Transcript
DM80VC / DD80VC Two-Stage Variable Speed Gas Furnace 80% AFUE Heating Input: 60,000–100,000 BTU/h ■ Contents
Nomenclature.............................................2 Product Specifications.................................3 Dimensions..................................................4 Airflow Data.................................................6 Wiring Diagram .........................................11 Accessories................................................12
■ Standard Features • • • • • •
• • • • • • •
ComfortNet™ Communicating Systems compatible Heavy-duty stainless-steel dual-diameter, tubular heat exchanger Two-stage gas valve provides quiet, economical heating Durable Silicon Nitride igniter Quiet two-speed draft inducer Utilizes ComfortNet™ communicating, two-stage or single-stage thermostats Self-diagnostic control board with constant memory fault code history output to a dual 7-segment display Color-coded low-voltage terminals with provisions for electronic air cleaner and humidifier Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand Multiple continuous fan speed options offer quiet air circulation Auto-Comfort and enhanced dehumidification modes available California Low NOx emissions-compliant models available AHRI Certified; ETL Listed
■ Cabinet Features
• Multi-position installation: DM80VC: Upflow, horizontal left or right. DD80VC: Dedicated downflow • Convenient left or right connection for gas and electrical service • Cabinet air leakage (QLeak) ≤ 2% • Heavy-gauge steel cabinet with durable baked-enamel finish • Fully insulated heat exchanger and blower section
* Complete warranty details available from your local dealer or at www.daikincomfort.com. To receive the Lifetime Heat Exchanger Limited Warranty (good for as long as you own your home), the 12-Year Unit Replacement Limited Warranty and the 12-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Additional requirements for annual maintenance are required for the Unit Replacement Limited Warranty. Online registration and some of the additional requirements are not required in California or Quebec.
SS-DM80VC
www.daikincomfort.com
9/15 Supersedes 6/15
Nomenclature
D 1
M 2
80 3,4
V 5
C 6
060 7,8,9
3 10
Brand D -‐ Daikin Brand
Gas Valve M -‐ Modulating V -‐ Two Stage
2
A 13
A 14
Major Revision A -‐ Initial Release B -‐ 1st Revision NOx N -‐Natural Gas X -‐ Low NOx
92 -‐ 92% AFUE 80 -‐ 80% AFUE
Cabinet Width A -‐ 14" C -‐ 21" B -‐ 17½" D -‐ 24½"
H -‐ Convertible Two-‐Stage S -‐ Single Stage
Motor C -‐ Variable Speed ECM / ComfortNet E -‐High Efficiency S -‐ Single Speed MBTU/h 040 -‐ 40,000 BTU/h 060 -‐ 60,000 BTU/h 080 -‐ 80,000 BTU/h
X 12
Minor Revision A -‐ Initial Release B -‐ 1st Revision
Configuration M -‐ Upflow/Horizontal C -‐ Downflow/Horizontal D -‐ Dedicated Downflow AFUE 97 – 97-‐98% AFUE 96 – 96% AFUE
A 11
Maximum CFM 2 -‐ 800 CFM 3 -‐ 1200 CFM 4 -‐ 1600 CFM 5 -‐ 2000 CFM
100 -‐ 100,000 BTU/h 120 -‐ 120,000 BTU/h 140 -‐ 420,000 BTU/h
www.daikincomfort.com
SS-DM80VC
Product Specifications
DM80VC 0604B*A
DM80VC 0805C*A
DM80VC 1005C*A
DD80VC 0603B*A
DD80VC 0805C*A
DD80VC 1005C*A
60,000
80,000
100,000
60,000
80,000
100,000
Natural Gas
48,000
64,000
80,000
48,000
64,000
80,000
LP Gas
48,000
64,000
80,000
48,000
64,000
80,000
42,000
56,000
70,000
42,000
56,000
70,000
Heating Capacity High Fire Input (BTU/h)¹ High Fire Output (BTU/h)¹ (below)
Low Fire Input (BTU/h)¹ Low Fire Output (BTU/h)1 (below) Natural Gas
33,600
44,800
56,000
33,600
44,800
56,000
LP Gas
33,600
44,800
56,000
33,600
44,800
56,000
80
80
80
80
80
80
Available AC @ 0.5” ESP
1.5 - 4.0
2.0 - 5.0
2.0 - 5.0
1.5 - 3.0
2.0 - 5.0
2.0 - 5.0
Temperature Rise Range (° F)
20 - 50
20 - 50
25 - 55
30-60
35 - 65
35-65
10” x 8”
10” x 10”
10” x 10”
10” x 8”
10” x 10”
10” x 10”
¾
¾
¾
¾
¾
¾
AFUE 2
Circulator Blower Size (D x W) Horsepower - RPM Speed
Variable
Variable
Variable
Variable
Variable
Variable
Vent Diameter 3
4”
4”
4”
4”
4”
4”
No. of Burners
3
4
5
3
4
5
12.1
12.1
12.1
12.1
12.1
12.1
Electrical Data Min. Circuit Ampacity 4 Max. Overcurrent Device (amps) 5
15
15
15
15
15
15
Ship Weight (lbs)
107
121
124
105
125
129
¹ ² ³ ⁴
Natural Gas BTU/h; for altitudes above from 0’ to 4,500’ above sea level, reduce input rating 4% for each 1,000’ above 4,500’ altitude. Low-fire rate is 70% of high-fire rate. DOE AFUE based upon Isolated Combustion System (ICS) Minimum Circuit Ampacity = (1.25 x Circulator Blower Amps) + ID Blower amps. Wire size should be determined in accordance with National Electrical Codes. Extensive wire runs will require larger wire sizes. Maximum Overcurrent Protection Device refers to maximum recommended fuse or circuit breaker size. May use fuses or HACR-type circuit breakers of the same size as noted.
Notes • All furnaces are manufactured for use on 115 VAC, 60 Hz, single-phase electrical supply. • Gas Service Connection ½” FPT • Important: Size fuses and wires properly and make electrical connections in accordance with the National Electrical Code and/or all existing local codes.
SS-DM80VC
www.daikincomfort.com
3
DM80VC Dimensions
PRODUCT DIMENSIONS Alt. Alt. Gas GasInlet Inlet 19½˝
➛
AMVC8/GMVC8_____X*
1¾˝
1⁷/₁₆˝
➛
33³/₈˝
20˝
19½˝
➛
Alt. Alt. Gas Gas Inlet Inlet
27⁷/₈˝ High-Voltage High Voltage Inlet Inlet
➛
23⁵/₁₆˝
Alt. High Voltage Voltage
13¼˝
Low Voltage Low-Voltage Inlet
Alt. LowVoltage Low Voltage
23¾˝ 28˝
Dimensions Model
W
D
Widths H
A
B
17½”
16”
DM80VC0604B*A
17½”
28”
39”
DM80VC0805C*A
21”
28”
39”
21”
19½”
DM80VC1005C*A
21”
28”
39”
21”
19½”
MODELS
AMVC80704BX** GMVC80704BX**
AMVC80905CX** AMVC81155CX** GMVC80905CX** Minimum Clearances to Combustible Materials GMVC81155CX** Sides
Rear
Front ¹
1
0
3
A
B
17-1/2
16
21
19-1/2
Vent ² are in inches. All dimensions SW
B
6
1
Top 1
Approved for line contact in the horizontal position. ¹ 24” clearance for serviceability recommended. ² Single Wall Vent (SW) to be used only as a connector. Refer to the venting tables outlined in the Installation Manual for additional venting requirements.
8
4
www.daikincomfort.com
SS-DM80VC
DD80VC Dimensions
A
28” 19⅝”
B
High-Voltage Electrical Low-Voltage Electrical
33⅜”
Gas Inlet
18⅜” 11⅜”
Dimensions Model
W
D
Widths H
A
B 16”
DD80VC0603B*A
17½”
28”
39”
17½”
DD80VC0805C*A
21”
28”
39”
21”
19½”
DD80VC1005C*A
21”
28”
39”
21”
19½”
Minimum Clearances to Combustible Materials Sides
Rear
Front ¹
1
0
3
Vent ² SW
B
6
1
Top 1
Approved for line contact in the horizontal position. ¹ 24” clearance for serviceability recommended. ² Single Wall Vent (SW) to be used only as a connector. Refer to the venting tables outlined in the Installation Manual for additional venting requirements.
SS-DM80VC
www.daikincomfort.com
5
DM80VC Airflow Data DM80VC0604B*A Cooling Speeds (@ .1" - .8" w.c. ESP) Tap
A
B
C
D
Adjust
High-Stage CFM
DM80VC0604B*A Heating Speeds (@ .1" - .5" w.c. ESP; Rise Range: 20° - 50°F) Low-Stage CFM
Tap
A
B
C
D
High-Stage CFM
Low-Stage CFM
Rise (°F)
Minus 10%
540
351
Minus 10%
1,125
788
46
Minus 5%
570
371
Minus 5%
1,188
831
43
Normal
600
390
Normal
1250
875
41
Plus 5%
630
410
Plus 5%
1,313
919
39
Plus 10%
660
429
Plus 10%
1,375
963
38
Minus 10%
720
468
Minus 10%
1,215
851
43
Minus 5%
760
494
Minus 5%
1,283
898
40
A
Normal
800
520
Normal
1,350
945
38
Plus 5%
840
546
B
Plus 5%
1,418
992
36
Plus 10%
880
572
Plus 10%
1,485
1,040
35
Minus 10%
990
644
Minus 10%
1,305
914
40
Minus 5%
1,045
679
Minus 5%
1,378
964
38
Normal
1,100
715
Normal
1,450
1,015
36
Plus 5%
1,155
751
Plus 5%
1,523
1,066
34
Plus 10%
1,210
787
Plus 10%
1,595
1,117
33
Minus 10%
1,260
819
Minus 10%
1,395
977
37
Minus 5%
1,330
865
Minus 5%
1,473
1,031
35 33
C
Normal
1,400
910
Normal
1,550
1,085
Plus 5%
1,470
956
Plus 5%
1,628
1,139
31
Plus 10%
1,540
1,001
Plus 10%
1,705
1,194
30
D
DM80VC0805C*A Cooling Speeds (@ .1" - .8" w.c. ESP) Tap
Adjust
DM80VC0805C*A Heating Speeds (@ .1" - .5" w.c. ESP; Rise Range: 20° - 50°F)
Adjust
High-Stage CFM
Low-Stage CFM
Minus 10%
720
468
Minus 5%
760
494
Normal
800
520
Plus 5%
840
Plus 10%
880
Tap
Adjust
High-Stage CFM
Low-Stage CFM
Rise (°F)
Minus 10%
1,350
945
49
Minus 5%
1,425
998
46
Normal
1,500
1,050
44
546
Plus 5%
1,575
1,103
42
572
Plus 10%
1,650
1,155
40
A
Minus 10%
990
644
Minus 10%
1,440
1,008
46
Minus 5%
1,045
679
Minus 5%
1,520
1,064
44
Normal
1,100
715
Plus 5%
1,155
751
B
Normal
1,600
1,120
42
Plus 5%
1,680
1,176
40
Plus 10%
1,210
787
Plus 10%
1,760
1,232
38
Minus 10%
1,260
819
Minus 10%
1,530
1,071
44
Minus 5%
1,330
865
Normal
1,400
910
Plus 5%
1,470
956
C
Minus 5%
1,615
1,131
41
Normal
1,700
1,190
39
Plus 5%
1,785
1,250
37 36
Plus 10%
1,540
1,001
Plus 10%
1,870
1,309
Minus 10%
1,620
1,053
Minus 10%
1,620
1,134
41
Minus 5%
1,710
1,112
Minus 5%
1,710
1,197
39
Normal
1,800
1,170
Normal
1,800
1,260
37
Plus 5%
1,890
1,229
Plus 5%
1,890
1,323
35
Plus 10%
1,980
1,287
Plus 10%
1,980
1,386
34
D
See Notes on following page.
6
www.daikincomfort.com
SS-DM80VC
DM80VC Airflow Data (cont.) DM80VC1005C*A Cooling Speeds (@ .1" - .8" w.c. ESP)
DM80VC1005C*A Heating Speeds (@ .1" - .5" w.c. ESP; Rise Range: 25° - 55°F)
Tap
Adjust
High-Stage CFM
Low-Stage CFM
A
Minus 10% Minus 5% Normal Plus 5% Plus 10%
720 760 800 840 880
468 494 520 546 572
B
Minus 10% Minus 5% Normal Plus 5% Plus 10%
990 1,045 1,100 1,155 1,210
644 679 715 751 787
C
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,260 1,330 1,400 1,470 1,540
819 865 910 956 1,001
D
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,620 1,710 1,800 1,890 1,980
1,053 1,112 1,170 1,229 1,287
Tap
Adjust
High-Stage CFM
Low-Stage CFM
Rise (°F)
A
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,553 1,639 1,725 1,811 1,898
1,089 1,150 1,210 1,271 1,331
55 52 49 47 45
B
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,575 1,663 1,750 1,838 1,925
1,103 1,164 1,225 1,286 1,348
54 51 49 46 44
C
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,598 1,686 1,775 1,864 1,953
1,121 1,183 1,245 1,307 1,370
53 50 48 46 44
D
Minus 10% Minus 5% Normal Plus 5% Plus 10%
1,620 1,710 1,800 1,890 1,980
1,134 1,197 1,260 1,323 1,386
53 50 47 45 43
Notes • These charts are for furnaces installed at 0’ - 4,500’. At higher altitudes, a properly de-rated unit will have the same temperature rise at a particular CFM, while the ESP at that CFM will be lower. • The installation must be adjusted to obtain a temperature rise within the range listed on the furnace nameplate. • Do not operate above .5” w.c. ESP in heating mode. • Propane gas installations will have a high-stage rise approximately 4°F lower than shown in the tables.
Minimum Filter Sizes Model # Filter Size (in²)
DM80VC0604B*
DM80VC0805C*
DM80VC1005C*
(1) 16 x 25 (Side or Bottom)
(1) 16 x 25 (Side or Bottom) ¹
(2) 16 x 25 (Side) or (1) 20 x 25 (Bottom)
Note: Other size filters of equal or greater surface area may be used; filters may also be centrally located. ¹ Use 2 - 16 X 25 filters on side returns or 20 X 25 filter on bottom return if furnace is connected to a cooling unit over 4 tons nominal capacity.
SS-DM80VC
www.daikincomfort.com
7
DD80VC Airflow Data DD80VC0603B*A Cooling Speeds (@ .1" - .8" w.c. ESP) Tap
A
B
C
D
Adjust
High-Stage CFM
DD80VC0603B*A Heating Speeds (@ .1" - .5" w.c. ESP; Rise Range: 30° - 60°F) Low-Stage CFM
Tap
A
B
C
D
High-Stage CFM
Low-Stage CFM
Rise (°F)
Minus 10%
540
351
Minus 10%
945
660
55
Minus 5%
570
371
Minus 5%
998
698
52
Normal
600
390
Normal
1,050
735
49
Plus 5%
627
408
Plus 5%
1,097
770
47
Plus 10%
660
429
Plus 10%
1,155
810
45
Minus 10%
720
468
Minus 10%
1,035
725
50
Minus 5%
760
494
Minus 5%
1,093
765
47
Normal
800
520
Normal
1,150
805
45 43
A
B
Plus 5%
836
543
Plus 5%
1,202
841
Plus 10%
880
572
Plus 10%
1,265
885
41
Minus 10%
900
585
Minus 10%
1,125
790
46 43
Minus 5%
950
618
Normal
1,000
650
Plus 5%
1,045
679
C
Minus 5%
1,188
831
Normal
1,250
875
41
Plus 5%
1,306
912
39
Plus 10%
1,100
715
Plus 10%
1,375
960
38
Minus 10%
1,080
702
Minus 10%
1,215
850
43
Minus 5%
1,140
741
Minus 5%
1,283
898
40
Normal
1,200
780
Normal
1,350
945
38
Plus 5%
1,254
815
Plus 5%
1,411
988
36
Plus 10%
1,320
858
Plus 10%
1,485
1,040
35
D
DD80VC0805C*A Cooling Speeds (@ .1" - .8" w.c. ESP) Tap
Adjust
DD80VC0805C*A Heating Speeds (@ .1" - .5" w.c. ESP; Rise Range: 35° - 65°F)
Adjust
High-Stage CFM
Low-Stage CFM
Minus 10%
720
468
Minus 5%
760
494
Normal
800
520
Plus 5%
836
543
Plus 5%
1,411
988
47
Plus 10%
880
572
Plus 10%
1,485
1,040
45
Tap
A
High-Stage CFM
Low-Stage CFM
Rise (°F)
Minus 10%
1,215
850
55
Minus 5%
1,283
898
52
Normal
1,350
945
49
Adjust
Minus 10%
990
644
Minus 10%
1,305
915
51
Minus 5%
1,045
679
Minus 5%
1,378
964
48
Normal
1,100
715
Plus 5%
1,150
748
B
Normal
1,450
1,015
46
Plus 5%
1,515
1,059
44
Plus 10%
1,210
787
Plus 10%
1,595
1,115
42
Minus 10%
1,260
819
Minus 10%
1,395
975
48
Minus 5%
1,330
865
Normal
1,400
910
C
Minus 5%
1,473
1,031
45
Normal
1,550
1,085
43
Plus 5%
1,463
951
Plus 5%
1,620
1,135
41
Plus 10%
1,540
1,001
Plus 10%
1,705
1,195
39
Minus 10%
1,620
1,053
Minus 10%
1,485
1,040
45
Minus 5%
1,710
1,112
Minus 5%
1,568
1,097
42
Normal
1,800
1,170
Normal
1,650
1,155
40
Plus 5%
1,881
1,223
Plus 5%
1,724
1,207
38
Plus 10%
1,980
1,287
Plus 10%
1,815
1,270
37
D
See Notes on following page.
8
www.daikincomfort.com
SS-DM80VC
DD80VC Airflow Data (cont.) DD80VC1005C*A Cooling Speeds (@ .1" - .8" w.c. ESP) Tap
A
B
C
D
DD80VC1005C*A Heating Speeds (@ .1” - .5” w.c. ESP; Rise Range: 35° - 65°F)
Adjust
High-Stage CFM
Low-Stage CFM
Minus 10%
765
497
Minus 10%
1,395
975
61
Minus 5%
808
525
Minus 5%
1,473
1,031
58
Normal
850
553
Plus 5%
888
578
Plus 10%
935
Minus 10%
1,035
Tap
Adjust
High-Stage CFM
Low-Stage CFM
Rise (°F)
Normal
1,550
1,085
55
Plus 5%
1,620
1,135
52
608
Plus 10%
1,705
1,195
50
673
Minus 10%
1,485
1,040
57
Minus 5%
1,568
1,188
54
Normal
1,650
1,155
52
A
Minus 5%
1,093
711
Normal
1,150
748
Plus 5%
1,202
781
Plus 5%
1,188
1,188
49
Plus 10%
1,265
822
Plus 10%
1,815
1,270
47
Minus 10%
1,305
848
Minus 10%
1,575
1,105
54
Minus 5%
1,378
896
Minus 5%
1,188
1,188
51
B
Normal
1,450
943
Normal
1,750
1,225
49
Plus 5%
1,515
985
Plus 5%
1,188
1,188
46
Plus 10%
1,595
1,037
Plus 10%
1,925
1,350
44
C
Minus 10%
1,665
1,082
Minus 10%
1,620
1,135
53
Minus 5%
1,758
1,143
Minus 5%
1,188
1,188
50
Normal
1,850
1,203
Normal
1,800
1,260
47
Plus 5%
1,900
1,257
Plus 5%
1,188
1,188
45
Plus 10%
2000
1,323
Plus 10%
1,980
1,385
43
D
Notes • These charts are for furnaces installed at 0’ - 4,500’. At higher altitudes, a properly de-rated unit will have the same temperature rise at a particular CFM, while the ESP at that CFM will be lower. • The installation must be adjusted to obtain a temperature rise within the range listed on the furnace nameplate. • Do not operate above .5” w.c. ESP in heating mode. • Propane gas installations will have a high-stage rise approximately 4°F lower than shown in the tables.
Minimum Filter Sizes Model # Filter Size (in²)
DD80VC0603B*
DD80VC0805C*
(2) 10 x 20 or (1) 16 x 25 (Top Return)
DD80VC1005C*
(2) 14 x 20 or (1) 20 x 25 (Top Return)
Note: Other size filters of equal or greater surface area may be used; filters may also be centrally located. ¹ Use 2 - 16 X 25 filters on side returns or 20 X 25 filter on bottom return if furnace is connected to a cooling unit over 4 tons nominal capacity.
SS-DM80VC
www.daikincomfort.com
9
10
www.daikincomfort.com
10
20
30
40
50
60
70
30
80
90
100
40
50
60
700
600 CFM
90
100
2000 2200 2400 CFM
1800
1600
1400
OUTPUT BTU/HR x 1000 Output BTU/h x 1,000
80
1200
1100
1000
900
70
800
Formulas FORMULAS
110
120
130
CFM x 1.08
140
BTUBTU/h OUTPUT 1.08 x RISE Output== CFM CFM xx1.08 x Rise BTU OUTPUT RISE = = BTU/H Output ÷ CFM Rise 1.08
BTUBTU OUTPUT TEMPERATURE RISEChart CHART OutputvsVs. Temperature Rise
150
Temperature Rise Range Chart
SS-DM80VC
TEMPERATURE RISE Temperature Rise
Wiring Diagram
JUNCTION BOX
WH DISCONNECT
TO 115VAC/ 1 Ø /60 HZ POWER SUPPLY WITH OVERCURRENT PROTECTION DEVICE
WH BR
RD
PU
OR
PU
PU
2 1
5
BK
4 3
SEE N OTE 6 HUMID IF IER
HUM-OUT
EAC
OR
BK
EAC
YL
RD RD
10
11
12
7
8
9
4
5
6
1
2
3
CONT FAN HEAT OFF DLY T-STAT SEE NOTE 5
BK
24 VAC 115 VAC
40 VA
TRANSFORMER
DIAGNOSTIC LED' S
HOT SURFACE IGN IT ER
FLAME S ENSOR 115 V AC
O
Y1
Y2
W2
G
C
W1
2
R
1
WH
2
3
4
GR PK
BK
CIRCULATOR BLOWER
INDUCTOR CO IL
AUTO RESET PRIMARY LIMIT CONTR OL
W1
LOW FIRE PRESS. SWITCH
24V HUM.
PS1 (2)
C
NO W2 Y2
TO MICRO
PS2 ( 12)
NO C
HIGH FIRE PRESS. S WTICH
MANUAL RESET ROLLOU T LIMIT CONTR OLS
HL I ( 1) MVL (13)
PM
MVH ( 14) C
HI
MVC ( 8)
C
GND ( 5)
BK
BK
BLOW ER COMPARTMENT DOOR SW ITCH (OPEN WHEN DOOR OPEN)
GND
TR (11) TO R
WH GND
24V HUM.
GY
BK
24 VAC AUTO RESET AUXILIARY LIMIT CONTR OLS
PSO (7)
O
WH
1
Y1
24 V THERMOSTAT CONNECTIONS
5 4 3 2 1
TH (4)
HLO ( 10)
DEHUM
BL
BK
TO +VDC
NEUTRAL 40 V A TRANSFORMER
G
DEHUM
PU
YL FUSE
DEHUM ENABLE TRIM ENABLE
1
24V THERMOSTAT CONNECTIONS
YL
15
R
RD
TWO- STAGE INTEGRATED CONTROL MODULE
RD
DIP SWITCHES
BR
14
FUSE 3 A
BL
3
NEUTRAL
IND LO
IGN
FS
2
NEUTRAL
ID BLW R
2
4 CIRCUIT MOTOR CONNECTOR
GN
BL
BL
WH
COOL PRFL HEAT AF
13
24 V 3A
ECM MTR RD HARNESS
TRIM %
NEUTRAL
ELECTRONIC AIR CLEANER IND HI
1
4
NEUTRAL
HUMID IF IER
HUM
L INE COOL A F
GND NEUTRAL
GND ( 4) + VDC (1) INDOOR AIR CIRCULATOR BLWR
RX (2) TO MICRO
TX (3) AUX
INTEGRATED CON TROL M ODULE
HUMIDIF IER NOTES: 1. SET HEAT ANTICIPATOR ON ROOM THERMOSTAT AT 0.7 AMPS. 2. MANUFACTURER'S SPECIFIED REPLACEMENT PARTS MUST BE USED WHEN SERVICING. 3. I F ANY OF THE ORIGINAL WIRE AS SUPPLIED WITH THE FURNACE MUST BE REPLACED, IT MUST BE REPLACED WITH WIRING MATERIAL HAVING A TEMPERATURE RATING OF AT LEAST 105 $ C. USE COPPER CONDUCTORS ONLY. 4. UNIT MUST BE PERMANENTLY GROUNDED AND CONFORM TO N.E.C. AND LOCAL CODES. 5. TO RECALL THE LAST 6 FAULTS, MOST RECENT TO LEAST RECENT, DEPRESS SWITCH F OR MORE THAN 2 SECONDS WHILE IN STANDBY (NO THERMOSTAT INPUTS) 6. HUMIDIFIER INSTALLATION OPTIONS: USE HUM TERMINAL TO RUN HUMIDIFIER DURING HEAT CALL (COMMUNICATING OR LEGACY MODES). USE HUM-IN AND HUM-OUT TERMINALS TO RUN HUMIDIFIER DURING HEAT CALL ( COMMUNICATING MODE OR LEGACY MODE) OR INDEPENDENTLY FROM HEAT CALL (COMMUNICATING MODE ONLY - SETUP I S DONE WITHIN COMMUNICATING THERMOSTAT)
COLOR CODES: PK PINK BR BROWN WH WHITE BL BLUE GY GRAY RD RED YL YELLOW OR ORANGE PU PURPLE GN GREEN BK BLACK
INTEGRATED CONTROL MODULE
5 CIRCUIT CONNECTOR
HUM
HUMIN
HUMOUT
FS
LINE
INTEGRATED CONTROL MODULE
BK RD WH
AUTO RESET AUXIL IARY LIMIT CONTROL
NEUTRAL
INDOOR AIR CIRCULATOR BLW R
HUM-IN L INE
PU
BLOWER COMPARTMENT
DIS CONNECT
JUNCT ION BOX INDUCTOR COIL 70kBTU ,9 0kBTU, 115kBTU MODELS ONLY
GND
BURNER COMPARTMENT
N
DOOR SW ITCH
GN
INDUCED DRAFT BLOWER
WH RD BK
3
CHASSIS GROUND
AUTO RESET PRIMARY LIMIT CONTROL
MANUAL RESET ROLLOUT LIMIT CONTROLS
GND
L
⚡
BL
WARNING: DISCONNECT POWER BEFORE SERVICING. WIRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED.
High Voltage: Disconnect all power before servicing or installing this unit. Multiple power sources may be present. Failure to do so may cause property damage, personal injury, or death.
YL
LOW VOLTAGE (24V) LOW VOLTAGE FIELD HI VOLTAGE (115V) HI VOLTAGE FIELD JUNCTION TERMINAL INTERNAL TO INTEGRATED CONTROL PLUG CONNECTION
⚠ Warning
FLAME SENSOR
EQUIPMENT GND FIELD GND
GAS VALVE
Wiring is subject to change. Always refer to the wiring diagram or the unit for the most up-to-date wiring.
WH
PM
1
WH
BK
3
WARNING:DISCONNECT POWER BEFORE SERVICING. W IRING TO UNIT MUST BE PROPERLY POLARIZED AND GROUNDED.
N
NO
HIGH FIRE PRESSURE SWITCH
GAS VALVE (HONEY WELL)
2
L
BK
C
NO
TWO STAGE
C
YL
C
BL
YL
SWITCH 2 CIRCUIT CONNECTOR
HI
24V HUM.
YL
1
2
LOW FIRE PRESSURE
BR
SWITCH ASSEMBLY HOT SURFACE IGNITER
YL
RD
ID BLOWER TWO-STAGE PRESSURE
TO 115 VAC/ 1 Ø /60 HZ POWER SUPPLY WITH OVERCURRENT PROTECTION DEVICE
GND
FIELD SPLICE SWITCH (TEMP.) IGNITER SWITCH (PRESS.) OVERCURRENT PROT. DEVICE
0140F01168-B
SS-DM80VC
www.daikincomfort.com
11
Accessories Model
Description
LPM-06
LP Conversion Kit (Springs & Orifice) ¹
AFE18-60A
Fossil Fuel Kit (must be used in a dual-fuel application with a compatible thermostat)
ASAS
Electronic Air Cleaners (sizes = -10, -11, -12 or -18)
AMU
Media Air Cleaners (sizes = 1620, 2020, 1625 or 2025)
¹ White-Rodgers and Honeywell valves
Our continuing commitment to quality products may mean a change in specifications without notice. © 2015 • Houston, Texas • Printed in the USA.
12
www.daikincomfort.com
SS-DM80VC
