Download Datasheet For V802-100.0m By Connor-winfield

Transcript

LVCMOS VCXO Specification Model V802 Description: 2111 Comprehensive Drive 2111 Comprehensive Drive Aurora, Illinois 60505 Aurora, Illinois 60505 Phone: 630- 851- 4722 Phone: 630- 851- 4722 Fax: 630- 851- 5040 Fax: 630- 851- 5040 www.conwin.com www.conwin.com US Headquarters: 630-851-4722 European Headquarters: +353-61-472221 Features: The Connor-Winield, RoHS compliant, V802 is a 3.3V Voltage Controlled Crystal Oscillator (VCXO) with LVCMOS output and enable/disable function. The V802 is designed for use with applications utilizing a PLL system requiring low jitter and tight frequency stability. The surface mount package is designed for highdensity mounting and is optimum for mass production. CW 1116 100.0 V802 MHZ 3.3 Vdc Operation Absolute Pull Range (APR): ± 50 ppm Temperature Range: 0 to 70°C Low Jitter: <0.5ps RMS LVCMOS Output 5x7 mm SMT Package Tri-State Enable/Disable, Pad 2 Tape and Reel Packaging RoHS Compliant / Lead Free Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage (Vcc) Control Voltage (Vc) Minimum Nominal Maximum Units -40 -0.5 -0.5 - 85 4.6 Vcc + 0.5 °C Vdc Vdc Notes Operating Speciications Parameter Minimum Center Frequency: (Fo) 65 Operating Temp Range: 0 Supply Voltage: (Vcc) 3.135 Supply Current :(Icc) Jitter: Period Jitter Integrated Phase Jitter Typical SSB Phase Noise @ 100 MHz @ 10 Hz offset @ 100 Hz offset @ 1 KHz offset @ 10 KHz offset @ 100 KHz offset @ 1 MHz offset Start-Up Time - Nominal Maximum Units 3.3 - 130 70 3.465 40 MHz °C Vdc mA 3.0 0.5 5.0 1.0 ps RMS ps RMS -55 -85 -115 -135 -150 -150 - 10 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz ms Notes 1 Input Characteristics Parameter Control Voltage Range (Vc) Absolute Pull Range (APR) Monotonic Linearity DC Input Impedance Modulation Bandwidth (3dB) Enable Input Voltage (High) (Vih) Disable Input Voltage (Low) (Vil) Minimum Nominal Maximum Units 0.3 ±50 -10 10 2.4 - 1.65 60K - 3.0 10 0.4 Vdc ppm % Ohm KHz V V Notes 4 4 Notes 2 3 LVCMOS Output Characteristics Parameter Load Voltage (High) Voh (Low) Vol Duty Cycle at 50% Level Rise / Fall Time: 20% to 80% Minimum Nominal Maximum Units 2.4 45 - 15 50 - 0.4 55 2 pF V V % ns Package Characteristics Package Bulletin Page Revision Date VX514 1 of 2 04 21 Apr 2011 Hermetically sealed ceramic surface mount package with case ground metal cover Notes: 1. BW= 12 KHz to 20 MHz, 2. Absolute Pull Range (APR) is the minimum guaranteed pull range of the VCXO under all conditions over lifetime operation including calibration @ 25°C,frequency stability vs. the change in temperature, frequency vs. change in supply voltage, frequency vs. change in load, shock and vibration and 10 years aging. The APR is referenced to (Fo). Positive transfer function. 3. Measured from pin 1 to ground. 4. Oscillator output is enabled with no connection on pad 2. Speciications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winield Corporation 2111 Comprehensive Drive Aurora, Illinois 60505 Phone: 630- 851- 4722 Fax: 630- 851- 5040 www.conwin.com Environmental Characteristics Vibration: Vibration per Mil Std 883E Method 2007.3 Test Condition A. Shock: Mechanical Shock per Mil Std 883E Method 2002.4 Test Condition B. Soldering Process; RoHS compliant lead free. See soldering proile on page 2. Package Layout Ordering Information V802 - 100.0M VCXO SERIES CENTER FREQUENCY Suggested Pad Layout 0.055 (1.40mm) 0.275 (7.00mm) 0.200 (5.08mm) 0.100 (2.54mm) CW 0.197 (5.00mm) Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. 1116 V802 100.0M 6 4 2 3 0.079 (2.0mm) Top View 0.165 (4.2mm) 0.102 (2.6mm) Dimensional Tolerance +/-0.008 (+/-0.2mm) 0.700 (1.80mm) 5 1 Bypass Capacitor 0.01uF Ground 0.070 (1.78mm) Pad Connections Typical Phase Noise 1: 2 3: 4: 5: 6: Typical Phase Noise V802-100.0M Control Voltage (Vc) Enable / Disable Ground Output Q N/C Supply Voltage (Vcc) Enable / Disable Function Function: High or Open Low Test Circuit Outputs Enabled Disabled (High Impedance Output Waveform N/C 6 5 4 1 2 3 Control Voltage Enable / Disable Solder Proile Tape and Reel Dimensions Temperature 260°C 260°C 220°C 180°C 150°C 120°C 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. Bulletin Dimensional Tolerance: ±.02” (.508mm) ±.005” (.127mm) Page Revision Date Speciications subject to change without notice. All dimensions in inches. © Copyright 2011 The Connor-Winield Corporation VX514 2 of 2 04 21 Apr 2011