Preview only show first 10 pages with watermark. For full document please download

Download Document

   EMBED


Share

Transcript

OPERATORS PRONEWS EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 DECEMBER 2015 Corporate North & Latin America Asia & Pacific Other regional offices +32 4 361 7000 +1 973 575 7811 +852 2914 2501 www.evs.com/contact EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 TABLE OF CONTENT 1. INTRODUCTION ................................................................................................................................ 3 2. NEW OPERATIONAL FEATURES OF MULTICAM 14.01 ................................................................ 4 3. 4. 5. 2.1. Dual LSM 4 2.2. Dual LSM – Individual Operational parameters 6 2.3. Camera mapping and clip Operations 7 2.4. VGA Screen 8 NEW ENGINEERING FEATURES IN MULTICAM 14.01 .................................................................. 9 3.1. New internal multiviewer layout for full-screen monitoring of 1 channel 9 3.2. XAVC Intra HD Native Support on XT3 / XS 9 3.3. XDCAM + LoRes Encoding 9 3.4. New Epsio Protocol Setting 10 3.5. Simplified SLSM Configurations 10 3.6. ChannelMAX 10 3.7. New Configurations with Multicam 14 11 TRUCK MANAGER .......................................................................................................................... 11 4.1. Introduction 11 4.2. Main Features 11 SOFTWARE DOWNLOADS AND MANUALS ................................................................................. 12 DECEMBER 2015 EVS TRAINING Page 2 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 1. INTRODUCTION This newsletter details the latest features and functionality of Multicam version 14.01 New Operational features A Key new feature introduced with Multicam 14.01 is Dual-LSM mode which enables two operators to work more independently on one EVS XT3 ChannelMAX Server, each using their own LSM Remote and LSM Connect. More SuperMotion cameras are supported in 14.01, including double 8x SuperMotion cameras, and an improved lever range for super motion playback. New Engineering features Key engineering features of the new release include:      New internal multiviewer layout for full-screen monitoring of a single channel XAVC Intra HD Native Support on XT3 / XS for recording & playout XDCAM + LoRes encoding can be activated with an XT3 version 4.00 hardware (Hardware with H3XP board and XDCAM daughter modules) New Epsio Protocol to improve Epsio’s integration Simplified Supermotion settings Truck Manager The Truck Manager product is designed to help minimise configuration and support time by providing a centralized setup tool for EVS products in an OB Production Truck. Key features include:      Auto-detection of EVS products on the OB truck’s Ethernet management network Device, IP address and server settings can be configured from a single user interface Truck configurations can be created and managed offline Import/Export of production configurations to save time Product compatibility is checked automatically and configurations of EVS products and settings can be centrally optimized DECEMBER 2015 EVS TRAINING Page 3 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 2. NEW OPERATIONAL FEATURES OF MULTICAM 14.01 2.1. DUAL LSM Dual LSM mode allows two operators to use the same XT3 server. Each operator can then manage their own LSM environment with their own individual settings and defined set of camera inputs. Dual LSM mode is only available when using the ChannelMAX option of the XT3 server, equipped with the latest hardware, combined with the Dual LSM license code. For more information about the ChannelMAX option … see below.  Dual LSM features  Two possible configurations are currently supported :  8 IN + 4 OUT: offers each operator a 4 IN + 2 OUT configuration (as shown in the picture above).  6 IN + 6 OUT: each operator can use a 3 IN + 3 OUT configuration  Multicam 14.01 offers the ability of operation with only 2 remotes - one remote per operator. The PGM outputs are always evenly split between operators (2 OUT for operator 1 and 2 OUT for operator 2 or 3 OUT for operator 1 and 3 OUT for operator 2).  Dual-LSM enables at least 2 outputs per user, which can be used in PGM/PRV or 2PGM mode.  in 4 IN + 2 OUT mode for each operator: a mix is available between two outputs for each operator (PGM1+2 or PGM3+4).  in 3 IN + 3 OUT mode for each operator it is only possible to mix between:  PGM 1 and 2  PGM 4 and 5 DECEMBER 2015 EVS TRAINING Page 4 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01  No mix is available for PGM3 or PGM 6   Muilticam 14.01 Limitations for Dual LSM: Playlists are supported on both remotes but with some limitations for Operator 2.  no “Clear Unavailable” function allowed from the 2nd user seat, as this affects all playlists  no “Replace” function is possible, as this is using PGM 1 and LOOP IN controlled by the fist operator.  Timeline editing, Paint Target and special effects are only available for Operator 1.  Hypermotion camera control is available only on Remote 2 (Operator 2).  Dual LSM Configuration Dual LSM mode can be activated from the server configuration VGA, the Web Configuration or the LSM Remote simply by setting the parameter Dual LSM mode to yes. (note: this requires option code 116 on the server, as well as ChannelMAX Option) DECEMBER 2015 EVS TRAINING Page 5 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 Once this is enabled, a new tab is available to define the individual settings for each operator. DUAL LSM – INDIVIDUAL OPERATIONAL PARAMETERS 2.2. Each operator has access through his remote to his own personal settings. Here’ an overview of these individual parameters.  Clips section  Automake clip (8 max)  Mark cue points  Freeze on cue points  Playlist section  Video effect duration  Audio lock to video  Audio effect duration  Default playlist speed  Insert in playlist  Advanced audio editing    Extend split transition Load playlist Push section  Push target 1  Push target 2 DECEMBER 2015 EVS TRAINING Page 6 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01  EVS controller section  Effect duration for take  Lever engage mode  Second lever range  Recall clip toggle 2.3. CAMERA MAPPING AND CLIP OPERATIONS  Camera Mapping Each operator is able to map the cameras they wish to use through the ABCD buttons of their remote. By default the mapping is ABCD for Operator 1 and EFGH for Operator 2. Operator 1: Operator 2: There is a new configuration screen available on the remote that allows the operator to select his cameras. This can be done by pressing one of the A/B/C/D keys and subsequently pressing one of the F keys to associate the relevant camera. Operator 1: Operator 2: Once this selection has been done by both operators, it is reflected in the operational LCD screens of their remotes as shown below. Operator 1 has selected cameras A, C, E and G and operator 2 the cameras B, D, F and H. Note that there is nothing to prevent the same camera from being selected by both operators. Result: DECEMBER 2015 EVS TRAINING Page 7 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01  Operations on Clips   2.4. LSM ID’s are global in Multicam  Pages, banks, clips are shared between both LSM operators. For instance a clip made by operator 1 will be seen and will be available to operator 2. When creating a clip, this is done using the Automake rules of the operator that creates the clip VGA SCREEN There are no changes here compared to the previous versions of Multicam, and thus the two views (4 CAM or 12 CAM view) are both available in the VGA screen. As only one VGA screen exists, the Dual LSM operations have been optimized with the LSM Connect tablet as explained in the Live Tools section of this Operators’ Pro News. DECEMBER 2015 EVS TRAINING Page 8 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 3. NEW ENGINEERING FEATURES IN MULTICAM 14.01 3.1.    NEW INTERNAL MULTIVIEWER LAYOUT FOR FULL-SCREEN MONITORING OF 1 CHANNEL All Record (REC) INPUT and (PGM) OUTPUT channels can be displayed through the internal Multiviewer. With the Hardware version 4.00 (with the MV4 Multiviewer hardware), it is now also possible, to select a full screen layout from a single source. This is useful in Dual LSM configurations, to provide a dedicated OSD output of a player channel when the OSD output of the given channel on the codec module is not available (e.g. PGM 3 and 4 as shown in the picture below). The same feature is used in UHD-4K workflows to show the complete 4K space in a single HD output of the Multiviewer as a single feed. 3.2. XAVC INTRA HD NATIVE SUPPORT ON XT3 / XS Multicam 12.02 previously supported XAVC Intra native playout while running in AVC-Intra mode. From Multicam 14.01 onwards, XAVC-Intra HD is now also supported natively for recording and playback workflows (720p / 1080i / 1080p). 3.3. XDCAM + LORES ENCODING If the server is hardware edition 4.00 (which means equipped with an H3XP board) and equipped with the XDCAM option, it is now possible to activate a dual encoding of XDCAM + Lores mode. DECEMBER 2015 EVS TRAINING Page 9 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 3.4. NEW EPSIO PROTOCOL SETTING The new Epsio protocol an improved Epsio’s integration with the Multicam LSM in terms of communication and interactivity (e.g. the indications displayed in the remote’s LCD will be defined by Epsio). This brings with it an increased flexibility and dynamic capabilities from the LSM operators seat. 3.5. SIMPLIFIED SLSM CONFIGURATIONS The SLSM settings have been re-arranged making the configurations easier and faster.    Number of cameras: number of SLSM cameras in the given configuration. A SLSM camera corresponds to one logical record channel (CAM A for example) SLSM Speed: Frame rate at which the SLSM camera records the incoming feeds, expressed in multiples of the standard frame rate of 25 FPS (at 50Hz) or 30 FPS (at 59.95 Hz), or 60FPS in progressive. On 3G SDI: specifies whether two SLSM phases are connected to the EVS server using a single 3G-SDI interface. On individual 1.5 Gbps SDIO On-3G SDI (Dual-Stream) 3 GS DI 3.6. CHANNELMAX Channel MAX (12 channel configurations) had already been introduced with the previous version of Multicam 14.00 but was only available in some LSM modes as enhanced SuperMotion support and also in dense Spotbox modes.  Multicam LSM mode: With the latest release of Multicam we are now also introducing the Channel MAX configurations in regular LSM operations and parallel configurations with either IPD or third party protocols. This is the case for the following configurations:  10 IN + 2 OUT  8 IN + 4 OUT  6 IN + 6 OUT  XDCAM Only mode: Three new configurations are available, which lift the limitation we had on the previous version in terms of Mix on one channel. Those configurations are as follows:  10 IN + 1 OUT  8 IN + 2 OUT  6 IN + 3 OUT DECEMBER 2015 EVS TRAINING Page 10 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 3.7. NEW CONFIGURATIONS WITH MULTICAM 14 From new supported configurations please refer to the following page. 4. TRUCK MANAGER 4.1. INTRODUCTION In the context of increasingly complex OB production truck environments, which utilise multiple EVS products, the Truck Manager solution is designed to help minimize configuration and support time by providing a centralized setup tool. 4.2. MAIN FEATURES  Auto-Detection of EVS Products Truck manager automatically detects all EVS products in the OB truck’s ethernet management network – whether that be servers, LSM Remotes, XFile3, MultiReview or LSM Connect. Configuration and IP address management can then all be controlled centrally.  Configuration of Device/Server Settings All device and server settings can be configured – either globally or individually – using the Truck Manager Wizard. The user proceeds through device selection, video and audio settings and network configuration.  Offline Configuration Complex setups can be created offline, in advance, and then applied onsite to the truck in a matter of minutes. This is particularly useful when preparing for events, where the number and type of devices that will be available DECEMBER 2015 EVS TRAINING Page 11 of 12 EVS VIDEO SERVERS SYSTEM & SOFTWARE PACKAGE 14.01 is known – meaning the setup can be configured before travelling and then applied immediately on arrival. You can apply a show config to the trucks equipment complement, saving time and getting to production faster.  Import/Export Configurations Truck Manager configurations can also be imported or exported, meaning that setups can be quickly transferred between events or trucks. This can be useful e.g. where different trucks are used to cover matches during a sports season where the production setup is always the same.  Compatibility Optimization Truck Manager automatically checks that all EVS products and devices are compatible, and that their interrelationships are optimized. For instance, if the software versions of different products are incompatible, Truck Manager will highlight this and prompt the user to update the setup accordingly. For more information about truck Manager you can refer to the Tutorial available on EVS’ website. 5. SOFTWARE DOWNLOADS AND MANUALS Refer to the Download Page of the EVS Website and the Technical area for manuals, release notes and software packages to download. DECEMBER 2015 EVS TRAINING Page 12 of 12