Preview only show first 10 pages with watermark. For full document please download

Dmt-dmw Microwaves_warming Drawer

   EMBED

Share

Transcript

COMBINATION INSTALLATIONS Revised 09/22/14 Page 1/1 Document # PGCI-039 DMT2420 or DMW2420 Microwave/ Warming Drawer All tolerances: ±1/16” (±1.6 mm), unless otherwise stated. WARNING 5/8“ min. (1.6 cm) 120 Vac electrical outlet for microwave A 28 3/8" (72.1 cm) overall stacked height • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • All appliances must be installed in accordance with the accompanying installation instructions. 16 3/4" (42.5 cm) 1 1 1/8" min. (2.9 cm) B 1 PLANNING GUIDE 120 Vac electrical outlet for warming drawer 9 1/8" (23.2 cm) 3/4" min. (1.9 cm) 7/8“ min. (2.2 cm) 120 Vac electrical outlet for microwave CUTOUT DIMENSIONS WITH ADMWTK MICROWAVE TRIM KIT A 29" (73.7 cm) overall stacked height 16 3/4" (42.5 cm) 1 1 1/2" min. (3.8 cm) B 1 120 Vac electrical outlet for warming drawer 9 1/8" (23.2 cm) NOTE: 1. 2. 3. 3/4” (1.9 cm) support platform (flush with cutout). See individual appliance Planning Guide pages to determine overlays. Spacing between appliances and drawers/doors shown is minimum required to allow for ventilation and prevent scraping. Additional space may need to be added for appearance. CUTOUT DIMENSIONS WITH AMTK MICROWAVE TRIM KIT Microwave Kit (A) Cutout Width Warming Drawer Models (B) Cutout Width ADCMTK271* 25 3/4” (65.4 cm) 27” 25 1/2” (64.8 cm) ADCMTK301* 28 1/4” (71.8 cm) 30” 28 1/2” (72.4 cm) All AMTK series trim kits 24 3/8” (61.9 cm) 36” * 34 3/8” (87.3 cm) * Available only in stainless steel. Matches DMW2420 only. All specifications subject to change without notice. * No comparable ADMWTK series microwave kit available www.dacor.com Phone: (800) 793-0093 3/4" min. (1.9 cm)