Transcript
SCT12N60FD Triac
600V, 12A STANDARD TRIAC This device is suitable for low power AC switching application, phase control application such as fan speed and temperature modulation control, lighting control and static switching relay. 1 2 3
Features „ Repetitive Peak Off-State Voltage : VDRM=600V
Product Characteristics
„ R.M.S On-State Current : IT(RMS)=12A „ Gate trigger current : IGT=40mA max (Mode
-
TO-220F-3L
-
)
„ High Commutation: (dI/dt)C = 6.0A/ (Min)
Symbol
Rating
IT(RMS)
12A
VDRM
600V
Marking Diagram
Applications „ Switching mode power supply, light dimmet „ TV sets, stereo, refrigerator, washing machine „ Electric blanket, solenoid driver, small motor control „ Photo copier, electric tool
Ordering Information Device
Marking Code
Package
Packaging
SCT12N60FD
SCT12N60
TO-220F-3L
50 Units / Tube
Column 1 : Manufacture Logo Column 2 : Production Information : Factory Management Code - YMDD : Date Code(Year, Month, Date) Column 3 : Device code
Absolute Maximum Ratings (Limiting Values) Characteristic
Symbol
Value
Unit
Repetitive Peak Off-state Voltage
VDRM
600
V
RMS on-state current (full sine wave)
IT(RMS)
12
A
ITSM
126
A
I2t Value for fusing
I2t
78
A2s
Peak gate current
IGM
4
A
Peak gate power dissipation
PGM
5
W
PG(AV)
1
W
Tstg
-40 to +150
Tj
-40 to +125
Non- repetitive surge peak on-state current (full cycle, Tj initial = 25 )
Average gate peak dissipation Storage temperature range Operating junction temperature range
KSD-S0O001-000
1
SCT12N60FD Thermal Characteristics Characteristic
Symbol
Value
Maximum thermal resistance junction to case (AC)
Rth(j-c)
4.0
/W
Maximum thermal resistance junction to ambient (AC)
Rth(j-a)
60
/W
Electrical Characteristics (TJ=25
Unit
, unless otherwise specified)
Off Characteristics Characteristic
Symbol
Repetitive peak Off-state current
IDRM
Repetitive peak reverse current
IRRM
Test Condition
Min.
Typ.
Max.
Unit
VD = VDRM
-
-
5
uA
VR = VRRM
-
-
5
A
Min.
Typ.
Max.
Unit
IT = 17A
-
-
1.55
V
IH
VD = 12V, IT = 0.2A
-
-
60
mA
IGT ( - - )
VD = 12V, RL = 30
-
-
40
mA
-
-
-
-
mA
VD = 12V, RL = 30
-
-
1.3
V
0.2
-
-
V
Min.
Typ.
Max.
Unit
2000
-
-
V/ S
6.0
-
-
A/
-
-
50
A/ S
On Characteristics Characteristic Peak On-state voltage Holding current
Symbol VTM
Gate trigger current IGT ( ) Gate trigger voltage Gate Non-trigger voltage
VGT ( - - ) VGD
Test Condition
VD = 2/3 VDRM, Tj=125
Dynamic Characteristics Characteristic Critical rate of rise of Off-state Voltage Rate of Change of Commutation Current Critical rate of rise of on-state current Simple circuit for (dV/dt)S
Symbol (dV/dt)S (dI/dt)C dI/dt
Test Condition VD = 2/3 VDRM, Tj=125 (dV/dt)C=10V/ , Tj=125 f=120hz, IG = 2 IGT tr 100 , Tj=125
Simple circuit for (dI/dt)C vs (dV/dt)C
KSD-S0O001-000
Simple circuit for dI/dt
2
SCT12N60FD Electrical Characteristic Curves Fig. 2 IT(RMS) – TC
A
W
Fig. 1 P – IT(RMS)
Fig. 4 (dI/dt)C - (dV/dt)C
Fig. 5 IGT- Tj
Fig. 6 IT - IGT
A
Fig. 3 IT - VT
KSD-S0O001-000
3
SCT12N60FD Electrical Characteristic Curves Fig. 7 VGT- Tj
Fig. 8 IT - VGT
Fig. 9 IH- VT
KSD-S0O001-000
4
SCT12N60FD Package Outline Dimensions
KSD-S0O001-000
5
SCT12N60FD
The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice.
KSD-S0O001-000
6
