Transcript
LED technology THE ART OF LIGHTING A0139796 Iowa-2SQ White WW 2.1 Watt LED 133Lm 3000K Square white housing Lamptype: recessed down-light Reflector: with 21.9° homogeneous light beam Housing: solid Aluminium white powdercoated RAL9003 Weight: 0.11 Kg Dimensions fixture: 38 x 40 mm Fixture Classification Front: IP-44 Class III Fixture Classification Backside: IP-40 Class III Operating Power: constant current 700mA Excluded (external) LED-driver Advised constant current LED-drivers: 700mA (dimmable or non dimmable) see next pages A9950005 Non Dimmable @230VAC 700mA 12W / Vf: 18 @110VAC 700mA 6W / Vf: 8
Vf 700mA
A9950010 Dimmable by push button 110-230VAC 350mA 15W / Vf: 2-43
3
Power
40
excluded
0.11
A9950360 EldoLED SoloDrive-30W SL0361 A Dimmable by 1-10V (1 LED group) 110-230VAC 200-1050mA 30W / Vf: 2-55 The constant current output is standart set to 350mA For 700mA setting, the toolbox A9915056 is required A9950044 EldoLED PowerDrive-50W (PWR0562 A1) Dimmable by 3 DMX-Adresses (3 LED Groups) The constant current output is standart set to 350mA For other settings, the toolbox Pro A9915056 is required A9950045 EldoLED PowerDrive-100W (PWR16 A1) Dimmable with 4 separately LED outputs controllable by 4 DMX- or 4 DALI adresses or 1-10V The constant current output is standart set to 350mA and can be be set at the driver from 200mA to 700mA
Always disconnect the mains of the LED driver before plugging or unplugging the LED`s !! The LED`s will be damaged or destroyed because of the high voltage present on the driver output when there is no load connected. Connect the main after all Led`s and plugs are connected !
Height Iowa-2 WW 21.9°
Dimensions in mm fixture inclusiv: +/- 30cm cable with mounted male plug
,30 ø
28
40
38
40
Avg.
Nadir.E
0.5m
0.19m 1456 Lx 2050 Lx
1.0m
0.39m 364 Lx 512 Lx
1.5m
0.58m 162 Lx 228 Lx
2.0m
0.77m
91 Lx 128 Lx
2.5m
0.97m
66 Lx
185 Lx
3.0m
1.16m
40 Lx
57 Lx
38
INDOOR RATED
Øm
Recessed downlights
A
Non dimmable Driver Driver included 1x 700mA serial connection box with 100cm cable open-end
!
A9950005 Constant Current LED Driver 700mA
SEC
Input 100-240VAC 50/60Hz Cos 0.95 Uout: 8-18VDC Pout: 6-12W Ta: -20°C +50°C
+
!
A9950005 Constant current LED-Driver @230VAC 700mA 12W / Vf: 18 @110VAC 700mA 6W / Vf: 8
!
@230VAC Load min. 1x Iowa-2SQ & max. 5x Iowa-2SQ @110VAC Load min. 1x Iowa-2SQ & max. 2x Iowa-2SQ To avoid damages to the LED, all cables & plugs must be connected before switching on the power !
B
A9920563 3-p serial connection box with +/- 100cm open end cable
-
L N
PRI L N
100-240V AC
fixture inclusiv: +/- 40cm cable & mounted male plug
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
Dimmable by A9950010 & pulse switch A9920563 3-p serial connection box with +/- 100cm open end cable
!
!
+
+
1-10V
LED Driver A9950010
A9920563 3-p serial connection box with +/- 100cm open end cable
+ +
A9950010 Constant current LED Driver Output currency must be set to 700mA by internal dipswitches
-
SEC
fixture inclusiv: +/- 40cm cable & mounted male plug
-
SYNC
-
ON
1 2 3 4 5 6
Dipswitch for selection output currency Set to 700mA: Switch 5 & 6 to “ON“
PUSH L PRI N L
L
!
N
100-240V AC More drivers (max.10) can be connected and controlled by one Pulse Switch, using the sync. connection cable A9950017 Synchronise conection-cable to connect the next driver
Pulse Switch: • Short push to turn ON and OFF • Push and hold to increase or decrease light intensity
!
! Fixture inclusiv: +/- 10cm cable & plug cable one side open end
Fixture inclusiv: +/- 40cm cable & mounted male plug
@230VAC Load min. 1x Iowa-2SQ & max. 7x Iowa-2SQ @110VAC Load min. 1x Iowa-2SQ & max. 4x Iowa-2SQ
A9920563 3-p serial connection box with +/- 100cm open end cable
!
To avoid damages to the LED, all cables & plugs must be connected before switching on the power !
D
1-10V Dimmable by Rotary Dimmer
1-Channel 1-10V-Control (Jung 240-10)
+ -
A9920563 3-p serial connection box with +/- 100cm open end cable
!
~ ~ 0-10V
Constant Current output is standart set to 350mA For 700mA setting, the toolbox A9915056 is required
A9920563 3-p serial connection box with +/- 100cm open end cable
L
N 120-277 VAC L
A9950360 EldoLED SoloDrive-30W SL0361 A Dimmable 1-10V LED constant current driver max. 30W 1 LED group 200-1050mA / 2-55Vf
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
! !
LED output LEDcode NTC
1-Channel 1-10V-Driver - +
LEDcode Toolbox-Pro NTC (connection) Fixture inclusiv: +/- 10cm cable & plug cable one side open end
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
Load min. 1x Iowa-2SQ & max. 7x Iowa-2SQ To avoid damages to the LED, all cables & plugs must be connected before switching on the power !
!
E
Dimmable with EldoLED 3-channel Driver and DMX-controller
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
A9920563 3-p serial connection box with +/- 100cm open end cable
! !
A9950044 EldoLED PowerDrive-50W (PWR0562 A1) 3 separately Dimmable LED outputs controllable by 3 DMX-Adresses The constant current output is standart set to 350mA For other settings, the toolbox Pro A9915056 is required
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
A9920563 3-p serial connection box with +/- 100cm open end cable
! !
! +-
+-
+-
LEDcode Toolbox-Pro (connection) NTC (connection) +DMXControl + - GND + -
ART-8D DMX-Control Dimming each group separatly and creating 8 dimming scenes
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
24VDC PowerSupply
N L 120-277 VAC
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
Max. length DMX-cable 100-200 mtr
included IR-Control Up to 8 LED-Groups can be controlled by the ART-8D DMX-Controler Each group can be dimmed separatly and 8 dimming scenes can be recorded
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
A9920563 3-p serial connection box with +/- 100cm open end cable
! !
Fixture inclusiv: +/- 10cm cable & plug cable one side open end Fixture inclusiv: +/- 40cm cable & mounted male plug
!
Load max. 7x Iowa-2SQ to one output-channel and total max. 21 Iowa-2SQ to one driver and to avoid damages to the LED, all cables & plugs must be connected before switching on the power !
A9920563 3-p serial connection box with +/- 100cm open end cable
!
A9920563 3-p serial connection box with +/- 100cm open end cable
F
Dimmable with EldoLED 4-channel Driver and DMX-controller
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
3 5 0A
A9950045 EldoLED PowerDrive-100W (PWR16 A1) 4 separately Dimmable LED outputs controllable by 4 DMX- or DALI Adresses or 1-10V The constant current output is standart set to 350mA and must be set to 700mA All settings, can be changed by 3 buttons (M - +) below the LCD
A9920563 3-p serial connection box with +/- 100cm open end cable
The PowerDrive-100 can be set to different control-modes;
A9920563 3-p serial connection box with +/- 100cm open end cable
!
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
A9920563 3-p serial connection box with +/- 100cm open end cable
• 1 DMX-Channel: Fader-1 controlls all 4 LED-Groups • 2 DMX-Channels: Fader-1 controlls LED-Group 1&2 Fader-2 controlls LED-Group 2&3
!
!
• 4 DMX-Channels: Fader-1 controlls LED-Group-1, Fader-2 controlls LED-Group-2, Fader-3 controlls LED-Group-3 Fader-4 controlls LED-Group-4
Fixture inclusiv: +/- 40cm cable & mounted male plug
A9920563 3-p serial connection box with +/- 100cm open end cable ART-8D DMX-Control Dimming each group separatly and creating 8 dimming scenes
DMXControl GND
-+
+-
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
!
24VDC PowerSupply
Max. length DMX-cable 100-200 mtr
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
Sync -+
GND
GND
-+
A9920563 3-p serial connection box with +/- 100cm open end cable
!
! 120-277VAC LN
A9920563 3-p serial connection box with +/- 100cm open end cable
4 LED groups set to 700mA each: max.55Vf
Fixture inclusiv: +/- 40cm cable & mounted male plug
+- +-
DALI
- + LEDcode NTC (connection)
+ -
Ext in
!
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
A9920563 3-p serial connection box with +/- 100cm open end cable
!
included IR-Control Up to 8 LED-Groups can be controlled by the ART-8D DMX-Controler Each group can be dimmed separatly and 8 dimming scenes can be recorded
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
A9920563 3-p serial connection box with +/- 100cm open end cable
!
! Fixture inclusiv: +/- 40cm cable & mounted male plug
A9920563 3-p serial connection box with +/- 100cm open end cable
Fixture inclusiv: +/- 40cm cable & mounted male plug
!
A9920563 3-p serial connection box with +/- 100cm open end cable
!
Fixture inclusiv: +/- 10cm cable & plug cable one side open end
A9920563 3-p serial connection box with +/- 100cm open end cable
!
!
!
A9920563 3-p serial connection box with +/- 100cm open end cable
Load max. 8x Iowa-2SQ to one output-channel and total max. 32 Iowa-2SQ to one driver and to avoid damages to the LED, all cables & plugs must be connected before switching on the power !
Fixture inclusiv: +/- 40cm cable & mounted male plug
