Transcript
DOKKi.eu CPN-6
6-bay Docking Station for Opticon models OPN-3002n and OPN-3002i This unique 6-bay docking station can handle any mix of up to six OPN-3002i and OPN-3002n. Currently the CPN-6 can only be used for charging the OPN's. New functionality like USB communication will only become available if Opticon releases new firmware that supports this.
Box contents: • • •
1 x CPN-6 1 x power supply 1 x USB cable*
* currently not used
CPN-6 shown with OPN-3002n (scanners NOT included)
SPECIFICATIONS
PHYSICAL
dimensions (W x D x H): weight : case material : case color : case surface :
439 x 130 x 42 mm / 17.28 x 5.12 x 1.65 in 940 g / 33.16 oz ABS-HH black sand grain
SOFTWARE driver
: none
POWER & CONNECTION power supply connection
: 1 x power supply, Input 100-240VAC 50/60Hz – Output 5VDC/2A : 1 x mini USB (5-PIN female) rearside (currently unused)
CPN-6 rear view: power and mini-USB connection
JNC Service BV Pakketboot 27 – 3991 CH – HOUTEN – THE NETHERLANDS Phone : +31-306351661 Fax: +31-306351670 Web: www.dokki.eu Mail:
[email protected]
DOKKi.eu is a trademark of JNC Service BV. Copyright JNC Service BV. All rights reserved. This information is subject to change without prior notice. CPN-6_001
