Domestic Heating - Zoppas Industries

Transcript

DOMESTIC HEATING DOMESTIC HEATING Productive sites: TOWEL RAIL HEATERS Radiators Outdoor heaters A towel rail is a domestic appliance normally used to dry the towels and sometimes as additional heating source for the bathroom. For towel rails we have a wide range of heating elements and electronic controls to regulate either the ambient or the fluid temperature. They can be installed into an appliance only electrical or connected to the central heating systems. Towel rail heaters Electrical floor heating Storage heaters Baseboard heater Radiant panel Mirror heater Toilet seat & bidet heaters Characteristics News • • • • • • • 3 Bar self relief pressure valve Advantages Heating body safety increased Optimisation of the thermal exchange CE certified and patented Reduced dimensions Controlled and directable discharge of any overpressure fluid Rohs certified Shape: cartridge or tubular heating element Class insulation: I or II Technology: cartridge (standard, monotube, PTC, RID T), tubular, heating cable Tube Material: stainless steel Diameter: 10 - 11 - 12,5 - 14 - 16 mm Normally designed with a power cord with or without plug Eventual connections with electronic control unit: quick, faston Accessories HOME COMFORT - Towel rail heaters - Radiators dry appliances - Radiators wet appliances - Storage heaters - Domestic fan coils - Convector - Outdoor heaters - Mirror heaters - Toilet seat & bidet heaters • • • • • T piece in chrome and white colour Blanking plug G ½ thread Single box Custom instruction leaflet Electronic control unit Whistle 3 Bar Valve 00 - 02 - 0217 Shorty ET Shorty IR Heating Cable Shorty SW Poseidone Zefiro Cartridge 00 - 03 - 0217 DOMESTIC HEATING Productive sites: Productive sites: RADIATORS DRY APPLIANCES RADIATORS WET APPLIANCES A dry radiator is a domestic appliance used to heating a room. It is represented normally by an aluminum body incorporating a natural heating stone. We have a wide range of heating stones and related electronic controls to regulate the ambient temperature. A wet radiator is a domestic appliance used to heating a room. It is represented normally by an aluminum body incorporating a heating element: cartridge or tubular heaters. We have a wide range of heating elements and related electronic controls to regulate the ambient temperature. Characteristics Characteristics • • • • • • • • • • • • Shape: normally rectangular Class insulation: II Stone Material: soap stone, volcanic stone Dimension: 300mm high, thickness 32 mm with different width Normally designed with two power leads Accessories • Electronic control unit Sheath material: carbon steel and stainless steel Heating element connection to the heating body: threaded nipple, flange Technology: cartridge (monotube, PTC, RID T), tubular Diameter: 6,25 - 8 - 8,5 – 14 -16 mm Single or double power Normally designed to incorporate a thermal cut out and a thermal fuse as safety Normally designed with two leads for cartridge technology and faston for tubular one Accessories • Electronic control unit Medusa Stone Heater 00 - 04 - 0217 Tubular TH-Rad Circe Wizzy Cartridge 00 - 05 - 0217 DOMESTIC HEATING Productive sites: Productive sites: RADIANT PANEL STORAGE HEATERS A radiant panel is a domestic appliance used to heating a room. It is represented normally by an aluminum heatsink incorporating a heating element or plane metallic surface with applied a flexible heating element. We have a wide range of different section of aluminum heatsink and concerning the flexible elements we can offer customized power distribution in different areas. A storage heater is a domestic appliance used to heating a room. Such appliance is storing the heat in a medium (like stones or cast iron body) and is softly releasing it when needed. We have a wide range of different tubular heating element to be used in the selected medium. Characteristics Characteristics Heatsink: • Profile: Single or double (coupled mechanically) • Material: aluminium for medium temperature (<350°C) • Profile size: std 138 - 140 - 169 mm (possibility for customization) • With o without supporting holes • • • Shape: normally U or “M” bent shape Material: carbon steel (for medium temperature) and stainless steel (for high temperature) Diameter: 6,25 - 8,5 mm Flexible heating element: • Shape: normally rectangular • Class insulation: I or II (depending on layer thickness) • Technology: cable on alu foil, etched foil • Material: mylar, silicone • Normally with cable or leads Etched Foil (Mylar) Heat Sink 00 - 06 - 0217 Etched Foil (Silicone) Cable on Alu Foil Tubular 00 - 07 - 0217 DOMESTIC HEATING Productive sites: DOMESTIC FAN COILS – CONVECTOR OUTDOOR HEATERS A fan coil or convector is a domestic appliance used to heating quickly a room. It is represented normally by a metallic frame just incorporating an electric heating element in a static model or also a fan to have heated forced air. We have a wide range of different heating element technologies able to optimize the heat exchange. An outdoor heater is a domestic appliance to provide warm in open space area or to prevent frost in specific external part of a house (gardening water tap, garage ramp, …) In the first case, it is represented normally by a metallic frame just incorporating an electric heating element working with infrared emission while, on the others, it is generally used an heating cable. We have a wide range of heating element to cover all need in this sector. Characteristics Characteristics For Tubular technology: • Shape: straight h.e., U, M, double M, etc. • Sheath material: stainless steel for high temperature (>800°C) like AISI 309, INCOLOY 800/840 • Diameter: 6,25 - 8 and 8,5 mm • With o without flange For Tubular technology: • Shape: straight h.e. • Sheath material: stainless steel for high temperature (>800°C) • Diameter: 6,25 - 8 and 8,5 mm • With o without metallic reflector For heating cable: • Resistive Wire : metal resistive alloy • Insulation : PVC (105°C) , Silicone (120°C) • Power: uniform or different distribution • Insulation class: I (max diam. 3,5mm) or II (max diam. 4,2mm) For open coil: • Shape: single or double heating side on a mica support • Wire material: NiCr or FeCrAl • Models: STH for static air and UDH for forced air For heatsink: • Profile shape: I,Y,V,X with or without fins • Material: aluminium alloy for medium temperature (<350°C) • Equipped with o without thermal cut out for safety Heat Sink 00 - 08 - 0217 Open Coil Tubular Outdoor Unit Heating Cable 00 - 09 - 0217 DOMESTIC HEATING Productive sites: Productive sites: MIRROR HEATER TOILET SEAT & BIDET HEATERS An electric heated mirror is a domestic heating appliance where a heater is installed on the backside of the mirror and provide heat to avoid condensation during a shower or bath. An electric heated toilet seat is a domestic heating appliance designed to give more comfort. We have the capability to make any specific shape and electric circuit to match customer specification integrating sensors and safety devices. Characteristics Characteristics • • • • • • • • • • Shape: normally rectangular Class insulation: I Technology: etched foil Material: mylar or silicone With or without cable and plug Etched Foil 00 - 010 - 0217 Shape: oval Class insulation: I or II (depending on layer thickness) Technology: heating cable on aluminum foil Heating cable insulation material: Silicone, PVC With or without cable and plug Cable on Alu Foil 00 - 011 - 0217 DOMESTIC HEATING Productive sites: HOME BOILER HEATERS Electric hot water compensation An electric boiler is a domestic appliance used to provide usually hot sanitary water and could be added to the main house heating system as secondary heating source, It is generally represented by a cylinder sized to store hot water for the house need. We have a wide range of heating element to match all customer specification and a wide range of tube material to offer high level of resistance against corrosion. Home boiler heaters Electric hot water compensation Electric hot water compensation Characteristics • • • • Sheath material: copper, stainless steel, Incoloy 800 series, titanium Heating element connection to the boiler: different shape of brass and stainless steel flange or head Diameter: 6,25 , 8,5 Hermetic sealing Accessories • Different rod round thermostat for the flange heating element WATER CENTRAL SYSTEM - Home boiler heaters - Electric hot water compensation - Instantaneous hot water system Tubular (Zero Radius) Tubular (with Head) 00 - 012 - 0217 Tubular (with Flange) Thermostat 00 - 013 - 0217 DOMESTIC HEATING Productive sites: Productive sites: ELECTRIC HOT WATER COMPENSATION INSTANTANEOUS HOT WATER SYSTEM A water storage cylinder is a domestic appliance used to collect hot water coming from many heating source such as gas boiler, pellet burner, pellet stove, solar panel, heat pump. We have a wide range of heating element to match all customer specification and a wide range of tube material to offer high level of resistance against corrosion. An instantaneous electric hot water system is a domestic appliance to provide hot water in a short time. The system can provide hot water for all the house or just in a single distribution point such as shower, tap. We have a wide range of different heating element to be fitted in a compact tank. Characteristics Characteristics • • • • • • • • • Sheath material: copper, stainless steel, Incoloy 800 series, titanium Heating element connection to the boiler: different shape of brass and stainless steel flange or head Diameter: 6,25 , 8,5 Voltage configuration of the heating element: single, double or three-phase Hermetic sealing Sheath material: Copper, stainless steel, Incoloy 800 series, titanium Heating element connection to the system: different shape of brass and stainless steel flange or head Diameter: 6,25 and 8,5 mm Voltage configuration of the heating element: single or three-phase Accessories • Different safety and working termostat • Different electric connection box Tubular 00 - 014 - 0217 Tubular Tubular 00 - 015 - 0217 DOMESTIC HEATING Productive sites: PELLET STOVE Pellet Stove Pellet burners A pellet stove is a domestic appliance used to normally heat a room or a complete house depending of its power and configuration (air or hydro). We have a wide range of different heating element (cartridges with or without flange or nipple, ceramic heaters, tubular heating element) and electronic unit to control the complete stove. Burner System Characteristics Cartridges: • Sheath material: Incoloy-800 • Heating element typical connection to the stove: nipple, flange • Technology: High Density cartridge • Diameter: 9.5 - 10 - 12.5 - 16 mm Ceramic heaters: • Material: Ceramic • Heating element connection to the stove: directly fitted into the heating inlet air tube • Technology: Ni-Cr wire into a ceramic support • Diameter: 19 - 31 mm COMBUSTION - Pellet Stove - Pellet burners - Burner System Tubular heating element: • Sheath material: Incoloy 800 • Heating element connection to the stove: flange, customized system using a fixing screw • Diameter: 6,25mm Accessories Electronic Control Unit • Electronic control unit • Tube Cartridge 00 - 016 - 0217 00 - 017 - 0217 DOMESTIC HEATING Productive sites: Productive sites: PELLET BURNERS BURNER SYSTEM A pellet burner is a domestic appliance that use pellet in the combustion to produce hot water for the complete central heating system composed by radiators, towel rails, floor heating and can also produce sanitary water for the bathrooms and kitchen. Burner system is a domestic appliances sourced normally by oil or gas that produce hot water for the central heating system (radiator, towel-rail, floor heating) and sanitary water also (kitchen and bathroom). We have a wide range of different heating element. We have a wide range of different heating element (cartridges with or without flange or nipple, ceramic heaters, tubular heating element) and electronic unit to control the complete burner. Characteristics Characteristics Cartridges: • Sheath material: Incoloy-800 • Heating element connection to the burner: nipple, flange • Technology: High Density cartridge • Diameter: 9.5 - 10 - 12.5 - 16 mm Cartridges: • Sheath material: Stainless steel • Heating element connection to the system: nipple • Technology: PTC • Diameter: 10 - 12.5 mm Ceramic heaters: • Heating element connection to the stove: opportunely put in the tube • Technology: Ni-Cr Wire into a ceramic support • Diameter: 19 - 31 mm Flexible heating element: • Shape: normally rectangular • Technology: etched foil, thick-film • Material: mylar, silicone • Normally with cable or leads Tubular heating element: • Sheath material: Incoloy 800 • Heating element connection to the burner: customized system using a fixing screw • Diameter: 6,25 mm For heating cable: • Resistive Wire: metal resistive alloy • Insulation: Silicone (120°C) • Power: different distribution Accessories • Air inlet tube PTC 00 - 018 - 0217 Etched Foil (Silicone) 00 - 019 - 0217 cod. 690943568 - 0217 Via Podgora, 26 - 31029 Vittorio Veneto (TV) - Italy Tel. +39 0438 9101 - Fax +39 0438 912272 - 912236 www.zoppasindustries.com - [email protected]