCX4)
Security z 64/128-bits WEP Encryption z WPA z WPA2
It allows users to enjoy wireless network and easy wireless security connection.
z WPS
Interface z USB 2.0 compatible z External Antenna
09
10
WLAN
802.11b/g WLAN AP Router RE54R4 / RE54R4-DT
802.11b/g WLAN AP Router
Detachable Antenna
Wireless LAN 802.11B/G z Support Wifi ON/OFF switch button z Support Wifi WPS switch button z Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem functions z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps z OFDM modulation with full-duplex MAC and half-duplex baseband z DBPSK, DQPSK and CCK modulation with full-duplex MAC and half-duplex base-band (BB) z Supports long and short preamble modes z Compliant transmit modulation accuracy and transmit power spectral density z Security supports 64/128-bits WEP, WPA, WPA2, WPS and WDS z MAC Address Filter z Multi-SSID
Operating Frequency /Channel z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
RE54R4-DT
z Japan 14 channels: 2.412GHz ~ 2.484GHz
This RE54R4 IEEE 802.11b/g Wireless AP Router is designed for SOHO users.
G
802.11
WPS WLAN ON/OFF
z Ethernet interface
z DHCP client
z Support 4 Ports Ethernet Interface which compliant with IEEE 802.3x standards. z 10/100 Mbps auto selection
Configuration z Web Browser
z Ethernet ports support Automatic MDI/MDI-X configuration transceiver.
z Windows base Easy setup program
easy wireless security connection..
Mbps
LAN Protocols /Interfaces
z Static IP z PPPoE client
It allows users to enjoy wireless network and
54
WAN IP Assignment
Hardware interfaces Transmission distance
z 1 Power jack
z Indoor: up to 100 meters
z 1 Power switch for power on /off
z Outdoor: up to 300 meters
z 1 Reset button for reset to factory default function z 1 Ethernet jack for WAN port connection
4-Port
WAN Protocols /Interfaces
z 4 Ethernet jack for LAN ports connection
z Ethernet interface
z 1 External antenna
z Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards
z 1 Wifi ON/OFF switch button
z 10/100 Mbps auto selection
z 1 Wifi WPS switch button
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver
RE54R4 11
12
WLAN
802.11b/g WLAN USB Adapter RE54U
802.11b/g WLAN USB Adapter 54
G
Mbps
802.11
m300m WPS WPA WPA2 WEP 100 Indoor Outdoor
USB
Standard
Physical Specifications
z IEEE 802.11B/G compliance
z Dimensions: 85.5(W) x 25.6(D) x 10(H) mm z Weight: 15g
Data rate z 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
Environmental Specifications
z 802.11b: 11, 5.5, 2, 1Mbps
z Operating Temperature: 0°C ~ 50°C z Humidity: 10% ~ 90% (non-condensing)
Operating Frequency /Channel RE54U
z USA (FCC) 11 Channels:2.412GHz ~ 2.462GHz
Certification
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
z CE, FCC P15, C-Tick
z Japan 14 channels: 2.412GHz ~ 2.484GHz
RF Output Power z 17dBm @ 11Mbps, typical +/-1dBi z 14dBm @ 54Mbps, typical +/-1dBi
Receiver Sensitivity z -80dBm @ 11Mbps
This RE54U IEEE 802.11b/g Wireless USB2.0 Adapter is designed for SOHO users. It allows users to enjoy wireless network and easy wireless security connection.
z -68dBm @ 54Mbps
Security z 64/128-bits WEP Encryption z WPA z WPA2
Interface z USB 2.0 compatible
Power Consumption z TX mode power consumption: < 300mA @ 5V z RX mode power consumption: < 250mA @ 5V
13
14
ADSL2+
802.11n WLAN ADSL2+ Router RN243R4-2T2R / RN243R4H-2T2R
The RN243R4 routers are high-speed ADSL2+ Ethernet router that is specifically designed to connect
802.11n WLAN ADSL2+ Router
to the Internet and to directly connect to your local area network (LAN) via high-speed 10/100 Mbps
ADSL Standard
Wireless Standard
z ITU-T G.992.1(G.dmt)
z IEEE 802.11n (MINO 2T2R) compliance. Backwards
Ethernet connection and/or Wireless 802.11n. The ADSL2+ modem is compatible with the latest ADSL standards, including ADSL2 and ADSL2+, and supports up to 24 Mbps downstream and 1.5 Mbps upstream to deliver true broadband speed and throughput.
300 WPS WLAN Mbps ON/OFF
24
Mbps
ADSL2+
4-Port
n
2T2R
z ANSI T1.413 Issue 2
compatible with 802.11b/g
z G.992.2 (G.lite)
z Support Wifi ON/OFF switch button
z G.994.1 (G.hs)
z Support Wifi WPS switch button
z Auto-negotiating rate adaptation
z Support 802.11n (MIMO 2T2R): Up to 300Mbps
z ADSL2 G.dmt.bis (G.992.3)
z Supports 802.11g data rates of up to 54 Mbps with
z ADSL2 G.lite.bis (G.992.4)
RN243R4-2T2R (Elegant)
RN243R4-2T2R (UFO)
automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps
z ADSL2+ (G.992.5)
z Supports 802.11b data rates of up to 11 Mbps with
Software Features
z Supports long and short preamble modes
z RFC-1483/2684 LLC/VC-Mux bridged/routed mode
z Compliant transmit modulation accuracy and transmit
automatic fallback to 5.5, 2, and1 Mbps
802.11
z RFC-1577 Classical IP over ATM z RFC-2516 PPPoE z RFC-2364 PPPoA
power spectral density z IEEE 802.11i Security supports 64/128-bits WEP, WPA,WPA2, WPS and WDS
z ITU-T 1.610 F4/F5 OAM send and receive loop-back
z MAC Address Filter
z 802.1d Spanning-Tree Protocol
z Multi-SSID
z DHCP Client/Server/Relay
z IEEE 802.11e QoS enhancement (WMM)
RN243R4-1T1R (Infinity)
z NAT z RIP v1/v2
Operating Frequency /Channel
z DNS Relay Agent
z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
z DMZ support
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
z IGMP Proxy/Snooping
z Japan 14 channels: 2.412GHz ~ 2.484GHz
z Stateful Packet Inspection
RN243R4-2T2R (Infinity)
z Protection against Denial of Service attacks
Ethernet LAN Protocols /Interfaces
z IP Packet Filtering
z Support 4 ports Ethernet Interface 10/100 Mbps auto
z QoS z Dynamic DNS z UPnP support
2T2R
USB
RN243R4-1T1R (Elegant)
selection which compliant with IEEE 802.3x standards z Ethernet port supports Automatic MDI/MDI-X configuration transceiver
Management
Hardware interface
z Web-based Configuration
z 1 Power jack
z Menu-driven Command-line Interpreter
z 1 Power switch for power on /off
z Telnet Remote Management
z 1 Reset button for reset to factory default function
z SNMP v1/v2/Trap
z 1 RJ11 phone jacks for ADSL connection
z Firmware upgrade through FTP, TFTP and HTTP
z 1 USB 2.0 Host (RN243R4H-2T2R only)
z Configuration backup/restore
z Ethernet jack for LAN port connection
z Diagnostic Tool
z Un-detachable antenna x 2 (MIMO 2T2R)
z TR069 supported (option)
z Wifi ON/OFF button
RN243R4-1T1R (UFO)
z WPS button
USB Protocols /Interfaces (RN243R4H only) z Support USB 2.0 Host port for Samba and file sharing
RN243R4H-2T2R (Infinity) 15
application 16
ADSL2+
802.11n WLAN ADSL2+ Router
TN263R4-2T2R (Infinity)
TN263R4-2T3R / TN263R4-2T2R / TN263R4-1T1R
802.11n WLAN ADSL2+ Router
The WLAN ADSL2+ Router combines 802.11n Wireless Access Point, ADSL2+ modem, router, four-ports switch, it offers quick access to the wired and
2T3R
wireless network. The device supports downstream rate up to 12 / 24 Mbps with capability of ADSL2 / ADSL2+, and upstream rate up to 1Mbps.
300 WPS WDS WLAN IPv6 Mbps ON/OFF
Mbps
ADSL2+
4-Port
n
TN263R4-2T3R (Elegant)
802.11
IEEE802.11n PHY rate
300
IEEE802.11n
WIRELESS
z Full-rate ANSI T1.413 Issue 2
z Compliant 802.11n
z ITU G.992.1 (G.dmt) Annex A or B
z 1T1R (TN263R4-1T1R only)
z Splitterless ITU G.992.2 (G.lite) specification
z 2T2R (TN263R4-2T2R only)
z ITU G.994.1 (G.hs)
z 2T3R (TN263R4-2T3R only)
z ITU G.992.3 (G.dmt.bis / ADSL2)
z Supports 64 / 128 bits WEP and WPA
z ITU G.992.5 (ADSL2plus)
z 300 Mbps PHY rate support
z Supports splitterless ADSL implementation
z Supports 802.11i (Security)
z Supports Dying Gasp
z Reverse Data Grant (RDG) Support z WLAN on/off switch
ATM SUBSYSTEM
2T3R
Mbps
54 Mbps
IEEE802.11g IEEE802.11b
24
ADSL COMPLIANCE
11
Mbps
TN263R4-2T2R (Elegant)
2T2R
TN263R4-2T2R (UFO)
z WPS Support
z PPP over ATM (RFC 2364) z Bridged IP over ATM (RFC 1483)
MANAGEMENT
z PPP over Ethernet (RFC 2516)
z TFTP client and server
z Multiprotocol Encapsulation over AAL5 (RFC 2684)
z DHCP client and server
z Supports up to 8 Virtual Channel Connections
z FTP server and client
(VCCs)
z Supports UBR, CBR, and VBR service classes
z Universal Plug and Play (UPnP) support
z ATM Forum UNI 3.1 / 4.0 PVC
z Web-based Graphical User Interface (GUI)
z Support OAM F4 / F5 look-back, AIS and RDI OAM cells
2T2R
TN263R4-1T1R (Infinity)
enabling end-user device configuration via HTTP z Update of boot image or configuration data via TFTP / FTP
TN263R4-2T3R (Infinity)
2T2R
FEATURES
z Syslog
z IP Alias
z Built-in Diagnostic Tools
z User Datagram Protocol (UDP)
z SNMP MIB support
z Transmission Control Protocol (TCP) z Internet Control Message Protocol (ICMP)
ETHERNET INTERFACE
z Internet Group Management Protocol (IGMP)
z IEEE 802.3
z PPP over PAP (RFC1334)
z 10 /100 Mbps
1T1R
TN263R4-1T1R (Elegant)
1T1R
z PPP over CHAP (RFC1994) z MIB II support (RFC1213) z Transparent bridging as specified in IEEE 802.1D z NAT (Network Address Translation) z Dynamic Host Configuration Protocol (DHCP)
TN263R4-1T1R (UFO)
z Dynamic DNS support z Routing Information Protocol (RIP) v1 and v2
17
1T1R
18
ADSL2+
802.11b/g WLAN ADSL2+ Router RW243R1/ RW243R4 / RW243R4H
802.11b/g WLAN ADSL2+ Router ADSL Standard
Wireless Standard
z ITU-T G.992.1(G.dmt)
IEEE 802.11B/G compliance
z ANSI T1.413 Issue 2
Data rate
z G.992.2 (G.lite)
z 802.11g: 54, 48, 36, 24, 18, 12, 9, 6Mbps
z G.994.1 (G.hs)
z 802.11b: 11, 5.5, 2, 1Mbps
z Auto-negotiating rate adaptation
Operating Frequency / Channel
z ADSL2 G.dmt.bis (G.992.3)
z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz z
z ADSL2 G.lite.bis (G.992.4)
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz GHz
z ADSL2+ (G.992.5)
z Japan 14 channels: 2.412GHz ~ 2.484GHz
RW243R4/R4H-X0
RF Output Power
Software Features
z 17dBm @ 11Mbps, typical +/-1dBi
z RFC-1483/2684 LLC/VC-Mux bridged/routed mode
z 14dBm @ 54Mbps, typical +/-1dBi
z RFC-1577 Classical IP over ATM
Receiver Sensitivity
z RFC-2516 PPPoE
z -80dBm @ 11Mbps
z RFC-2364 PPPoA
z -68dBm @ 54Mbps
z ITU-T 1.610 F4/F5 OAM send and receive loop-back
Security
z 802.1d Spanning-Tree Protocol
z 64/128-bits WEP Encryption
z DHCP Client/Server/Relay
z WPA
z NAT
z WPA2
z RIP v1/v2
z WPS
z DNS Relay Agent
RW243R1 and RW243R4/R4H routers are high-speed ADSL2+ Ethernet router that is specifically designed to connect to the Internet and to directly connect to your local area network (LAN) via high-speed 10/100 Mbps ps Ethernet and/or Universal Serial Bus (USB) connection and/or Wireless
G
802.11
Ethernet LAN Protocols /Interfaces
z IGMP Proxy/Snooping
z Support Ethernet Interface 10/100 Mbps auto selection
z Stateful Packet Inspection z Protection against Denial of Service attacks z IP Packet Filtering
which compliant with IEEE 802.3x standards. z Ethernet port supports Automatic MDI/MDI-X configuration on transceiver.
z QoS z Dynamic DNS
USB Protocols /Interfaces (RW243R4H only)
z UPnP support
z Support USB 2.0 Host port for Samba and file sharing
802.11b/g. The ADSL2+ modem is compatible with the latest
application
Management
ADSL standards, including ADSL2 and ADSL2+, and supports up
z Web-based Configuration
Hardware interface
to 24 Mbps downstream and 1.5 Mbps upstream to deliver true
z Menu-driven Command-line Interpreter
z 1 Power jack
z Telnet Remote Management
z 1 Power switch for power on /off
broadband speed and throughput.
z SNMP v1/v2/Trap
z 1 Reset button for reset to factory default function
z Firmware upgrade through FTP, TFTP and HTTP
z 1 RJ11 phone jacks for ADSL connection
z Configuration backup/restore
z Ethernet jack for LAN port connection
z Diagnostic Tool
z USB port (RW243R4H only)
z TR069 supported (option)
z Un-detachable antenna (2dbi)
54
Mbps
19
RW243R1-X0 (Infinity)
z DMZ support
24 WPS WLAN ADSL2+ ON/OFF
Mbps
1-Port
4-Port
RW243R1
RW243R4 RW243R4H
USB Host RW243R4H
z Wifi ON/OFF button
RW243R1-X0 (Elegent)
z WPS button
RW243R1-X0 (UFO)
Ethernet port
USB 2.0 Wireless Host port 802.11b/g
RW243R1
1
N
Y
RW243R4
4
N
Y
RW243R4H
4
Y
Y 20
ADSL2+
802.11b/g WLAN ADSL2+ Router TW263R4 / TW263R4-DT
G
802.11
802.11b/g WLAN ADSL2+ Router TW263R4 (Infinity) ADSL COMPLIANCE Full-rate ANSI T1.413 Issue 2
Universal Plug and Play (UPnP) support Web-based Graphical User Interface (GUI) enabling
ITU G.992.1 (G.dmt) Annex A or B
end-user device configuration via HTTP
Splitterless ITU G.992.2 (G.lite) specification
Update of boot image or configuration data via TFTP/ FTP
ITU G.994.1 (G.hs)
Syslog
ITU G.992.3 (G.dmt.bis / ADSL2) ITU G.992.5 (ADSL2plus) Supports splitterless ADSL implementation Supports Dying Gasp
WIRELESS 802.11b/g Compliant 802.11g and 802.11b
TW263R4 (Elegant)
2.4 GHz – 2.48GHz frequency range Supports 64/128 bits WEP and WPA
FEATURES IP Alias
54 Mbps wireless operation rate Supports 802.11i (Security)
User Datagram Protocol (UDP) Transmission Control Protocol (TCP)
TW263R4 (Infinity)
ETHERNET INTERFACE
Internet Control Message Protocol (ICMP)
IEEE 802.3
Internet Group Management Protocol (IGMP)
10/100 Mbps
TW263R4-DT (UFO)
PPP over PAP (RFC1334) PPP over CHAP (RFC1994)
Hardware interface
MIB II support (RFC1213)
1 Power jack
Transparent bridging as specified in IEEE 802.1D
1 Power switch for power on /off
Wireless Access Point , ADSL2+ modem, router,
NAT (Network Address Translation)
1 Reset button for reset to factory default function
Dynamic Host Configuration Protocol (DHCP)
4 Ethernet jacks for LAN port connection
four-port switch, it offers quick access to the
Dynamic DNS support
1 RJ11 phone jacks for ADSL connection
Routing Information Protocol (RIP) v1 and v2
1 antenna
The ADSL2+ wireless Router combines 802.11b/g
wired and wireless network.
ATM SUBSYSTEM
The device supports downstream rate up to 12/24 Mbps with capability of ADSL2/ADSL2+, and upstream rate up to 1Mbps.
Detachable Antenna
Environment
PPP over ATM (RFC 2364)
Operating Temperature: 0°C~40°C
Bridged IP over ATM (RFC 1483)
Storage Temperature: 0°C~60°C
PPP over Ethernet (RFC 2516)
Operating Humidity: 10%~85% RH
Multiprotocol Encapsulation over AAL5 (RFC 2684)
Storage Humidity: 10%~90% RH
Supports up to 8 Virtual Channel Connections (VCCs) Supports UBR, CBR, and VBR service classes ATM Forum UNI 3.1/4.0 PVC Support OAM F4/F5 look-back, AIS and RDI OAM cells
54
Mbps
24
Mbps
ADSL2+
MANAGEMENT
4-Port
TFTP client and server DHCP client and server FTP server and client
21
22
ADSL2+
ADSL2+ Router
R243R4 / R243R4U / T263R4 / T263R4U
ADSL2+ Router ADSL COMPLIANCE
MANAGEMENT
z Full-rate ANSI T1.413 Issue 2
z TFTP client and server
z ITU G.992.1 (G.dmt) Annex A or B
z DHCP client and server
z Splitterless ITU G.992.2 (G.lite) specification
z FTP server and client
z ITU G.994.1 (G.hs) z ITU G.992.3 (G.dmt.bis / ADSL2) z ITU G.992.5 (ADSL2plus) z Supports splitterless ADSL implementation z Supports Dying Gasp
R243R4/R4U (Infinity) T263R4/R4U (Infinity)
z Universal Plug and Play (UPnP) support z Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP z Update of boot image or configuration data via TFTP / FTP z Syslog
T263R4/R4U (XB)
z Built-in Diagnostic Tools z SNMP MIB support
ATM SUBSYSTEM z PPP over ATM (RFC 2364)
ETHERNET INTERFACE
z Bridged IP over ATM (RFC 1483)
z IEEE 802.3
z PPP over Ethernet (RFC 2516)
z 10 /100 Mbps
z Multiprotocol Encapsulation over AAL5 (RFC 2684) z Supports up to 8 Virtual Channel Connections (VCCs) z Supports UBR, CBR, and VBR service classes z ATM Forum UNI 3.1 / 4.0 PVC z Support OAM F4 / F5 look-back, AIS and RDI OAM cells
z Ethernet interface supporting up to 64 LAN hosts
USB SLAVE INTERFACE (optional)
T263R4/R4U (SE)
z 1.1 slave interface z Compatible with 2.0 root hubs z Simultaneous operation with Ethernet interface z Driver for WIN 98 / 2000 / ME / XP / Vista / 7
FEATURES z IP Alias z User Datagram Protocol (UDP) z Transmission Control Protocol (TCP)
The ADSL2+ Router compliance to ADSL standards :
z Internet Control Message Protocol (ICMP)
ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite),
z PPP over PAP (RFC1334)
ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus)
z MIB II support (RFC1213)
specification. Both Annex A (ADSL over POTS) and
z NAT (Network Address Translation)
Annex B (ADSL over ISDN) are supported.
z Dynamic DNS support
z Internet Group Management Protocol (IGMP)
z PPP over CHAP (RFC1994)
z Transparent bridging as specified in IEEE 802.1D
z Dynamic Host Configuration Protocol (DHCP)
24
Mbps
ADSL2+
4-Port
USB
Easy Setup
z Routing Information Protocol (RIP) v1 and v2
T263R4/R4U (Infinity) R243R4/R4U (Infinity)
(optional) 23
24
ADSL2+
ADSL2+ Router
R243R1 / R243R1U
24
Mbps
ADSL2+ Router
ADSL2+
1 Port
USB
Easy Setup
R243R1U
ADSL2+ Subsystem
Network Management
z ANSI T1.413 Issue 2
z DSL Forum TR37-compliant autoconfiguration using ILMI to set up access protocols
z G.992.1 Annex A (G.dmt ADSL/POTS) z G.992.1 Annex B (G.dmt ADSL/ISDN)
(e.g., PPPoE, PPPoA) and other settings z AutoDetect feature enabling automatic configuration of VCI/VPI values
z G.992.2 (G.lite)
z SNMPV1, v2C agent and tools
z G.992.3 (ADSL2 G.dmt.bis)
z CLI (Command Line Interface) via serial interface or Telnet over Ethernet or DSL
z G.992.3 (ADSL2 G.dmt.bis)
z Web-based Graphical User Interface (GUI) enabling end-user device configuration via
ATM Subsystem
z Update of boot image or configuration data over TFTP/FTP
HTTP z VC and LLC Multiplexing
z TR069 Remote Management
z 8 of PVC support
z TR-111
z Traffic Shaping (ATM QoS) CBR, VBR-rt, VBR-nrt, UBR
z TR-143
z OAM F4/F5 loop-back
z TR-064
Data Subsystem
VLAN supported
z IP layer
z PVC/Ethernet Port Maping
z User Datagram Protocol (UDP)
z 8 PVID Numbers for PVC/Ethernet
z Transmission Control Protocol (TCP) z Address Resolution Protocol (ARP)
z IGMP Proxy
z Internet Control Message Protocol (ICMP)
z IGMP Snooping
Bridging/Routing Functionality
Firewall
z Transparent bridging as specified in IEEE 802.1D
z Stateful packet inspection (SPI)
z Bridged PDU encapsulation (per RFC 2684)
z NAT/NAPT
z Network Address Translation (NAT)
The R243R1/ R243R1U CPE solution provides full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus performance and
z DOS
-- Provides ALGs to supports most major applications, such as FTP,
z URL Filtering, Domain, MAC and IP filtering
z Dynamic IP address allocation is supported through:
and Ethernet and/or Universal Serial Bus (USB) (option) connection to
z Support 1 Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
-- Internet Protocol Configuration Protocol (IPCP) (per RFC 1332)
z 10/100 Mbps auto selection
-- PPP over ATM (only single-link PPP per VC) -- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516) -- PAP or CHAP for user authentication z Routing Information Protocol (RIP) v1 and v2
R243R1/ R243R1U ADSL2+ Router with full compliance to T1.413 i2,
LAN Protocols / Ethernet interface
-- Dynamic Host Configuration Protocol (DHCP) (per RFC 1541) z Point-to-Point Protocol (PPP)
a host PC or Ethernet hub into a single cost-effective solution.
R243R1/R1U (Sparkling)
z DMZ
-- Provides up to 1024 NAT translation sessions SNMP, ICMP, H.323, L2TP, Quake, MRC, ICQ, and CUSeeMe
combines an “always-on” high speed connection to the telephone line, ne,
Special Application
z Reverse Address Resolution Protocol (RARP)
z IP Multicast IGMP v1/v2/v3
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
USB Protocols /Interfaces (R243R1U only) z Support 1 USB 1.1 slave port
Hardware interface z 1 Power jack z 1 Power switch for power on /off
G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M. R243R1/R1U (Infinity)
Supported Client/Server Applications
z 1 Reset button for reset to factory default function
z FTP and TFTP client/server
z 1 Ethernet jack for LAN port connection
z DHCP client and server
z 1 USB slave port (R243R1U only)
z Telnet server
z 1 RJ11 phone jacks for ADSL connection
z HTTP server
25
26
ADSL2+ Router
ADSL2+ T263R1 / T263R1U
ADSL2+ Router ADSL COMPLIANCE
MANAGEMENT
z Full-rate ANSI T1.413 Issue 2
z TFTP client and server
z ITU G.992.1 (G.dmt) Annex A or B
z DHCP client and server
z Splitterless ITU G.992.2 (G.lite) specification z ITU G.994.1 (G.hs) z ITU G.992.3 (G.dmt.bis / ADSL2) z ITU G.992.5 (ADSL2plus) z Supports splitterless ADSL implementation
T263R1/R1U (Infinity)
z FTP server and client z Universal Plug and Play (UPnP) support z Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP
T263R1/R1U (Sparkling)
z Update of boot image or configuration data via TFTP / FTP
z Supports Dying Gasp
z Syslog
ATM SUBSYSTEM
z SNMP MIB support
z Built-in Diagnostic Tools z PPP over ATM (RFC 2364) z Bridged IP over ATM (RFC 1483) z PPP over Ethernet (RFC 2516) z Multiprotocol Encapsulation over AAL5 (RFC 2684) z Supports up to 8 Virtual Channel Connections (VCCs) z Supports UBR, CBR, and VBR service classes z ATM Forum UNI 3.1 / 4.0 PVC z Support OAM F4 / F5 look-back, AIS and RDI OAM cells
ETHERNET INTERFACE z IEEE 802.3 z 10 /100 Mbps
T263R1U (Elegant)
z Ethernet interface supporting up to 64 LAN hosts
USB SLAVE INTERFACE (optional) z 1.1 slave interface z Compatible with 2.0 root hubs z Simultaneous operation with Ethernet interface z Driver for WIN 98 / 2000 / ME / XP / Vista / 7
FEATURES
T263R1U (UFO)
z IP Alias
The ADSL2+ Router compliance to ADSL standards :
z User Datagram Protocol (UDP) z Transmission Control Protocol (TCP) z Internet Control Message Protocol (ICMP)
ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite),
z Internet Group Management Protocol (IGMP) z PPP over PAP (RFC1334)
ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2plus)
z PPP over CHAP (RFC1994) z MIB II support (RFC1213)
specification. Both Annex A (ADSL over POTS) and
z Transparent bridging as specified in IEEE 802.1D
Annex B (ADSL over ISDN) are supported.
z Dynamic Host Configuration Protocol (DHCP)
z NAT (Network Address Translation)
z Dynamic DNS support z Routing Information Protocol (RIP) v1 and v2
24
Mbps
ADSL2+
1 Port
USB
Easy Setup
T263R1/R1U (Infinity)
T263R1U 27
28
ADSL USB Modem
ADSL USB Modem
G123USB
ADSL USB C802USB
C802USB ADSL Modem is compliant with the full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) ADSL standards, and with the splitterless ITU G.lite (G.992.2) specification. This rate-adaptive solution is designed for Customer C802USB (XB)
Premise Equipment.
8
Mbps
ADSL
8
Mbps
ADSL
C802USB (SE)
Complete USB ADSL modem solution
Easy Setup
Compliant with ADSL standards z Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1) standards z Splitterless ITU G.lite (G.992.2) specification
Easy Setup
DMT modulation and demodulation Full-rate adaptive modem z Maximum downstream rate of 8 Mbps
G123USB ADSL Modem is compliant with the full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1), ADSL2(G.992.3) ADSL standards, and with the splitterless ITU G.lite (G.992.2) specification.
z Maximum upstream rate of 1 Mbps
WAN mode support z PPP over ATM (RFC 2364)
This rate-adaptive solution is designed for Customer Premise Equipment.
z PPP over Ethernet (RFC 2516)
LAN mode support
G123USB (XB)
LAN mode support
z Bridged / routed Ethernet over ATM (RFC 2684 / 1483)
z Bridged/routed Ethernet over ATM
z Classical IP over ATM (RFC 2225 / 1577)
(RFC 2684 / 1483)
Supports “Controllerless” driver model with ATM SAR performed in software
z Classical IP over ATM (RFC 2225 / 1577)
Complete USB ADSL modem solution Compliant with ADSL standards z Full-rate ANSI T1.413 Issue 2 and ITU G.dmt (G.992.1), ADSL2 (G.992.3) standards z Splitterless ITU G.lite (G.992.2) specification
Support for up to 16 PVCs
USB host interface z Compliant with USB Revision 1.1
On-chip support for Dying Gasp DMT modulation and demodulation Full-rate adaptive modem z Maximum downstream rate of 8 Mbps z Maximum upstream rate of 1 Mbps
WAN mode support z PPP over ATM (RFC 2364) z PPP over Ethernet (RFC 2516) 29
Supports “Controller” driver model (USB ADSL Endpoint) using 8 Mb SDRAM
Supports TR-37 Auto Configuration Implementation
z Support for USB 2.0 in legacy mode
USB host interface G123USB (SE) G123
z Bus powered USB device
Operating System Support z Intel Pentium 200Mhz and up, and compatible CPU's support z Support for Windows® Me / 2000 / XP and Vista 32 / 64 bits
z Compliant with USB Specification, Revision 1.1 z Vendor specific descriptors z Bus powered USB device
Operating System Support z Intel Pentium 200Mhz and up, and compatible CPU's support z Support for Windows® 98 / 2000 / XP / Vista 32 bits
Simple and intuitive graphical user interface Software upgrades
Simple and intuitive graphical user interface Software upgrades
30
Powerline WLAN ADSL2+ Router
HomePlug TW263HR3
Powerline WLAN ADSL2+ Router ADSL COMPLIANCE
WIRELESS 802.11b/g
z Full-rate ANSI T1.413 Issue 2
z Support WLAN ON/OFF switch button (Optional)
z Operating Temperature: 0°C~45°C
z ITU G.992.1 (G.dmt) Annex A or B
z Support WLAN WPS switch button (Optional)
z Storage Temperature: 0°C~70°C
z Splitterless ITU G.992.2 (G.lite) specification
z Compliant 802.11g and 802.11b
z Operating Humidity: 10%~85% RH
z ITU G.994.1 (G.hs)
z 2.4 GHz – 2.48 GHz frequency range
z Storage Humidity: 10%~90% RH
z ITU G.992.3 (G.dmt.bis / ADSL2)
z Supports 64/128 bits WEP and WPA
z ITU G.992.5 (ADSL2plus)
z 54 Mbps wireless operation rate
z Supports splitterless ADSL implementation
z Supports 802.11i (Security)
Environment
Dimension :183X127X33mm
z Supports Dying Gasp
ETHERNET INTERFACE ATM SUBSYSTEM
z IEEE 802.3
z PPP over ATM (RFC 2364)
z 10 /100 Mbps
z Bridged IP over ATM (RFC 1483) z PPP over Ethernet (RFC 2516)
POWERLINE INTERFACE
z Multiprotocol Encapsulation over AAL5 (RFC 2684)
z 128-bits DES encryption
z Supports up to 8 Virtual Channel Connections (VCCs)
z Data rate: up to 200Mbps
z Supports UBR, CBR, and VBR service classes
z Compliant with HomePlug® AV specification
z ATM Forum UNI 3.1 / 4.0 PVC
z Frequency band: 4.3 MHz – 20.9 MHz
z Support OAM F4 / F5 look-back, AIS and RDI OAM cells
Hardware interface FEATURES z IP Alias z User Datagram Protocol (UDP)
54
Mbps
200 Mbps
24
Mbps
ADSL2+
z Transmission Control Protocol (TCP)
3-Port
The Powerline WLAN ADSL2+ Router compliance to supported ADSL standards : ANSI T1.413 Issue 2, ITU-T G.992.1 (G.dmt), ITU-T G.992.2 (G.lite), ITU-T G.992.3 (G.dmt.bis/ADSL2), and ITU-T G.992.5 (ADSL2+) specification. Both Annex A (ADSL over POTS) and Annex B (ADSL over ISDN) are supported.
AV
200 Mbps
z Internet Control Message Protocol (ICMP) z Internet Group Management Protocol (IGMP) z PPP over PAP (RFC1334)
z 1 Power jack z 1 Network ID button z 1 Reset button for reset to factory default function z 3 Ethernet jacks for LAN port connection z 1 RJ11 phone jacks for ADSL connection z 1 antenna
ww w ww w w
z PPP over CHAP (RFC1994) z MIB II support (RFC1213) z Transparent bridging as specified in IEEE 802.1D z NAT (Network Address Translation) z Dynamic Host Configuration Protocol (DHCP) z Dynamic DNS support RJ45 Cable
z Routing Information Protocol (RIP) v1 and v2
LAN 1
Network ID
MANAGEMENT z TFTP client and server
LAN 2
LAN 3
ADSL
Reset
e Powerline adaptorr Power cord
RJ11 cable
z DHCP client and server
This products use existing AC electrical wiring as a physical medium for broadband networking based on the HomePlug AV standard. The HomePlug AV standard supports data rates up to 200 Mbps.
z FTP server and client Po Power line
z Universal Plug and Play (UPnP) support
Power Socket
z Web-based Graphical User Interface (GUI) enabling
RJ11 socket
end-user device configuration via HTTP z Update of boot image or configuration data via TFTP / FTP
The TW263HR3 also combines 802.11b/g Wireless Access Point , it offers quick access to the wireless network. 31
ISDN Phone
z Syslog
TW263HR3
z Built-in Diagnostic Tools z SNMP MIB support
Powerline
Ethernet cable
32
200Mbps Powerline Ethernet Adapter I204H1-V1 / I204H1-V2 / I204HP1-V0
HomePlug
200Mbps Powerline Ethernet Adapter
AV
200 Mbps
FEATURES & SPECIFICATIONS z Standard : HomePlug AV Specification compliant z Speed : up to 200 Mbps z Modulation : Supports OFDM, 1024 / 256 / 64 / 16 / 8 QAM,
l204HP1-V0
QPSK, BPSK, and ROBO modulation schemes z Frequency : 4.3 MHz ~ 20.9 MHz z Security : 128-bits AES encryption z Support IGMP managed multicast IP transmission z IEEE 802.3, 802.3u 10/100M Ethernet standard
LED indicators :
z With extended power socket (I204HP1-V0 only) z Power source : 100V / 240V AC, 50~60 HZ z Environment : 0 ~ 50 °C
PWR
PWR--- Power LED
PLC
PL-ACT---Powerline Activity LED
ETH
ETH---LAN Link / Activity LED
Network Netw Net work Solution Solu ution
The best solution for no-new-wire networking in the house or office.
Room A
l204H1-V1
Room B
I204H1-V1
providing up to 200Mbps data speed over the existing
I204HP1-V0
household power supply. This Product is cost-effective,
NB
Room mD
Int
ne t er
The I204H1 operates on HomePlug AV standard,
WWW W
Room C
easy to create a home network without spending time and money to run expensive CAT-5 cabling. I204H1 is the best solution for no-new-wire networking in the
I204H1-V2 4H H1-V2 H 1 V2
Phone Jack
house or office. IN204D3-V0
Router R t
l204H1-V2 Ethernet cable
33
Powerline
34
200Mbps Powerline Desktop Ethernet AP Router IN204D3
200Mbps Powerline Desktop Ethernet AP Router FEATURES & SPECIFICATIONS of Homeplug
FEATURES & SPECIFICATIONS of Network and Management
z Chipset solution : Intellon INT6400
WAN IP Assignment
z Standard : HomePlug AV Specification compliant
z Static IP
z Speed : up to 200 Mbps
z DHCP client
z Modulation : Supports OFDM, 1024/256/64/16/8 QAM,
z PPPoE client
QPSK, BPSK, and ROBO modulation schemes z Frequency : 4.3 MHz ~ 20.9 MHz
Configuration
z Security : 128-bits AES encryption
z Web Browser
z Support IGMP managed multicast IP transmission
z Windows base Easy setup program
z IEEE 802.3, 802.3u 10/100M Ethernet standard z Power source : 100V / 240V AC, 50~60 HZ
WAN Protocols /Interfaces
z With extended power socket
z Ethernet interface z Support 1 Port Ethernet Interface which compliant with IEEE 802.3x standards.
FEATURES & SPECIFICATIONS of Wireless
z 10/100 Mbps auto selection
z IEEE 802.11n compliance. Backwards compatible with
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
802.11b/g
The best solution for no-new-wire re 200 e. Mbps networking in the house or office.
n
LAN Protocols /Interfaces
z Support Wifi WPS switch button
z Ethernet interface
z 802.11n (40MHz): Up to 300Mbps
z Support 3 Ports Ethernet Interface which compliant with IEEE 802.3x standards.
z 802.11n (20MHz): Up to 150Mbps
z 10/100 Mbps auto selection
z Supports 802.11g data rates of up to 54 Mbps with
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps
Netw Net Network work Solu Solution ution
z Supports long and short preamble modes z Compliant transmit modulation accuracy and transmit power
802.11
spectral density
Room A
Room B
z IEEE 802.11i Security supports 64/128-bits WEP, WPA,
ne t er
WPA2, WPS and WDS z MAC Address Filter
The IN204DP3 operates on HomePlug AV and IEEE
I204H1-V1
z Multi-SSID z IEEE 802.11e QoS enhancement (WMM)
ps 802.11b/g/n 2T2R MIMO standard, providing up to 200Mbps d data speed over the existing household power supply and
Operating Frequency /Channel z USA (FCC) 11 Channels: 2.412GHz ~ 2.462GHz
up to 300Mbps wireless connection rate. This Product is
I204HP1-V0
Room mD
Room C
z Japan 14 channels: 2.412GHz ~ 2.484GHz
I204H1-V2 4H H1-V2 H 1 V2
Phone Jack
g. spending time and money to run expensive CAT-5 cabling. It is the best solution for no-new-wire networking in the
IN204D3-V0
Router R t
IN204D3 Ethernet cable
35
WWW W
z Europe (ETSI) 13 Channels: 2.412GHz ~ 2.472GHz
cost-effective, easy to create a home network without
house or office.
NB
Int
AV
z Support Wifi ON/OFF switch button
Powerline
36
5-Port 10/100/1000 Mbps Gigabit Ethernet Switch
8-Port 10/100/1000 Mbps Gigabit Ethernet Switch
RE5PG
The switch is an easy installation 5-port Gigabit Ethernet switch
Plug
with high performance ance and co competitive ompetitive price.
Play
&
5
It's a perfect way to o extend d yo you your ur network e o k struc structure. u e.
Ports
10/100 Mpbs
1000 Mpbs
Full Duplex
Switch RE8PG
8
Auto MDIX
Ports
The switch is an easy installation 8-port Gigabit Ethernet sw switch witch with high performance and competitive price. It's a perfect way to extend your network structure. Features z Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX,IEEE802.3ab 1000Base-T specifications z 8 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch z Auto negotiation of speed (10/100/1000Mbps), and duplex mode. Note that 1000Mbps supports only full duplex mode z Supports TP interface Auto MDIX function for auto TX/RX swap
RE5PG (Infinity)
z Support Jumbo frame z Supports Store & Forward architecture and performs forwarding and
Features
filtering
z Compliant with the IEEE802.3 10Base-T Ethernet, IEEE802.3u
z Broadcast Storming Filter function
100Base-TX,IEEE802.3ab 1000Base-T specifications
z IEEE802.3x flow control for Full-duplex
z 5 port 10/100/1000Mbps TX Auto-Negotiation Ethernet Switch z Auto negotiation of speed (10/100/1000Mbps), and duplex mode. Note that 1000Mbps supports only full duplex mode z Supports TP interface Auto MDIX function for auto TX/RX swap z Automatic Source MAC Address Learning and Aging z Support Jumbo frame
and filtering
z Network Media:
z LED indicators for simple diagnostics and management
z Network Media:
z Plug and Play
10BASE –T: UTP Cat. 3 orr up,
z Green Ethernet
RE5PG (Elegant)
z LED Indicators: Power, Link/Activity
z LED indicators for simple diagnostics and management
z Power：5W（max）
z Plug and Play
z Dimension: 115mm(L) x 91mm(W) x 30mm(H)
z Chip：RTL8366S
z Weight: 170g
z Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
z Temperature: 0° to 40° C (operating), -20° to 70° C (storage)
Play
10/100 Mpbs
z Humidity: 10% to 85% non-condensing (operating),
1000 Mpbs
Full Duplex
Auto MDIX
100BASE-TX/1000Base-T: UTP Cat. 5 or up z Transmission Method: Store and Forward
10M/100M (Half-duplex), 10M/100M/1000Mbps (Full-duplex)
z Auto MDI/MDIX: Yes
&
10BASE –T: UTP Cat. 3 or up,
z Data Transfer Rate:
z Transmission Method: Store re and Forward
z Supports to handle up to 1522 bytes packet
Plug 37
z Supports to handle up to 1522 bytes packet
z Back Pressure function for 10/100Mbps Half-duplex operation
z Green Ethernet
IEEE802.3ab 1000Base-T, IEEE 802.3x Flow Control
z Access Method: CSMA/CD D
10M/100M/1000Mbps (Full-duplex)
IEEE802.3ab 1000Base-T, IEEE 802.3x Flow Control
IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX,
Specifications
10M/100M (Half-duplex),
z IEEE802.3x flow control for Full-duplex
z Chip：RTL8368S+RTL8214 z Standards:
z Access Method: CSMA/CD
z Data Transfer Rate:
z Broadcast Storming Filter function
Specifications
z Back Pressure function for 10/100Mbps Half-duplex operation
100BASE-TX/1000Base-T: UTP Cat. 5 or up
z Supports Store & Forward architecture and performs forwarding
RE8PG
z Automatic Source MAC Address Learning and Aging
5% to 90% non-condensing (storage)
z Auto MDI/MDIX: Yes z LED Indicators: Power, Link/Activity z Power：7.5W（max） z Dimension: 159mm(L) x 93mm(W) x30mm(H) z Weight: 240g z Temperature: 0° to 40° C (operating), -20° to 70° C (storage) z Humidity: 10% to 85 % non-condensing (operating), 5% to 90% non-condensing (storage) z Certifications: FCC Part 15 Class A, CE Mark, VCCI z Power Adaptor: Input AC 100~240V output DC 5V 1A
z Certifications: FCC Part 15 Class A, CE Mark, VCCI z Power Adaptor: Input AC 100~240V output DC 5V 1A 38
IAD
Superior IAD RN243VR4H-2SO / RN243VR4-2SO / RN243VR4-2S
Superior IAD
The RN243VR4 CPE IAD solution provides VoIP, WLAN 802.11n (MIMO 2T2R) and full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus performance and combines an “always-on” high speed connection to the telephone line, and Ethernet connection to a host PC or Ethernet hub into a single cost-effective solution. RN243VR4 IAD Router with full compliance to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL.
300 WPS WLAN 2T2R VoIP 24 Mbps ADSL2+ ON/OFF
Voice FEATURES
Management
z Support for SIP protocols
z Web-based Configuration
z Telephony functions (call waiting, call hold, call forward)
z Menu-driven Command-line Interpreter
z Echo cancellation (G.168) – configurable
z Telnet Remote Management
z Silence suppression (Voice Activity Detection (VAD) and Comfort Noise
z SNMP v1/v2/Trap
Generation (CNG) z FAX - T.38 relay and G.711 pass through
SIP voice protocol and 802.11n wireless lan standard.
IEEE802.11n PHY rate 300
IEEE802.11n
Mbps
54
IEEE802.11g
z Incoming and outgoing calls can be routed over PSTN
n
(for RN243VR4-2SO only) z Soft relay support to handle connections between the FXS and FXO ports (for RN243VR4-2SO only) z Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in
802.11
Mbps
IEEE802.11b
RN243VR4-2SO
z Diagnostic Tool z TR069 supported (option)
Wireless Standard z IEEE 802.11n (MINO 2T2R) compliance. Backwards compatible with 802.11b/g z Support Wifi ON/OFF switch button z Support Wifi WPS switch button z Support 802.11n (MIMO 2T2R): Up to 300Mbps
z RFC-1577 Classical IP over ATM
USB Host
z Configuration backup/restore
(for RN243VR4-2SO only)
z RFC-1483/2684 LLC/VC-Mux bridged/routed mode
Mbps
4-Port
z Firmware upgrade through FTP, TFTP and HTTP
the event of power failure or loss of the Internet connection
Software Features
11
Mbps
z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps
z RFC-2516 PPPoE
z Supports long and short preamble modes
z RFC-2364 PPPoA
z Compliant transmit modulation accuracy and transmit power spectral density
z ITU-T 1.610 F4/F5 OAM send and receive loop-back
z IEEE 802.11i Security supports 64/128-bits WEP, WPA,WPA2, WPS and WDS
z 802.1d Spanning-Tree Protocol
z MAC Address Filter
z DHCP Client/Server/Relay
z Multi-SSID
z NAT
z IEEE 802.11e QoS enhancement (WMM)
z RIP v1/v2 z DNS Relay Agent
Ethernet LAN Protocols /Interfaces
z DMZ support
z Support 4 ports Ethernet Interface 10/100 Mbps auto selection which compliant
z IGMP Proxy/Snooping z Stateful Packet Inspection
with IEEE 802.3x standards. z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
z Protection against Denial of Service attacks z IP Packet Filtering
Hardware interface
z QoS
z 1 Power jack
z Dynamic DNS
z 1 Power switch for power on /off
z UPnP support
z 1 Reset button for reset to factory default function
ADSL Standard
z Un-detachable antenna x 2 (MIMO 2T2R)
z ANSI T1.413 Issue 2
z 1 RJ11 phone jack for VOIP FXO connection (RN243VR4-2SO / RN243VR4H-2SO only)
z G.994.1 (G.hs)
z 2 RJ11 phone jacks for VOIP FXS 2 ports connection
z Auto-negotiating rate adaptation
z 1 Wifi ON/OFF button
z ADSL2 G.dmt.bis (G.992.3)
z 1 WPS button
z ADSL2 G.lite.bis (G.992.4) z ADSL2+ (G.992.5) 39
z 4 Ethernet Jack for LAN port connection
z ITU-T G.992.1(G.dmt) z G.992.2 (G.lite)
RN243VR4H-2SO
z 1 RJ11 phone jack for ADSL connection
z 1 USB 2.0 Host (RN243VR4H-2SO only) 40
Advance IAD with Host-USB interface CW243VR4H-2SO
IAD
Advance IAD with Host-USB interface Voice features z Support for SIP protocols z Telephony functions (call waiting, call hold, call forward) PHONE 2
PHONE 1
z Echo cancellation (G.168) – configurable z Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation ation (CNG) z FAX - T.38 relay and G.711 pass through z Incoming and outgoing calls can be routed over VoIP z Incoming and outgoing calls can be routed over PSTN z Soft relay support to handle connections between the FXS and FXO ports z Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in the event of power failure or loss of the Internet connection
Wireless LAN 802.11b/g z Support WLAN ON/OFF switch button
LAN Protocols / Ethernet Interfaces
z Support WLAN WPS switch button
z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with
z Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem functions z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps
IEEE 802.3x standards. z 10/100 Mbps auto selection z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and 1 Mbps z Supports 64 and 128-bit WEP, WPA, and WPA2, WPS
USB Protocol /Interface z Support 1 port USB compliant USB 2.0 Host z SAMBA server application
The CW243VR4H CPE IAD solution provides VoIP, WLAN 802.11b/g g and full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus DSL2/ADSL2plus performance and combines an “always-on” high speed connection ction to the
G
802.11
telephone line, and Ethernet connection to a host PC or Ethernett hub into a single cost-effective solution. CW243VR4H IAD Router with full c compliance ompliance
and G.992.5 (ADSL2plus), and support for Annexes A, B and M forr
Mbps
USB Host
24
ADSL2+ VoIP Mbps
4-Port
z 1 Power jack
z Supports RFC1483 Route and RFC1483 Bridge
z 1 Power switch for power on /off
z Point-to-Point Protocol (PPP)
z 1 Reset button for reset to factory default function
-- PPP over ATM (only single-link PPP per VC)
z 4 Ethernet jacks for LAN port connection
-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)
z 1 RJ11 phone jacks for ADSL connection
-- PAP or CHAP for user authentication
z 1 USB 2.0 Host
Network Management
z 1 RJ11 phone jack for VOIP FXO connection
z Web-based Graphical User Interface (GUI) enabling end-user device
z 2 RJ11 phone jacks for VOIP FXS 2 ports connection z 1 WLAN ON/OFF button
z CD-ROM easy setup program
z 1 WLAN WPS button
Firewall Security
Environment
z Stateful packet inspection (SPI)
z Operating Temperature: 0°C~40°C
z NAT/NAPT
z Storage Temperature: 0°C~60°C
z DMZ
z Operating Humidity: 10%~85% RH
z DOS
z Storage Humidity: 10%~90% RH
z Common types of Attacks
CW243VR4H-2SO 41
Hardware interface
z Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)
configuration via HTTP
DSL. SIP voice protocol and 802.11b/g wireless lan standard.
WPS WLAN ON/OFF
z DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection
z 1 antenna
to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2),
54
ADSL2+ features
z MAC and IP level packet filtering
Dimension :183X127X33mm 42
IAD
Optimize IAD
CW243VR4-2SO / CW243VR4-2S
Optimize IAD
G
Voice features
802.11
z Support for SIP protocols z Telephony functions (call waiting, call hold, call forward)
POWER
LAN 4
LAN 3
LAN 2
LAN 1
RESET
ADSL
PSTN
PHONE 2
PHONE 1
z Echo cancellation (G.168) – configurable z Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation eneration (CNG) z FAX - T.38 relay and G.711 pass through (for CW243VR4-2SO only)
z Incoming and outgoing calls can be routed over PSTN (for CW243VR4-2SO only) z Soft relay support to handle connections between the FXS and FXO ports (for CW243VR4-2SO only) z Hard ‘fail-safe’ relay to connect the FXS port directly to the FXO port in the event of power failure or loss of the Internet connection (for CW243VR4-2SO only)
Wireless LAN 802.11b/g z Support WLAN ON/OFF switch button z Support WLAN WPS switch button z Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem functions z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to
CW243VR4-2SO
48, 36, 24,18, 12, 9, and 6 Mbps z Supports 802.11b data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps
The
CW243VR4 CPE IAD solution provides VoIP, WLAN
802.11b/g and full Ethernet bridge and router functionality and proven ADSL/ADSL2/ADSL2plus performance and combines an “always-on” high speed connection to the telephone line, and Ethernet connection to a host PC or Ethernet hub into a single cost-effective solution. HCW243VR4 IAD Router with full compliance to T1.413 i2, G.992.1, G.992.2 (G.lite), G.992.3
LAN Protocols / Ethernet Interfaces z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards. z 10/100 Mbps auto selection
z Supports 64 and 128-bit WEP, WPA, and WPA2, WPS
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
ADSL2+ features
Hardware interface
z DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection
z 1 Power jack
z Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)
z 1 Power switch for power on /off
z Supports RFC1483 Route and RFC1483 Bridge
z 1 Reset button for reset to factory default function
z Point-to-Point Protocol (PPP)
z 4 Ethernet jacks for LAN port connection
-- PPP over ATM (only single-link PPP per VC)
z 1 RJ11 phone jacks for ADSL connection
-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)
z 1 antenna
-- PAP or CHAP for user authentication
z 1 RJ11 phone jack for VOIP FXO connection (for CW243VR4-2SO only) z 2 RJ11 phone jacks for VOIP FXS 2 ports connection
(G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL. SIP voice protocol and 802.11b/g
Network Management
z 1 WLAN ON/OFF button
z Web-based Graphical User Interface (GUI) enabling end-user device
z 1 WLAN WPS button
configuration via HTTP z CD-ROM easy setup program
wireless lan standard.
Environment z Operating Temperature: 0°C~40°C
54
Mbps
24 WPS WLAN ADSL2+ VoIP ON/OFF Mbps
4-Port
Firewall Security
z Storage Temperature: 0°C~60°C
z Stateful packet inspection (SPI)
z Operating Humidity: 10%~85% RH
z NAT/NAPT
z Storage Humidity: 10%~90% RH
z DMZ z DOS
Dimension :183X127X33mm
z Common types of Attacks 43
z MAC and IP level packet filtering
44
Basic IAD
IAD C243VR1-1S
Basic IAD Voice features z Support for SIP protocols z Telephony functions (call waiting, call hold, call forward) z Echo cancellation (G.168) – configurable z Silence suppression (Voice Activity Detection (VAD) and Comfort Noise Generation (CNG) z FAX - T.38 relay and G.711 pass through
ADSL2+ features z DMT: T1.413, G.992.1, G.992.2, G.992.3, G.992.5 with auto-detection z Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE) z Supports RFC1483 Route and RFC1483 Bridge z Point-to-Point Protocol (PPP)
Hardware interface
-- PPP over ATM (only single-link PPP per VC)
z 1 Power jack
-- PPP over Ethernet encapsulation over the virtual interface (per RFC 2516)
z 1 Reset button for reset to factory default function
-- PAP or CHAP for user authentication
z 1 Ethernet jacks for LAN port connection z 1 RJ11 phone jacks for ADSL connection
Network Management
z 1 RJ11 phone jacks for VOIP FXS 1 port connection
z Web-based Graphical User Interface (GUI) enabling end-user device configuration via HTTP z CD-rom easy setup program
Environment zOperating Temperature: 0°C~40°C zStorage Temperature: 0°C~60°C
24
Mbps
ADSL2+
1-Port
VoIP
Easy Setup
Security Firewall
zOperating Humidity: 10%~85% RH
z Stateful packet inspection (SPI)
zStorage Humidity: 10%~90% RH
z NAT/NAPT z DMZ
Dimension:132X90X30mm
z DOS z Common types of Attacks
The C243VR1 CPE IAD solution provides VoIP and full Ethernet bridge and
z MAC and IP level packet filtering
router functionality and proven ADSL/ADSL2/ADSL2plus performance and LAN Protocols / Ethernet Interfaces
combines an “always-on” high speed connection to the telephone line,
Ethernet interface
and Ethernet connection to a host PC or Ethernet hub into a single
z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
cost-effective solution. C243VR1 IAD Router with full compliance to T1.413 i2,
z 10/100 Mbps auto selection
G.992.1, G.992.2 (G.lite), G.992.3 (G.dmt.bis/ADSL2), and G.992.5 (ADSL2plus), and support for Annexes A, B and M for DSL. SIP voice protocol standard.
45
z Ethernet port supports Automatic MDI/MDI-X configuration transceiver.
C243VR1-1S
46
VoIP
802.11b/g WLAN VoIP Gateway RE54VR4-2S
G
802.11
802.11b/g WLAN VoIP Gateway
54
Mbps
WPS WLAN ON/OFF
4-Port
VoIP
Network Protocol
NAT Traversal
Environment :
z SIP protocol RFC3261
z STUN (Simple Traversal UDP through NAT)
z Operating Temperature: 0°C~40°C
Codec
Configuration
z Operating Humidity: 10%~85% RH
z G.711: 64k bit/s (PCM)
z Web Browser
z Storage Humidity: 10%~90% RH
z G.723.1: 6.3k / 5.3k bit/s
z Windows base Easy setup program
z Storage Temperature: 0°C~60°C
Dimension : 183X127X33mm
z G.726: 16k / 24k / 32k / 40k bit/s (ADPCM) z G.729A: 8k bit/s (CS-ACELP)
Auto provisioning
z G.729B: adds VAD & CNG to G.729
z HTTP
Voice Quality
Fax modes
z VAD: Voice activity detection
z T.38 relay support
z CNG: Comfortable noise generator
z G.711 pass through
z LEC: Line echo canceller
RE54VR4-2S
-- G.165, G.168 compliant
WAN/LAN Protocols / Interfaces
-- Echo canceller for each port
z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
Wireless LAN 802.11b/g z Fully integrated IEEE 802.11g-compliant MAC, baseband, and modem functions z Supports 802.11g data rates of up to 54 Mbps with automatic fallback to 48, 36, 24,18, 12, 9, and 6 Mbps z Supports 802.1lb data rates of up to 11 Mbps with automatic fallback to 5.5, 2, and1 Mbps
Call Function
z 10/100 Mbps auto selection
z Call Hold
z Ethernet port supports Automatic MDI/MDI-X
z Call Waiting
z Call Transfer
LAN Protocols /Interfaces
z Caller ID
z Ethernet interface
z 3-ways conference
z Support 4 Ports Ethernet Interface (10/100Mbps)
DTMF Function
z 10/100 Mbps auto selection
z RFC2833
z Ethernet ports support Automatic MDI/MDI-X
which compliant with IEEE 802.3x standards.
z OFDM modulation with full-duplex MAC and half-duplex baseband z DBPSK, DQPSK and CCK modulation with full-duplex MAC and half-duplex base-band (BB) z Multiple radio interfaces z Supports long and short preamble modes z Resistant to adjacent channel and co-channel interference
z In-Band DTMF
z Fully parameterized AGC design allows flexibility to interface to a variety of RF analog front end devices z Supports 64 and 128-bit WEP, WPA, and WPA2,
z SIP Info
-- AP + Client mode support
Hardware interfaces z 1 Power jack
IP Assignment
z 1 Power switch for power on /off
z Static IP
z 1 Reset button for reset to factory default function
z DHCP client
z 1 Ethernet jack for WAN port connection
z PPPoE client
z 4 Ethernet jack for LAN ports connection z 2 RJ11 phone jacks for VOIP FXS connection
-- WDS support -- AP mode support
configuration transceiver.
z Out-of Band DTMF
z Compliant transmit modulation accuracy and transmit power spectral density
configuration transceiver.
z Call Forward
QoS
z 1 External antenna
z ToS field
-- Client mode support 47
48
VoIP
VoIP ATA
5VA Series CVA Series
VoIP
VoIP ATA
Easy Setup Phone Function
Auto provisioning
z Volume Adjustment
z HTTP
z Ethernet interface
z Speed dial key
z TFTP
z Support 1 Port Ethernet Interface
z Phone book z Hook Flash
IP Assignment
(10/100Mbps) which compliant with
Fax modes
IEEE 802.3x standards.
z T.38 relay support
z 10/100 Mbps auto selection
z G.711 pass through
z Ethernet port supports Automatic
z Static IP
5VA Series CVA Series
MDI/MDI-X configuration
z DHCP client
Models and hardware interfaces
z PPPoE client
1S z 1 Power jack for DC input
5VA-1SP (Sparkling)
transceiver.
WAN Protocols /Interfaces
Network Protocol
Call Function
Security
z 1 Power switch for power on /off
z Ethernet interface
z SIP v1 (RFC2543), v2 (RFC3261)
z Call Hold
z HTTP 1.1 basic/digest
z 1 Reset button for reset to factory default function
z Support 1 Port Ethernet Interface
z IP/TCP/UDP/RTP/RTCP
z Call Waiting
z IP/ICMP/ARP/RARP/SNTP
z Call Forward
z TFTP Client/DHCP Client/ PPPoE Client
z Call Transfer
authentication for Web setup z MD5 for SIP authentication
z 2 Ethernet jacks for LAN and WAN port connection z 1 RJ11 phone jack for VOIP FXS connection
(10/100Mbps) which compliant with IEEE 802.3x standards. z 10/100 Mbps auto selection
(RFC2069/ RFC 2617)
z Telnet/HTTP Server
z Caller ID
z DNS Client
z 3-ways conference
QoS
z 1 Power jack for DC input
MDI/MDI-X configuration
z NAT/DHCP Server
z Toll-Bypass (Auto Answer)
z ToS field
z 1 Power switch for power on /off
transceiver.
z Diff serv
z 1 Reset button for reset to factory default function
z PPTP client z VLAN
1SP
DTMF Function
z Ethernet ports support Automatic
z 2 Ethernet jacks for LAN and WAN port connection
Environment
z RFC2833
NAT Traversal
z 1 RJ11 phone jack for VOIP FXS connection
zOperating Temperature: 0°C~40°C
Codec
z In-Band DTMF
z STUN (Simple Traversal UDP
z 1 RJ11 phone jack for PSTN backup
zStorage Temperature: 0°C~60°C
z G.711: 64k bit/s (PCM)
z Out-of Band DTMF
z G.723.1: 6.3k / 5.3k bit/s
z SIP Info
z G.726: 16k / 24k / 32k / 40k bit/s (ADPCM)
zOperating Humidity: 10%~85% RH
through NAT) 1SO
Configuration
z 1 Power jack for DC input
z G.729A: 8k bit/s (CS-ACELP)
SIP Server
z Web Browser
z 1 Power switch for power on /off
z G.729B: adds VAD & CNG to G.729
z Registrar Server
z Console/Telne
z 1 Reset button for reset to factory default function
z GSM
z Outbound Proxy
z Windows base Easy setup
z 2 Ethernet jacks for LAN and WAN port connection
z iLBC
program
Tones
FXO
Remark
1
1
2S
1
1
2
1SO
1
1
1
1
FXO
1SP
1
1
1
1
PSTN Backup
z Ring Back Tone
z TFTP
2S
z Dial Tone
z Console
z 1 Power jack for DC input
z LEC: Line echo canceller
z Busy Tone
z HTTP
z 1 Power switch for power on /off
z Packet Loss Compensation
FXS
1
z CNG: Comfortable noise generator
z Programming Tone
LAN
1S
z VAD: Voice activity detection
-- Echo canceller for each port
WAN
z 1 RJ11 phone jack for FXO
Firmware Upgrade
-- G.165, G.168 compliant
zStorage Humidity: 10%~90% RH
z 1 phone jack for VOIP FXS connection
z Ring Tone
Voice Quality
5VA-2S (Infinity)
LAN Protocols /Interfaces
z 1 Reset button for reset to factory default function z 2 Ethernet jacks for LAN and WAN port connection z 2 RJ11 phone jacks for VOIP FXS connection
z Adaptive Jitter Buffer 49
50
VoIP Phone Call
SIP
CVP-1S
VoIP Phone
Easy Setup
PC
Phone Function
Ethernet Cable
z Volume Adjustment z Speed dial key z Phone book z Hook Flash
LAN Protocols /Interfaces z Ethernet interface z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
IP Assignment z Static IP z DHCP client
CVP-1S CVP Call Function
z SIP v1 (RFC2543), v2 (RFC3261)
z Call Hold
z IP/TCP/UDP/RTP/RTCP
z Call Waiting
z IP/ICMP/ARP/RARP/SNTP
z Call Forward
z TFTP Client/DHCP Client/ PPPoE Client
z Call Transfer
z Telnet/HTTP Server
z Caller ID
z DNS Client
z 3-ways conference
z NAT/DHCP Server
z Toll-Bypass (Auto Answer)
z PPTP client z VLAN
z MD5 for SIP authentication (RFC2069/ RFC 2617)
QoS z ToS field
z In-Band DTMF
z G.711: 64k bit/s (PCM)
z Out-of Band DTMF
z G.723.1: 6.3k / 5.3k bit/s
z SIP Info
z Ethernet interface
xDSL / Cable Modem
z Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards.
z Ethernet ports support Automatic MDI/MDI-X configuration transceiver.
z Diff serv
Hardware interface NAT Traversal z STUN (Simple Traversal UDP through NAT)
Codec
configuration transceiver.
z 10/100 Mbps auto selection
z LAN port: 1x RJ45
Internet
z WAN port: 1 x RJ45 z LCD display: 2x16 characters
DTMF Function z RFC2833
z Ethernet port supports Automatic MDI/MDI-X
WAN Protocols /Interfaces
z HTTP 1.1 basic/digest authentication for Web setup
VoIP Phone
z 10/100 Mbps auto selection
z PPPoE client
Security Network Protocol
Ethernet Cable
VoIP
VoIP
Configuration z Web Browser z Console/Telne z Windows base Easy setup program
z Phone case: 27-button keypads z LED lights: LEDs for SIP, LAN and WAN connection indicator z Power port: DC 7.5V 600mA
z G.726: 16k / 24k / 32k / 40k bit/s (ADPCM) z G.729A: 8k bit/s (CS-ACELP)
SIP Server
z G.729B: adds VAD & CNG to G.729
z Registrar Server
z GSM
z Outbound Proxy
z iLBC (option)
Firmware Upgrade z TFTP z Console z HTTP
Tones Voice Quality
z Ring Tone
z VAD: Voice activity detection
z Ring Back Tone
z CNG: Comfortable noise generator
z Dial Tone
z LEC: Line echo canceller
z Busy Tone
-- G.165, G.168 compliant
Auto provisioning z HTTP z TFTP
z Programming Tone
-- Echo canceller for each port z Packet Loss Compensation z Adaptive Jitter Buffer 51
52
PCI 56K V.92 Modem
USB 56K V.92 Modem
AS560PCI/AC560PCI/CS560PCI
AS560USB
56K
GENERAL DESCRIPTION z Integrated PCI interface z Operating System Support Windows 98 / 2000 / ME / XP / NT / Vista / 7 z Host-based Controller utilizing PC host CPU (Pentium*) z V.92 and V.90 technology allow data to be received at speed up to 56 Kbps from a digitally connected central site modem. Modem on Hook (MoH), fast connection, PCM upstream 48 kbits /s also supported. z Support Fax Class 1 send and receive rates up to 14400 bps. z Telephone Answering Machine (TAM) Function enabled with sound card z V.42 LAPM and MNP error correction.
AS560PCI (use Agere solution)
z V.44, V.42 bis and MNP 5 data Compression z Communication software compatible AT command set.
DATA
DATA MODEM z V.92, V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22 A/B, V.23,V.21, Bell 212A and Bell 103. z Received data from a digital source using V.92 or V.90 compatible central site
DATA
FAX
VOICE TAM
FAX
TAM
56 Kbps
56 Kbps
FAX MODEM
modem over the digital telephone network portion of the PSTN at line speeds up
GENERAL DESCRIPTION
to 56 Kbps with automatic fall-back depends on line condition.
z Use AGERE Olympia SV92U2 / 1040 chipset solution
z ITU-T V.17, V.29, V.27ter and 21 channel 2.
z USB bus Powered/ system Powered
z TIA / EIA 578 Class 1 FAX send and receive
FAX MODEM
z USB ver.2.0 supports as an optional under Windows XP / Windows 2000
z ITU-T V.17, V.29, V.27 ter and V.21 channel 2 .
and Windows 2003 server.
z TIA/EIA 578 Class 1 FAX send and receive speeds of 14400, 12000, 9600, 7200,
z Windows 2000 / ME / XP / Vista / 7 and Windows Server 2003 operation
4800 or 2400 bps.
supports z Pentium Host-based Controller / CPU required
VOICE/AUDIO MODE
z V.92 and V.90 technology present Receiving Data Rate up to 56Kbps,
z TAM through the microphone and speaker interface of sound card
ERROR CORRECTION
VOICE
from a digitally connected central site modem.
CS560PCI (use Conexant solution)
z Support V.42 LAPM, MNP 2-4
z Modem on Hook (MoH), Fast connection, PCM upstream 48Kbps supported. z Fax Class 1 modem supported, up to 14.4Kbps Data transmission / Receiving rate.
DATA COMPRESSION
z Telephone Answering Machine (TAM) Functional via Audio Sound device
z Support V.44, V.42 bis and MNP 5
z V.42 LAPM and MNP error correction. z V.44, V.42, V.42bis and MNP 5 data Compression
DIALING TYPE
z AT command set compatible
z Tone or Pulse dialing.
DATA MODEM
FLOW CONTROL
z V.92, V.90, V.34bis, V.34, V.32bis, V.32, V.22bis, V.22 A/B, V.23, V.21,
z Both transmit and receive fax data are buffered within the Modem .
Bell 212A, and Bell 103.
z Data transfer to and from the DTE is flow control by XON / XOFF and RTS / CTS.
AC560PCI (use Agere solution)
z Received data from a digital source using V.92 or V.90 compatible central site modem over the digital telephone network portion of the PSTN at line speed up to 56Kbps with automatic fall-back depends on line condition.
speeds of 14400, 12000, 9600, 7200, 4800 or 2400bps.
VOICE/AUDIO MODE z TAM through the microphone / speakerr interface on Audio Sound card
ERROR CORRECTION z Support V.42 LAMP, MNP 2-4
DATA COMPRESSION z Support V.44, V.42bis and MNP 5
DAA Line interface Capabilities
AS560USB
z DTMF Tone Dial / accurate make-break ratio Pulse Dial z Proprietary transformer-based isolation barrier z Programmable even detect for Caller-ID reception and Power Ring detection z Programmable AC / DC impedance termination for Return-Loss / Specific Countries homologations
FLOW CONTROL z Both transmit and receive fax data are buffered Data transmission over DTE is Flow controlled by XON / XOFF and RTS / CTS.
53
54
RS232 56K V.92 Modem AH560RS
Contact For further information about BaudTec’s products or how BaudTec can provide good service to you to excel your business, you are welcome to visit us at www.baudtec.com.tw or call us on +886-2-26438458.
DATA
FAX
VOICE TAM
56 Kbps
GENERAL DESCRIPTION z Agere Controller technology design Operating System. z Support both ITU-T V.92 and V.90 standard, allows data to be received at speeds up to 56 Kbps from a digitally connected central site Modem. z Plug and Play. z Provide user the convenience for setup modem easily. z Data , Fax , TAM (Telephone Answering Machine). z Call discrimination Concurrent data, fax, voice auto detection.
DATA MODEM z V.92, V.90, V.34bis, V.32 bis , V.32, V.22 bis, V.22 A/B, V.23, V.21, Bell 212A and Bell 103.
FAX MODEM z ITU-T V.17, V.29, V.27 ter and V.21 channel 2 . z TIA/EIA 578 Class 1 FAX send and receive speed rates up to 14.4 kbps.
VOICE/AUDIO MODE z Telephone Answering Machine (TAM). z Include Enhanced ADPCM compression /decompression. z Tone Detection/Generation and Call Discrimination.
55
ERROR CORRECTION z Support V.42 LAPM, MNP 2-4
AH560RS
AUDIOSPAN MODES z Provide full-duplex analog simultaneous audio / voice and data over a single telephone line at a data rate with audio of 4800 bps using V.61 modulation.
DATA COMPRESSION z Support V.44, V.42 bis and MNP 5.
DIALING TYPE z Tone or Pulse dialing.
FLOW CONTROL
z Concurrent DTMF detection.
z Both transmit and receive fax data are buffered within the Modem .
z TAM through the microphone and speaker interface.
z Data transfer to and from the DTE is flow control by XON / XOFF and RTS / CTS.
The icons appear on the products are for application indication only. The trademark or intellectual property is belonging to their respective owners. Products listed in this brochure may be subject to change and product development without prior notice.
