Transcript
DC/DC Product Specification - 1/4th brick fully regulated DCDC converter.
Rev 04/09/2012 AGQ100C series Page 1 of 2
AGQ100C-48S3V3B 1/4th brick Input voltage: 36-75V Single Output: 3.3V Rated power: 82.5W
Product Description th
The AGQ100C-48S3V3B is the latest high efficiency 1/4 brick series. It operates from a wide input range of 36Vdc to 75Vdc and provides a regulated output voltage of 3.3Vdc. The output is rated to a power level up to 82.5Watts .Its protection features include non latching OCP, OTP and OVP. It also has an enable pin on the primary side of the converter. The unit is a baseplate design that is optimised for either contact-cooled applications or forced airflow applications.
Specifications
Special Features
-2:1 Wide input range -Optimised for High density, small space applications
-Low ripple and noise -Fixed switching frequency
-High efficiency -High capacitive load capability
-Basic insulation system - Openframe structure with baseplate option
Safety
-UL, cUL: UL60950 -TUV/CE: IEC/EN60950
Feature Output power: Super high efficiency: Functions:
Isolation: Safety UL: TUV/CE: Input specification Input range Input Surge Control specification Enable Output specification Output Voltage Trim range Output Current Ripple and noise Regulation Switching Frequency Isolation Voltage Transient response.
100W 88.5% at full load , 87.8% at half load Remote control, trim function, Sense; Input LVP, output OVP and OCP, OTP Open frame structure with base plate option. Basic Insulation UL60950 IEC/EN60950 36Vdc to 75Vdc 100V for 100mSec TTL compatible Positive or Negative enable 3.3V dc –20% to +10% Vout 25 A 100mV pk-pk Load regulation = 20mV Max, Line regulation = 10mV Max 320Khz - 360Khz 1500Vdc 180mV deviation 400uS recovery (50%- 75% - 50% Io,max, 0.1A/ s )
Environmental Specification Storage Temperature Ambient operating temp MTBF at 25degC Over temperature protection
-55 to +125 deg C -40 to +85 deg C 2.5 Million hours (80% load, 300LFM, 40°C Ta) 130
DC/DC Product Specification - 1/4th brick fully regulated DCDC converter.
Mechanical (baseplate version)
Rev 04/09/2012 AGQ100C series Page 2 of 2
Pin Assignments Pin # Function 1 +V in 2 Enable 3 -V in 4 -V out 5 -Sense 6 Trim 7 +Sense 8 +V out
Ordering information Input Output Output Efficiency voltage voltage current 48V 15V 6.7A 92.5% 48V 15V 6.7A 92.5% 48V 15V 6.7A 92.5% 48V 15V 6.7A 92.5% Notes - Standard converter is Negative enable - ‘B’ = Baseplate - ‘-6’ = 3.8mm pin length. - ‘-L’ = RoHS-6 compliant. - ‘-Y’ = RoHS-5 compliant.
Part number AGQ100C-48S3V3-6Y AGQ100C-48S3V3B-6Y AGQ100C-48S3V3-6L AGQ100C-48S3V3B-6L
Notes, 1\ 20Mhz bandwidth. External 10uF tantalum capacitor placed across +Vout and –Vout; 33 uF e-cap or equivalent placed across +Vin and –Vin. 2\ Efficiency measurements taken at full load and nominal line and Tamb = 25degC 3\ All specifications taken at nominal line, full load and Tamb = 25degC unless otherwise noted 4\ Mechanical dimensions are for reference only. Dimensions are in MM. Mechanical tolerance = +/0.5mmm 5\ Technical reference notes should be consulted for detailed information when available. 6\ All specifications subject to change without notice 7\ Warranty 2 years 8\ The through-hole terminated modules aree intended for wave-soldering process – special request for other manufacturing processes to be made to Emerson
