Preview only show first 10 pages with watermark. For full document please download

Download Datasheet For Sd112-45-11-221 By Advanced Photonix

   EMBED

Share

Transcript

Detector/Amplifier Hybrids With Feedback Resistor SD 112-45-11-221 PACKAGE DIMENSIONS INCH 2 1 3 4 TO-5 PACKAGE See Sheet 2 for Schematic and connection Diagram CHIP DIMENSIONS FEATURES • • • • Low noise Blue enhanced Feedback circuit High speed DESCRIPTION APPLICATIONS The SD 112-45-11-221 is a detector/amplifier hybrid that combines a silicon photodiode with an opamp with a feedback resistor and capacitor, available in a hermetic TO-5 metal can package. • Instrumentation • Industrial • Medical SPECTRAL SENSITIVITY ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED Voltage Supplies P Power Dissipation TSTG Storage Temperature TS Soldering Temperature* TYP ±5 MAX UNITS ± 15 V 360 -25 mW +100 +240 °C °C 350 300 6 Vs MIN Sensitivity (10 V/W) SYMBOL PARAMETER 400 250 200 150 100 50 ELECTRO-OPTICAL CHARACTERISTICS RATING SYMBOL f3db Gain S Vos Is Vn NEP IS VOSW CHARACTERISTIC Cutoff Frequency Transimpedance Gain Sensitivity Output Offset Voltage Power Supply Current Broadband Noise Noise Equivalent Power Supply Current Output Voltage Swing (TA)= 23°C, VS = ± 5V, RL > 1MW, UNLESS OTHERWISE NOTED TEST CONDITIONS l= 633 nm f= 0.01Hz to 135 Hz f= 0.01Hz to 135 Hz MIN 2.8x108 TYP 0.13 600 2.4x108 0.08 0.8 MAX ±1 0.9 52 3.5x10-14 850 950 0 to 4.7 0 to 4.7 UNITS KHz MW V/W mV mA uVrms W/√Hz uA V Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com 1200 1100 Wavelength (nm) 1000 900 800 700 600 500 400 300 200 0 * 1/16 inch from case for 3 seconds max. Detector/Amplifier Hybrids With Feedback Resistor SD 112-45-11-221 SCHEMATIC AND CONNECTION DIAGRAM 3 0.01 μF 4 1 2 0.01 μF Note: Components shown outside the dashed area are external to the device, and must be supplied by the user. 2