Transcript
Ethernet-based, Standalone Media Converters
RoHS Compliant
PSE-McBasic Series
Supporting the IEEE 802.3af PoE standard, the standalone PSE-McBasic media converter offers unparalleled installation flexibility and cost-savings. Features and Benefits Employs the IEEE 802.3af Power Over Ethernet Standard • Significant cost-savings; no need to extend existing power/cabling to supply power to a device • Provides greater installation flexibility; choose the best location for a powered device
Meets a multitude of installation requirements • Available for multi-mode or single-mode fiber • Single-strand fiber options • Available with ST or SC fiber connectors
Eases troubleshooting • LinkLoss and FiberAlert features assist in diagnosing problems on fiber optic networks
Connecting and powering small devices at the edge of a wired network infrastructure becomes increasingly important to LANs and MANs as they add WiFi access points, webcams, entry control systems, etc. Sometimes, the most optimal location for one of these devices is not only out of reach of the existing copper wiring, but also too far from a power source. Deploying a media converter supporting the Power Over Ethernet standard is the solution for both extending an access point up to 100 km from the central office equipment as well as powering the end-device. Equipped with all the features that have made the McBasic series one of IMC Networks’ most popular brands — copper-to-fiber conversion, troubleshooting capability, a small, rugged design, and an internal AC power supply — the 100 Mbps PSE-McBasic also employs the IEEE 802.3af Power Over Ethernet (PoE) standard.
Power Over Ethernet Technology
Application Example Incorporating the PoE standard into the product design allows network administrators to install the PSE-McBasic up to 100 meters from an access point while support of single-mode fiber allows installation of the media converter up to 80 km from a central office (CO) switch. The best location for a WiFi access point, for example, may be on a utility pole outside or in the ceiling where there is no AC outlet. The PSE-McBasic makes the connection between the CO switch, via single or multi-mode fiber, and a twisted pair access point while also providing power to a WiFi device. Using the PoE technology, the PSE-McBasic becomes the Power Source Equipment for the Powered Device. This gives installers greater installation flexibility since the access device no longer has to be in the immediate proximity of a power source and/or UPS.
www.imcnetworks.com
800-624-1070
Power Over Ethernet technology allows the PSE-McBasic to be the Power Source Equipment (PSE) by distributing an electrical current across existing copper data cabling. If the connected unit requires power and is 802.3af compliant, the PSE-McBasic detects it and supplies power. LEDs on the PSE-McBasic indicate the amount of power being supplied to the “Powered Device” (PD) as well as if the PSE-McBasic is over temperature or over current or has an open circuit.
Technical Specifications • • • • • • • • • • • • • •
IEEE 802.3u 100Base-TX twisted pair IEEE 802.3u 100Base-FX or SX fiber IEEE 802.3af: Acts as a PSE – Power sourcing device Includes fixed, internal AC power AutoCross for MDI-II/MDI-X; plus switch for manual configuration Features LinkLoss and FiberAlert Features Auto Negotiation 50/125µm or 62.5/125µm multi-mode 9/125µm single-mode Available for single-strand fiber Connectors: RJ-45, and ST or SC Small, rugged design Supports Half- and Full-Duplex operation Includes diagnostic LEDs
Operating Temperature:
Regulatory Approvals:
+32° to +122° F (0° to +50° C); 5% to 95% (non-condensing), 0 – 10,000 ft. altitude
• FCC Class A • UL/cUL, CSA, CE
Storage Temperature:
Dimensions: 1.45”H x 4.73”W x 7.30”D (3.68 cm x 12.01 cm x 18.54 cm)
-13° to +158° F (-25° to +70° C); 5% – 95% (non-condensing)
Shipping Weight: 1.8 lbs (.82 kg)
Power Rating: 100-240V AC, 50/60 Hz, 1A
Fiber Optics Specifications For each product listed below in the Ordering Information section, the DISTANCE represents an approximate fiber distance based on industrystandard fiber attenuation specifications. Actual distances will vary for each installation. For complete power budgets and information on calculating specific distances, visit www.imcnetworks.com/go/fcs or contact IMC Networks Fiber Consulting Services at 949-465-3000.
Ordering Information PART # PSE
DESCRIPTION
DISTANCE
PART # DESCRIPTION Rackmount/Wallmount Accessories
855-16929
TX/SX-MM850-ST
2 km
895-39226
McBasic, MediaChassis, AccessEtherLinX Rackmount Brackets
855-16930
TX/SX-MM850-SC
2 km
895-39227
McBasic, MediaChassis, AccessEtherLinX Wallmount Brackets
855-16927
TX/FX-MM1300-ST
5 km
895-39228
McBasic, MediaChassis, AccessEtherLinX x3 Rackmount Shelf
855-16928
TX/FX-MM1300-SC
5 km
895-39949
McBasic, iMediaChassis/3, MediaChassis, AccessEtherLinX Rackmount Shelf
855-16931
TX/FX-SM1310/PLUS-ST
40 km
855-16932
TX/FX-SM1310/PLUS-SC
40 km
855-16933
TX/FX-SM1310/LONG-ST
80 km
855-16934
TX/FX-SM1310/LONG-SC
80 km
855-16935
TX/FX-SM1550/LONG-SC
80 km
Single-Strand Fiber * 855-16951
TX/SSFX-SM1310-SC (1550rcv)
855-16952
TX/SSFX-SM1550-SC (1310rcv)
20 km 20 km
855-16953
TX/SSFX-SM1310/PLUS-SC (1550rcv)
40 km
855-16954
TX/SSFX-SM1550/PLUS-SC (1310rcv)
40 km
855-16955
TX/SSFX-SM1310/LONG-SC (1550rcv)
60 km
855-16957
TX/SSFX-SM1550/LONG-SC (1310rcv)
60 km
*Th *These products d t have h single-strand i l t d fiber fib technology. t h l Deploy D l in i pairs, i or connectt to t another th compatible IMC Networks single-strand fiber product. For more information go to: www.imcnetworks.com/products/SSFX.cfm
IMC Networks
IMC Networks
IMC Networks
IMC Networks
Headquarters
Europe
Eastern US/Latin America
Fiber Consulting Services
19772 Pauling Foothill Ranch, CA 92610 TEL: 949-465-3000 FAX: 949-465-3020
[email protected] www.imcnetworks.com
Herseltsesteenweg 268 B-3200 Aarschot | Belgium TEL: +32-16-550880 FAX: +32-16-550888
[email protected]
28050 U.S. Hwy. 19 North, Suite 306 Clearwater, FL 33761 TEL: 1-800-624-1070 727-797-0300 (Latin America) FAX: 727-797-0331
[email protected]
For information call: TEL: 949-465-3000 1-800-624-1070 (US/CAN) +32-16-550880 (Europe)
[email protected]
Copyright © 2009 IMC Networks. All rights reserved. The information in this document is subject to change without notice. IMC Networks assumes no responsibility for any errors that may appear in this document. Specific product names may be trademarks or registered trademarks and are the property of their respective companies.
DS-PSE-McBasic-0907
