Transcript
151
16 / 8 / 4 CH Real Time MPEG-4 Network DVR
DMR - 504
DMR - 508 / 516
16CH / 8CH / 4CH BuiltBuilt-in DVDDVD-RW Writer or CDCD-RW Writer
1
Make Sure Your Package Contains :
MODEL
516
508
504
16CH / 8CH / 4CH DVD-RW / CD-RW
Digital Video Recorder
ˇ
ˇ
ˇ
ˇ
Adapter
ˇ
ˇ
ˇ
ˇ
Licensed Software AP
ˇ
ˇ
ˇ
ˇ
IR Transmitter and IR Receiver
ˇ
ˇ
Optional
ˇ
Power and Data Bus
ˇ
ˇ
ˇ
ˇ
DSUB PIN Connector
ˇ
ˇ
ˇ
ˇ
Screws
ˇ
ˇ
ˇ
ˇ
Please read instructions thoroughly before operation and retain it for future reference. MPEG4 DVR SERIES_V0.989
1
2 Install HDD : DMR - 516 / 508 16CH (D) / 8CH (D) / 4CH (D)
Carefully following the steps to ensure correct installation. *** Note: If you want to install two HDDs, please set one HDD to “Master Mode” or “Single Mode”, and the other one to “Slave Mode”. *** 1
2
1)
Open the upper cover of the DVR and screw out the bracket.
2)
Screw HDD to the HDD bracket. 3 ~ 8
3)
Connect the HDD to power connector and IDE BUS (make sure to align the HDD precisely to the pin connection). 9 ~ 14
4)
Close the upper cover of the DVR.
2
~
DMR - 504
Carefully following the steps to ensure correct installation. *** Note: Please set one HDD to “Master Mode” or “Single Mode” ***
• Step 1 Connect the connector with the HDD (refer to Picture 1). • Step 2 Put HDD into the HDD cartridge. Please notice the bottom side is power side as chart shows (refer to Picture 2). • Step 3 Screw the HDD to the cartridge. Before you screw the HDD, please be aware that you must to level pin 1 of the HDD at pin 1 mark, because the screw hole is different from different HDD brands. Then screw the HDD correctly (refer to Picture 3 and 4). You must precisely align the hard disk to the pin connection to ensure correct installation. • Step 4 Reverse the HDD and put it into DVR (refer to Picture 5 and 6). • Step 5 Connect the HDD with DVR (refer to Picture 7). • Step 6 Lock the cabinet by turning the key clockwise (refer to Picture 8).
A ( locked ) B ( unlocked ) Note : If you do not lock the cabinet, the DVR system will not function properly.
• Step 7 Close the cap (refer to Picture 9).
3
3
Physical Connections :
Take DMR - 516 as an example
DMR - 508 3 LOOP
INPUT
LOOP
MONITOR
LOOP
INPUT
INPUT
LOOP
INPUT
LOOP
LOOP
LOOP
CALL RS 485 EXTERNAL I/O
IR
DISK ARRAY
D/V
1
3
2
4
INPUT
INPUT
INPUT
INPUT
LOOP
LAN
USB
LINK ACT. DC 19V
4 75? 1
HI-IMPEDANCE
DMR - 504 LOOP
INPUT
LOOP
1
INPUT
LOOP
2
INPUT
3
LOOP
INPUT
MONITOR
1
CALL
4
IN
2
3
OUT
4
LINK ACT.
D/ V
IR DISK ARRAY
EXTERNAL I/O
LAN
4
DC 19V
4 System Time Setup : Before using this unit, please set up the system time first in order to process the functions correctly. Æ Press “MENU” button to enter menu list Æ Enter the default password “0000” to access in Æ Go to “DATE” menu and set the date Æ Press “＋” or “－” button to set the correct time of the DVR Æ If users would like to activate the daylight saving function, please turn the daylight saving function “ON” and press “ENTER” button to enter the daylight saving setting page. Æ After setting, please press ” MENU ” to exit
DATE DATE FORMAT DAYLIGHT SAVING
2005-NOV-08 13:55:22 Y-M-D ON
DAYLIGHT SAVING ON OFF ADJUST
4TH-SUN-MAR 01: 00: 00 4TH-SUN-OCT 01: 00: 00 01 : 00
NOTE: The illustrated setting means: During the daylight saving time period (start from the 4th Sunday of March, end on the 4th Sunday of October), the DVR system time will plus one hour.
5 Record & Playback : RECORD
Record: MANUAL RECORD ENABLE EVENT RECORD ENABLE TIMER RECORD ENABLE OVERWRITE RECORD IMG SIZE RECORD QUALITY MANUAL RECORD IPS EVENT RECORD IPS TIMER RECORD IPS TOTAL IPS SHARE
DMR - 516 / 508: “RECORD” 16CH (D) / 8CH (D) / 4CH (D): “RECORD” DMR - 504: “REC”
5
Playback: Press “ PLAY ” button, the DVR will playback the last recorded video. • FAST FORWARD (F.F. ) & FAST REWIND (REW) : • PAUSE / IMAGE JOG: • STOP: • CHANNEL SHIFT (Display Mode, Full Screen Switch, and Channel Display Switch) DMR - 516 / 508 : “SHIFT”
+ “SET”
16CH (D) / 8CH (D) / 4CH (D): “SHIFT”
+ “SET”
DMR - 504 : “SET”
•
SLOW PLAYBACK DMR - 516 / 508 : “SHIFT”
+ “SLOW” + “SLOW”
16CH (D) / 8CH (D) / 4CH (D): “SHIFT” DMR - 504 : “SLOW”
•
AUDIO DMR - 516 / 508 : “SHIFT” DMR - 504: “
+ “AUDIO”
”
6 Backup : DMR - 516 / 508 / 504 16CH (D) / 8CH (D) / 4CH (D)
BACKUP USB BACKUP
USB BACKUP START TIME END TIME AVAILABLE SIZE CHANNEL HDD NUM BACKUP TO USB
2005-12-27 11 : 25 : 46 2005-12-27 11 : 50 : 58 0512 MB 01 MASTER START
6
This function is not included in DMR - 504 / 508 / 516
BACKUP USB BACKUP DISK BACKUP
DISK BACKUP START TIME END TIME AVAILABLE SIZE CHANNEL HDD NUM BACKUP TO DISK
2005-11-30 15 : 30 : 00 2005-12-01 16 : 00 : 00 4083 MB 01 MASTER START
1)
Press “＋” and “－” buttons to open the DVD / CD WRITER. Put the DISK into DVD / CD WRITER, and press “＋” and “－” buttons again to close. (NOTE: Use DVDDVD-R DISK only)
2)
Go to “DISK BACKUP” menu and set the start time, end time, channel and HDD number.
3)
After setting up the backup information, move the cursor to “START”, and press “ENTER”. While the files are backup to DISK, users will see the backup completed percentage shown on the screen.
4)
After backup files to DISK, “DISK BURN FINISH” will shown on the screen. Press “＋” and “－” to take out the DISK from DVD / CD WRITER.
5)
Put DISK into the DVD / CD -ROM of PC. (O/S system: Windows XP, and Windows2000). And then double click the file Æ Convert the file Æ Play the backup file at PC Side.
DVD_R_01
For detailed instructions, please refer to the user’s manual.
7
7 IR Transmitter : ＊ IR control for PTZ, DVR, and remote switch ＊ IR emission distance: straight line is 10m; transmit at left and right 22.5° is 8m ＊ Control up to 255 PTZ and remote switch / Control up to 255 DVR ＊ Enabling different ID ＊ Current consumption: AAA size battery × 2
＊ CAMERA control buttons: Button (1) to (10). (button (9) is used for control the switch) ＊ DVR control buttons: Button (11) to (29). ＊ OTHER control buttons – Support controlling both CAMERA & DVR. Button (30) to (33). ＊ F3 is dummy button.
8
