Domestic Series

Transcript

Domestic Series KEVIN DSP Sinewave Home UPS is developed with advanced technology to provide Pure Sine Wave output. Kevin Inverters / UPS delivers best of the power supplies if compared with ordinary UPS and inverter systems. UPS of other brands delivers distorted output particularly on normally encountered loads like Compact Fluorescent Lamp (CFL), Tube Lights, Motors, Coolers, Computers, etc. Distorted waveform is harmful for almost all the home appliances. Kevin delivers quality output with reliable performance at a reasonable price. DSP Sinewave Home UPS SALIENT FEATURES 1. DSP Based Design with absolute and stable Sine Wave output voltage and frequency 2. 3. State of the art MOSFET based PWM technology with greater efficiency at lower cost with Dynamic Stability Over Temperature Protection 4. 5. More back-up being a Sine Wave UPS (ASIC Control) No humming Noise (Silent UPS) 6. 7. Selector Switch for Normal / UPS Selector Switch for High Charging and Low Charging 8. 9. Intelligent Charger for Deep Discharged Battery. Advance Battery Management for longer battery life and prevent battery from overcharging. APPLICATIONS 1. 2. Power Back-up for House hold as well as the computer Small Water pumps and all motor based small applications 3. TV Sets, Fans, Tube Lights, etc. TECHNICAL SPECIFICATIONS* Description 650VA 850VA 1450VA Output Voltage at No Load 220V±5V AC 220V±5V AC Output Frequency 50.0 Hz ± 1.0Hz 50.0 Hz ± 1.0Hz Output Wave Form Sine Wave Sine Wave Nominal Battery Voltage 12V 24V Low Battery Cutoff 10.5V ± 0.2V 20.4V ± 0.2V INVERTER MODE Change Over Time Inverter to Main Aprx. 20msec Aprx. 20msec Change over Time to Inverter Aprx. 30msec Aprx. 30msec Input Voltage 100 V to 280 V ± 5 V 100 V to 280 V ± 5 V Change Over Time Inverter to Main <=8msec* <=8msec* Change over Time to Inverter <=8msec* <=8msec* Input Voltage 180 V to 260 V ± 5 V 180 V to 260 V ± 5 V USB MODE At mains low and high cut* CHARGING MODE Charger Current Two Mode Mains ON; Inverter On; Battery Low; Normal Charging 8.0+/- 3 A Normal Charging 8.0+/- 3 A Mains, UPS On Charging/ Charged. Mains, UPS On Charging/ Charged. Short circuit & Overload Short circuit & Overload Battery Charging / Charged; Short Over temperature Circuit / Over Load Reserve Battery, Over Temperature, Mains Fuse Blown Over temperature Mains Fuse Blown Mains Fuse Blown *The technical specifications are subject to change without prior notice for further improvement of products WEIGHT & DIMENSIONS Model 530 VA 850 VA 1450 VA Capacity 650 VA /12 VDC 850 VA /12 VDC 1450 VA /12 VDC Dimensions 340x330x185mm 340x330x190mm 430x400x240mm Net Weight 9.1 kg 9.95 kg (+/- 0.5 kg) 17.25 kg Gross Weight 9.8 kg 10.80 kg 18.6 kg LOAD CHART * Load 650VA 850VA 1450VA T.V 1 - - 1 - - 1 - - Tube Light 3 2 - 4 3 - 8 6 - Fan 3 2 - 4 3 - 8 6 - Computers** - 1 4 - - 5 - 1 10 Conditions Apply** Cyber UPS This IGBT Based Cyber UPS by Kevin provides Pure Sinewave output. Our IGBT Based cyber UPS in comparison of UPSs of other brands does not deliver distorted output. Distorted waveform is harmful for all your sensitive and sophisticated electronic appliances. Thus, Kevin IGBT Based Cyber UPS is the preferred choice of a wide clientele across the country. It delivers pure power with reliable performance and at a reasonable price. Features: • • • • • • • • • • • 15% Extra Back - up Wide charging Window ( 110VAC to 280VAC) Compact Design & Light Weight 20%- 25 % Saving in Electricity Compatibility With Generator OSCRCTM Technology Based Charger External DC Fuse (Easy to Replace) Capable of Charging/Recovering Deep-Discharged Battery Zero Battery Consumption in ‘Switch Off ’ & ‘Mains Off ‘ Conditions Pure Sine Wave even with Computer & Compact Fluorescent Lamp (CFL) Load Lower Battery Discharge as compared to a conventional Home UPS/Inverter Technical Specifications* DESCRIPTION 650VA 850VA 1450VA INVERTER MODE Output Voltage At No Load 220 VAC ± 7 VAC Output Frequency 50.0 Hz ± 1.0Hz Output Wave Form Sine Wave Nominal Battery Voltage 12 VDC 24 VDC MAX. NO LOAD CURRENT @ 1.7A FULLY CHARGED BATTERY 1.4A BATTERY LOW ALARM 10.6 ± 2 VDC 21.2 ± 0.2 VDC BATTERY LOW PROTECTION 10.4 ± 2 VDC 20.8 ± 0.2 VDC EFFICIENCY > 85% > 85% NO LOAD CURRENT @ SWITCH 0A OFF/MAINS OFF THD ( TOTAL HORMONIC DISTORTION ) < = 2.5% @ resistive UPS MODE INPUT VOLTAGE RANGE 180 to 270 VAC ± 10 VAC CHANGEOVER TIME MAXIMUM < = 10ms NORMAL MODE INPUT VOLTAGE RANGE INPUT VOLTAGE CHARGING RANGE 90 to 280 VAC ± 10 VAC FOR MAXIMUM CHANGE OVER TIME 90 to 280V ± 10 VAC < = 10ms CHARGING MODE CHARGING CURRENT @ 220VAC 8A +/- 1A (NC) 10A +/- 1A CHARGING CURRENT @ 220VAC 11A +/- 1A (HC) 13A +/- 1A BOOST CHARGING VOLTAGE 14.2 ± 0.2 VDC 28.4 ± 0.2 VDC FLOAT CHARGING VOLTAGE 13.7 ± 0.2 VDC 27.4 ± 0.2 VDC PROTECTIONS Protection WIRING FAULT, BATTERY VOLTAGE LOW (4 AUTO RETRIES), OVER LOAD (6 AUTO RETRIES) BATTERY OVER CHARGE, OVER TEMPERATURE, SHORT CIRCUIT (ONE RETRY), BATTERY DEEP DISCHARGE PROTECTION DISPLAYS Mains on, Main Voltage, Output Voltage UPS ON / OFF LCD Display Short Circut, Overload, Battery Low, Load % Mains ON / OFF, Battery Charging / Charged / Battery Low  WEIGHT AND DIMENSIONS With Packaging LXWXH in mm 350x290x135 Without Packaging WXDXH in mm 310x215x85 365x320x125 310x240x85 Net Weight 3.2Kg 3.9Kg Gross Weight 3.9Kg 4.5Kg GENERAL Communication 4 PIN Serial interface for calibration of various parameters Operating Temprature range 0 Deg to 45 Deg Relative Humidity 0-90% Non Condensing Relative Humidity 0-90% Non Condensing Note : The charging currunt can be increased / decreased using the unieque and first-in-class On Site Charging Rate Control (OSCRS) features Load Chart * (Take from cyber UPS PDF) Load 650VA/12V 850VA/12V 1450VA/12V T.V 1 - - 1 - - 1 - - Tube Light 4 4 - 6 5 - 10 8 - Fan 3 4 - 4 5 - 7 9 - Computers** - - 4 - - 5 - - 10 Note: The Charging Current can be increased / decreased using the unique and "first-in- class" On Site Charging Rate Control OSCRCTM features. **For Computer with 14" TFT monitors