Transcript
MPS-253011-02
Linear Amplifier 2400 to 2700 MHz ! IP3: 45 dBm ! P1dB: 28.5 dBm ! Gain: 13 dB
Model #: MPS-253011-02
Features ! ! ! ! !
Leadless Chip Carrier +45 dBm IP3 +28.5 dBm P1dB 13 dB Gain Single Positive Bias
! Interchangeable with MPS-253011-82 both electrically and mechanically ! Systems applications for this device are: MMDS, ISM, and WLL
Description The MPS-253011-02 is a modular amplifier designed to meet the ultralinear transmitter output requirements of worldwide ISM band systems and wireless cable distribution. The amplifier exhibits an extremely high IP3 (+45 dBm). The device is self contained with all matching and bias circuitry included. Typical applications for this device include output stages for North American and European 2.4 GHz ISM band and MMDS band systems. It is useful for direct sequence and or frequency hopped spread spectrum systems where excellent output linearity is required. Typical systems include wireless LAN, industrial telemetry, and wireless cable links.
Absolute Maximum Ratings Bias Voltage Continuous RF Input Power Peak Input Power Case Operating Temperature Storage Temperature
8.0V 950 mW 1400 mW +85ºC -65ºC to +125ºC
MicroWave Technology, Inc., 4268 Solar Way, Fremont, CA 94538 Tel: (510) 651-6700 Fax: (510) 651-2208 Web Site: www.mwtinc.com E-mail:
[email protected]
Specifications
MPS-253011-02
Electrical at 25ºC, Vdd= 7.5 V, Zo= 50 S Symbol
Parameter
Min.
Freq SSG P1dB IP3 VSWR GOF GOT Idd
Frequency Range Small Signal Gain P out at 1 dB Compression Third-order Intercept* Input / Output Gain Variation over Freq. Gain Variation over Temp. DC Current
2400 12.0 +42.0
Typ.
Max.
Unit
2700
MHz dB dBm dBm
"0.5
dB dB/ºC mA
13.0 +28.5 +45.0 2.0:1 / 2.0:1 "0.25 -.012 380
450
*Two tone tests at P out = +13 dBm/tone, centered at 2400 MHz with 20 MHz separation
30
Output Power at P1dB @ +25ºC
IP3** vs. Frequency @ +25ºC
48
Gain vs. Frequency Over Temperature
15
28
46
Gain (dB)
IP3 (dBm)
29
45 44
14 -20ºC +25ºC
13
43 42 2300 2400 2500 2600 2700 2800
+85ºC 12 2300 2400 2500 2600 2700 2800
Frequency (MHz) **Two tone test, P out = +13 dBm/tone; with 20 MHz separation
Frequency (MHz)
27 2300 2400 2500 2600 2700 2800 Frequency (MHz)
Application Circuit
Return Loss vs. Frequency @ +25ºC
C2
0
Return Loss (dB)
P1 (dBm)
47
Vdd
-5
Output Input
-10
CR 1 RF IN
-15
L1
MwT
RF OUT
C1
C1
-20 2300 2400 2500 2600 2700 2800 C1 C2 L1 CR1
Frequency (MHz)
100 pF 0.22 uF 160 nH 8.0 V
Chip Capacitor Capacitor Printed or Wound Coil Zener Diode 50Ohm Microstrip Line
MPS-253011-02 Outline Drawing Packaging is interchangeable with MPS-253011-82 .15 MAX.
.430
.050 TYP. 2 PLCS.
GAP .005 TYP.
INPUT SIDE DOT .030 TYP. .270 .032 TYP. 2 PLCS. OUTPUT PAD GROUND PAD
INPUT PAD .030 TYP.
MicroWave Technology, Inc., 4268 Solar Way, Fremont, CA 94538 Tel: (510) 651-6700 Fax: (510) 651-2208 Web Site: www.mwtinc.com E-mail:
[email protected]
