Transcript
For more information on DORMA visit www.barbourproductsearch.info
Panic Hardware
DORMA
AD 4000 Series
DORMA For AD 4000 Series
more information on DORMA visit www.barbourproductsearch.info Panic Hardware
DORMA offers a complete line of panic hardware for virtually any egress control installation in which security, reliability and appearance are considerations. Our devices cover the full range of hardware requirements found in such places of public assembly as hospitals, universities and schools, public auditoriums, commercial buildings, hotels and municipal buildings. DORMA offers a comprehensive line of AD 4000 Series narrow stile architectural touchbar devices, including concealed and surface panic bolts and rim panic latch. Each model is available with a broad range of outside operating trim and special electrical functions.
PLUS POINTS
DORMA AD panic hardware is manufactured to the same exacting standards for quality and workmanship that have made DORMA door closers the leading door controls worldwide. The AD 4000 Series features solid, wrought metals in touchbars, rails and covers. The brass, bronze, stainless steel and aluminium materials provide an architectural finish that will remain attractive even in the most punishing conditions. Chassis are constructed of an alloy steel with zinc dichromate finish and stainless steel dead-locking pullman type latchbolts, while end caps are a rugged zinc alloy die casting.
AD 4000 DATA & FEATURES
FOR THE TRADE • Engineered, reliable product for worry-free sales possibilities • Excellent value when comparing product, price and service • Handling and functions are field-changeable to minimise inventory variants
Data & Features
4300 4400 4100 Series Series Series
Rim Panic Latch
●
NA
NA
Surface Panic Bolt
NA
●
NA
FOR THE INSTALLER
Concealed Panic Bolt
NA
NA
●
• Easy to install, with simple, straightforward installation instructions and fixing templates • Versatility by field-cutting units to suit varying door widths • Minimal adjustment required at installation • Simple design requires virtually no in-service maintenance
Size “A” Doors 860 to 1160mm Wide
●
●
●
Size “B” Doors 710 to 860mm Wide
●
●
●
Size “C” Doors 560 to 860mm Wide
●
●
●
Size “D” Doors 410 to 688mm Wide
●
●
●
Door Height up to 2440mm
●
●
●
Door Height 2440 to 3050mm (Not BS EN 1125)
●
●
●
Door Thickness 45 to 58mm
●
●
●
Door Thickness 45 to 90mm
●
●
●
Device Non-Handed (Exit-Only Function)
●
NA
NA
Device Handed but Field-Reversible
●
●
●
Hex Key Dogging
●
●
●
GENERAL INFORMATION
Cylinder Dogging
●
●
●
• Full door-width touchbar and rail, chassis and latchbolt covers are fabricated from brass, bronze, aluminium or stainless steel • Die-cast end cap for touchbar assembly finished in comparable electro-plated finish • Some models non-handed depending on outside operating trim and function • All devices easily field-reversible • Fasteners provided for metal and wood door applications
Deadlocking Pullman Type Latchbolts
●
●
●
Round Slide Bolt (Bottom Rod Only)
NA
●
●
Electric Latchbolt Retraction
●
●
●
Monitor Switch in Touchbar
●
●
●
Battery Powered Alarm Exit
●
●
●
Direct Wired Alarm Exit
●
●
●
The Panic Hardware products in the DORMA AD4000 series have been tested and approved to EN 1125 and carry the CE conformity mark in accordance with supplement ZA to that standard.
Outside Operating Trim
●
●
●
BS EN 1125
●
●
●
CE Marked
●
●
●
CERTIFIRE Approved for Timber & Metal Fire Doors
●
●
NA
Anti-corrosion
●
●
●
FOR THE USER • Durable finishes are long lasting • Few, but easily replaced, parts for continued service • Life-cycle tested to guarantee on-going performance FOR THE SPECIFIER/ARCHITECT • Covers all applications with rim panic latch, surface panic bolt and concealed panic bolt configurations • Variety of locking options and outside operating trim • Electrical operating functions for specialised applications • Complete range of architectural finishes
The quality-assurance system at the DORMA Group North America, Steeleville, Illinois, U.S.A. plant is certified to ISO 9001
● – Standard Feature ● – Optional Feature NA – Not Available 2
For more information on DORMA visit www.barbourproductsearch.info
Door Handings Panic Hardware
Single Doors
Latch
4300 Series Rim Panic Latch
4400 Series Surface Panic Bolt
Bolt
Concealed Bolt
4401 4408 (metal or timber doors)
4301 4308 (metal or timber doors)
4100 Series Concealed Panic Bolt 4101 4108 (metal doors only)
Double Doors
Rebated Pair of Doors Latch 4300 Series
Latch 4300 Series
Bolt 4400 Series
Concealed Bolt 4100 Series
Panic Latch x Panic Bolt 4301 x 4401 4308 x 4401 A 320 rebate keep is required for the 4000 range of rebated doors
Bolt 4400 Series
Concealed Bolt 4100 Series
Bolt 4400 Series
Concealed Bolt 4100 Series
Flush Meeting Stiles Pair of Doors Panic Bolt 4401 4408 4408
x x x x
Panic Bolt 4401 4401 4408
Flush Meeting Stiles Pair of Doors Concealed Panic Bolt x Concealed Panic Bolt 4101 x 4101 4108 x 4101 4108 x 4108 (metal doors only)
3
DORMA For AD 4300 Series
more information on DORMA visit www.barbourproductsearch.info Rim Panic Latch
AD 4300 SERIES The AD 4300 Series is a rim panic latch fitted completely to the face of the door. The 19mm deadlocking latchbolt engages a keeper, normally surface applied to the frame (recessed keeper also available). This provides simple installation, yet secure locking of the door. SPECIFICATIONS • Fits metal or wood doors 45mm to 58mm thick, for doors up to 90mm thick specify, “EXT” for longer trim spindle and screws • Size “A” device fits 1160mm wide door, can be cut to door 860mm wide on site. • Size “B” device fits 860mm wide door, can be cut to door 710mm wide on site. • Size “C” device fits 860mm wide door, can be cut to door 560mm wide on site. • Size “D” device fits 680mm wide door, can be cut to door 410mm wide on site. • Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included • Where dogging is not desired, specify suffix “LD” • Exit-only devices (not outside operating trim) are non-handed • Devices with outside operating trim are handed but easily field-reversible, requires K43 conversion kit (circlip pliers needed to fit). • Devices with K43 conversion kit can be supplied from factory, handed. Add suffix 08 to AD43-- eg. AD4308.
4
KEEPERS, MINIMUM STILE AND BACKSET REQUIREMENTS
For more information on DORMA visit www.barbourproductsearch.info
KEEPERS, MINIMUM STILE AND BACKSET REQUIREMENTS
5
DORMA For AD 4400 Series
more information on DORMA visit www.barbourproductsearch.info Surface Panic Bolt
AD 4400 SERIES The AD 4400 Series is a panic bolt fitted completely to the face of the door. The 19mm deadlocking, pullman type latchbolts engage surface or recessed keepers in the frame head and floor, providing secure dual-point latching of the door. SPECIFICATIONS • Fits metal or wood doors 45mm to 58mm thick, for doors up to 90mm thick specify “EXT” for longer trim spindle and screws • Size “A” device fits 1160mm wide door, can be cut to door 860mm wide on site. • Size “B” device fits 860mm wide door, can be cut to door 710mm wide on site. • Size “C” device fits 860mm wide door, can be cut to door 560mm wide on site. • Size “D” device fits 630mm wide door, can be cut to door 410mm wide on site. • Standard device fits doors up to 2440mm high, specify suffix “ETR” for doors 2440mm to 3050mm high • Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included • Where dogging is not desired, specify suffix “LD” • Optional 12mm round rod slide bolt with 12mm projection can be substituted for pullman type bottom latch only, specify suffix “SB” • Devices are handed but easily fieldreversible • Devices with outside affecting trim are handed but easily field-reversible, requires K44 conversion kit (circlip pliers needed to fit).
6
KEEPERS
For more information on DORMA visit www.barbourproductsearch.info
MINIMUM STILE AND BACKSET REQUIREMENTS
7
DORMA For AD 4100 Series
more information on DORMA visit www.barbourproductsearch.info Concealed Panic Bolt
AD 4100 SERIES The AD 4100 Series is a panic bolt concealed in the lock stile of the door, providing improved aesthetic appeal. The touchbar assembly is fitted to the face of the door. The 19mm deadlocking pullman type latchbolts engage keepers recessed in the frame head and floor, providing secure dual-point latching of the door. SPECIFICATIONS • Fits metal doors 45mm to 58mm thick, for doors up to 90mm thick specify, “EXT” for longer trim spindle and screws • Size “A” device fits 1160mm wide door, can be cut to door 860mm wide on site. • Size “B” device fits 860mm wide door, can be cut to door 710mm wide on site. • Size “C” device fits 860mm wide door, can be cut to door 560mm wide on site. • Size “D” device fits 680mm wide door, can be cut to door 410mm wide on site. • Standard device fits doors up to 2440mm high, specify suffix “ETR” for doors 2440mm to 3050mm high • Hex key dogging standard, cylinder dogging optional, specify suffix “CD”. CD option requires American mortice cylinder, not included • Where dogging is not desired, as with some fire door requirements, specify suffix “LD” • Optional 12mm round rod slide bolt with 12mm projection can be substituted for pullman type bottom latch only, specify suffix “SB” • Devices are handed but easily fieldreversible • Devices with outside affecting trim are handed but easily field-reversible, requires K44 conversion kit (circlip pliers needed to fit).
8
KEEPERS
For more information on DORMA visit www.barbourproductsearch.info
MINIMUM STILE AND BACKSET REQUIREMENTS
9
DORMA For AD 4000 Series
more information on DORMA visit www.barbourproductsearch.info Electrical Options and Auxiliary Equipment
OPTIONAL ELECTRIC FUNCTIONS Electric Latchbolt Retraction – Specify suffix ES. A solenoid concealed in the touchbar assembly provides instantaneous retraction of the latchbolt to provide access from the secure side of door. Remote control can be accomplished with switching devices such as key switches, card readers, etc., that provide a normally open or closed electrical contact. The solenoid is rated for continuous duty, 24V DC, 5 AMP inrush for 350 milliseconds, .21 AMP holding current.
Monitor Switch – Specify suffix MS. A micro switch in the touchbar assembly which provides local and/or remote notification when the touchbar is depressed. The switch is a single pole, double throw switch, 0.50 AMP, 28V DC. Latch Monitor – Specify suffix LM. A micro switch attached to the device chassis on AD 4400 Series units only, provides local and/or remote notification of movement of the panic bolt rods and latchbolt without depressing the touchbar.
• Size “A” device fits 1220mm wide door, can be cut to door 890mm wide on site • Size “B” device fits 915mm wide door, can be cut to door 735mm wide on site
AD100 POWER SUPPLY The AD100 Power Supply is capable of powering and controlling (2) AD 4000 Series Panic Devices with the ES Electric Latchbolt Retraction feature. • Input … 220V • Input circuit protection … 1 AMP fuse • Output … 24V DC, 6 AMP surge for 0.5 seconds, 1 AMP continuous, per zone • Output circuit protection … 2 AMP Push to Reset circuit breaker • Enclosure … 205mm high x 205mm wide x 100mm deep NEMA 1 Type enclosure for indoor use with hinged cover and knock-outs
ES101 DELAY MODULE
ES103 RELAY MODULE
The ES101 optional time delay module for the AD100 Power Supply delays the relatching of ES series panic devices and has a field-adjustable range between 1 second and 60 minutes.
The ES103 optional relay module is a double pole, double throw relay with screw terminal connections. This coil rating is 24V DC, .025 AMP. The contact rating is 2.0 AMP at 30V DC.
This is a fail-secure option that allows time to enter a door after using a card reader or key switch, or may be required when ES Series panic devices are used in conjunction with an automatic door operator.
Relays may be wired in parallel if additional contacts are required. This relay may be required to signal other systems such as an automatic door operator.
The ES101 Delay Module must be used when 2 ES Devices are required to be used simultaneously.
BATTERY ALARM PANIC DEVICE AD 4000 Series panic devices are available in an integral battery powered alarm configuration. The 90 decibel alarm contained in the panic device touchbar and rail assembly activates when the touchbar is depressed and sounds continuously until the battery is completely discharged. Alternatively, a factory-furnished option allows the alarm to sound for four minutes, then automatically re-arms. Furnished with and controlled by a lock cylinder and key, the unit allows ten seconds to exit through the door after arming the alarm, indicated by an intermittently flashing red L.E.D. light in the touchbar. A yellow L.E.D. in the touchbar will flash, until manually reset by key, to indicate an unauthorised exit even if the alarm has automatically reset.
• Specify suffix “BPA” to AD 4000 Series model number for Battery Alarm Device • Specify suffix “BPAR” for 4 minute auto reset Battery Alarm Device • Specify suffix “DWA” for direct hard-wired option • Size “A” device fits 1220mm wide door, can be cut to door 890mm wide on site • Size “B device fits 915mm wide door, can be cut to door 735mm wide on site
EMERGENCY EXIT ONLY PUSH TO OPEN ALARM WILL SOUND
The unit is furnished with a 9-volt, industrial grade battery concealed in the end cap assembly for easy replacement. A tamper-proof switch will activate the alarm if unauthorised removal of the battery is attempted. An option for 12- or 24-Volt direct power wiring is available. 10
BATTERY ALARM DEVICE
DORMA For AD 4000 Series
more information on DORMA visit www.barbourproductsearch.info Outside Entry Functions & Operating Trim
OUTSIDE ENTRY FUNCTIONS & OPERATING TRIM AD 4000 Series panic devices are available with a variety of outside entry functions and operating trim, including knob and lever sets. Trim is designed to accept a variety of cylinder styles including Euro-profile, Swedish and Australian oval and American round cylinders.
Specific type cylinder requirement varies by the function selected. Refer to the details specified with each trim and function outlined below. Cylinders are not included. If no outside trim is required specify: Function 01-Exit Only
JP 11/JP12
Function 11-Entrance by thumbturn and pull – Key locks or unlocks thumbturn.
79mm 79mm
Function 12-Entrance by thumbturn and pull only when released by key – Key removable only when locked. 216mm
41mm
JK 08/09
JT 08/09
J003
87mm
7/8 (22)
90mm
216mm
8-1/2 (216)
216mm
8-1/2 (216) 1-5/8 (41)
41mm 41mm
Function 08-Lockable Knob – Key locks or unlocks knob which retracts latchbolt.
Function 08-Lockable Knob – Key locks or unlocks knob which retracts latchbolt.
Function 09-Lockable Knob – Same as 08 function but key removable only when locked.
Function 09-Lockable Knob – Same as 08 function but key removable only when locked.
08EP Adapts Euro-profile half cylinder
08EP Adapts Euro-profile half cylinder
Note: Function 08/09 trim is universally prepared for all cylinder styles, which are installed with one of the following cylinder adapter kits. Kits must be specified with trim:
Note: Both 08 and 09 functions are provided with each knob or lever set and the choice of function is determined at installation by assembling the appropriate locking tab on the trim.
JT 23
7/8 (22)
1-5/8 (41)
JK 23
90mm
216mm
87mm
216mm
41mm
Function 23-Active Lever – Lever retracts latchbolt, always unlocked.
41mm
Function 23-Active Lever – Knob retracts latchbolt, always unlocked. 11
DORMA For AD 4000 Series
more information on DORMA visit www.barbourproductsearch.info Specifications
SPECIFICATIONS AD 4300 rim panic latch with heavy duty, full door width touchbar, deadlocking stainless steel latchbolt, and hex key dogging.
OPTIONS CD LD SB ES MS LM BPAR BPA DWA
AD 4400 surface panic bolt with heavy duty, full door width touchbar, top and bottom deadlocking pullman type latchbolts, and hex key dogging. AD 4100 concealed panic bolt with heavy duty full door width touchbar, top and bottom deadlocking pullman type latchbolts, and hex key dogging.
Cylinder Dogging Less Dogging Round Bottom Slide Bolt Electric Latchbolt Retraction Monitor Switch in Touchbar Latchbolt Monitor Battery Alarm Device (time-limited alarm) Battery Alarm Device (continuous alarm) Battery Alarm Device (direct wired)
FINISHES DESCRIPTION Designation 605 625 628 630
Designation 606 611 612 613
STANDARD FINISHES Panic Device Outside Trim Polished, lacquered brass Polished, lacquered brass Polished chrome Polished chrome Clear anodised satin aluminium Knob/Lever: Satin stainless steel Escutcheon: Clear anodised satin aluminium Satin stainless steel Knob/Lever: Satin stainless steel Escutcheon: Satin nickel OPTIONAL FINISHES Panic Device Outside Trim Satin, lacquered brass Satin, lacquered brass Polished, lacquered brass Polished bronze Satin, lacquered bronze Satin bronze Satin, dark oxidised, oil rubbed bronze Satin, dark oxidised, oil rubbed bronze CUSTOM FINISHES
Designation RAW
Unfinished cold-rolled steel touchbar, rail, and covers provided with light oil protection for custom finishing by others.
AD 4400 Series Panic Device
HOW TO ORDER
Function
To order, list model number device size, options, trim and cylinder mounting kit, keepers, finish and hand.
Device Size Cylinder Dogging Monitor Switch
AD4408C CD X MS X JT08 X 08EP X 426/431 X 630 X RH Model
Options
Trim
Cylinder Kit
Keepers
DORMA UK Limited Wilbury Way Hitchin Hertfordshire SG4 0AB
DORMA Ireland Limited 19 Sandyford Office Park Foxrock Dublin 18
Tel: 01462 477600 Fax: 01462 477601 E-mail:
[email protected]
Tel: 01 295 8280 Fax: 01 295 8284 E-mail:
[email protected]
www.dorma-uk.co.uk
www.dorma.ie
Finish Model
