Transcript
nl
ow
D a .v
nd
or
b en
.b re
4. M button (memory/clock setting)
e
5. FUNCTION button
- Remove the spacer tab before use Remove the spacer tab when you use the remote control for the first time. To remove the tab, pull it in the direction of the arrow in the illustration as shown.
6. iPod/iPhone/iPad Socket 7. SNOOZE/DIMMER button 8. SLEEP Button 9. ALARM1/MEMO- button
13.
- Replacing battery for the remote control 1. Press the stopper and pull out the battery holder. 2. Install 1pc “CR2025” lithium battery according to the polarity diagram on the battery compartment. 3. Insert the battery holder into the remote control.
Front View
10. ALARM2/MEMO+ button button
w
3. EQ button (equalizer)
button
w
2. VOLUME+ / - buttons
12. TUNING/
w
Main unit Top View
button (STANDBY)
11. TUNING/
m
PRODUCT DESCRIPTION 1.
fro
User Manual Docking for iPod/iPhone/iPad Clock Radio PLL
d
M-158 IP
Remote control R1. STANDBY button R2. FUNCTION button R3. button (mute) R4. button (play/pause) R5. MENU button (return to previous menu in iPhone/iPod mode) R6. button (navigate menu in iPod/iPhone/iPad mode) R7. button (navigate menu in iPod/iPhone/iPad mode) R8. ENTER button (confirm a selection in iPod/ iPhone/iPad mode) R9. button (fast backward) R10. button (fast forward) R11. M/Clock button (memory/clock setting) R12. VOLUME+ / - buttons R13. ALM.1/MEMO- button (alarm 1) R14. ALM.2/MEMO+ button (alarm 2) R15. SLEEP button R16. SNZ button (snooze)
de
When you unpack your new iPod/iPhone/iPad clock-radio, make sure that you have removed all the accessories and information papers: - Docking Clock Radio PLL for iPod/iPhone/iPad - Remote Control - AC adaptor - 6 pieces iPod/iPhone/iPad interchangeable adaptors - 1 piece Dust Cover - iPad table bracket - User manual
oa
UNPACKING YOUR UNIT
button (play/pause)
14. LCD display 15. Remote sensor 16. Speakers Back View
17. FM Wire Antenna iPod/iPhone/iPad not included
18. VIDEO OUT jack 19. AUX IN jack 20. DC input (AC adaptor jack) 21. Battery Backup Compartment
Please read the instruction carefully before operating the unit. English
LCD DISPLAY
D1.
- Alarm #1 wake to buzzer - Alarm #2 wake to buzzer - Alarm #1 wake to iPod/iPhone/iPad - Alarm #2 wake to iPod/iPhone/iPad - Alarm #1 wake to radio - Alarm #2 wake to radio D2. -iPod/iPhone/iPad mode playback D3. - Radio mode D4. - AUX IN mode D5. Equalizer modes D6. Volume D7. - mute D8. SNOOZE D9. SLEEP D10. Memory D11.Time or radiofrequency display D12. FM Stereo D13. Radio frequency unit D14. “PM”-12hr time mode display
POWER SUPPLY Using the AC adaptor This AC adaptor operates on AC100-240V~50/60Hz. • The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V~50/ 60Hz and should only be connected to a mains supply within these parameters. • Use the supplied AC adaptor only. Using any other AC adaptor could damage the unit. Cautions: - The included AC adaptor is for use with this unit only. Do not use it with other equip ments. - When the unit is not going to be used for long time, disconnect the AC adaptor from the AC outlet. - Be sure to use it near the wall outlet. If a malfunction occurs, disconnect the plug from the wall outlet at once. - When the AC adaptor is plugged in, the apparatus is not completely disconnected from the main power source, even when the unit is turned off. - AC adaptor is used as the disconnect device. It shall remain readily operable and should not be obstructed during intended use. To disconnect the apparatus from sup ply mains, completely disconnect the AC adaptor of the apparatus from the mains socket outlet GB - 3
DS-2765B IB MUSE 001 REV0 GB.ind1
1
GB - 1
GB - 2
Battery backup system DC power: 2x1.5V, battery type AAA/R03/UM4(not provided) for clock and alarm time backup system. An alkaline type battery is recommended. For optimum performance, this battery should be replaced every 6 months. BACKUP SYSTEM: All clock settings will be kept in memory; however, the clock time may require adjustment for exact accuracy. If the backup battery is not installed, the display will show the clock flashing to indicate that you have to reset the time and the alarm. NOTE: When the battery backup is functioning, the display has no backlight.
5. Press M button (5/R2) to complete time setting. NOTE: With clock display blinking, if no button is pressed within 8 seconds, it will return to previous clock display.
BASIC OPERATION Turn on the unit The unit is in clock mode when it is plugged in, press turn on or turn off the unit.
STANDBY button (1/R1) to
Operating mode selection (FUNCTION) Press FUNCTION button (5/R2) repeatedly to select iPod/iPhone/iPad, AUX or Radio mode. Sound volume Press VOL +/- button (2/R12) to adjust sound level. There are a total of 32 volume levels. Press button (R3) to cut off the sound temporarily, press this button again to resume the sound. Equalizer When listening to the radio, iPod/iPhone/iPad or other music source from AUX IN, press the EQ button (3) repeatedly to select different modes: CLASSIC, ROCK, POP, JAZZ, X-B (bass boost) or EQ off. Display dimmer In standby mode, press the SNOOZE/DIMMER button (7) repeatedly will change the backlight brightness of the display. There are 3 levels: low, medium, and high.
TIME SETTING Current time When used for the first time, or if the mains plug has been removed with no backup battery inside, the clock display will blink. 1. In Standby mode, Press the M button (4/R11) on the unit, the clock blinks on the display. 2. With clock display blinking, press FUNCTION button (5/R2) to select 12 or 24 hour format. 3. Press the M button (4/R11), the hour digits will flash, set the hour with (11/R9) or (12/R10) button. 4. Press the M button (4/R11) to save the hour setting, the minute digits flash Set the minutes with (11/R9) or (12/R10) button. GB - 4
SLEEP (Automatic turn off) In sleep mode, the unit will turn off automatically after a specified time. Note: Sleep time can only be set when the unit is turned ON. You can select a duration in minutes before the unit turns off automatically. Press SLEEP button (8/R15) repeatedly to select 90-80-70-60-50-40-30-20-10 or 00 minutes, then release SLEEP button (8/R15), “SLEEP” shows on display. NOTES: - To turn off the unit before the SLEEP activates, press STANDBY button (1/R1), or press SLEEP button (8/R15) repeatedly until value is adjusted to “00”. It will return to normal display after 5 seconds, the sleep function will be cancelled and “SLEEP” icon will not be displayed. - If the playing time from your iPhone or other player is shorter than the selected sleep time, the music will stop at the end of the playing time.
ALARM SETTING This unit can be set for two different wake up times which you can choose to use independently or simultaneously ALARM1, ALARM2 or both ALARM1 and ALARM 2. Alarm 1 or Alarm 2 setting 1. In standby mode, press ALARM 1 (9/R13) or ALARM 2 (10/R14) button, alarm type will flash on display. Press (11/R9) or (12/R10) button to select to wake up by buzzer, iPod/iPhone/iPad, or radio. The icon “ ”/“ ”, “ ”/” ” or “ ”/ “ ” will show on display accordingly. -“ ” or “ ” (wake up by buzzer): “Beep“ sound comes when the alarm time is reached. -“ ” or ” ” (wake up by iPod/iPone/iPad): Follow the procedure in “PLAY YOUR DOCKABLE iPod/iPhone/iPad”. The iPod/iPhone/iPad will start playing automatically when the alarm time is reached and the unit is off. -“ ” or “ ” (wake up by radio): Follow the procedure in “LISTENING TO THE RADIO” to select your desired radio station. The radio will turn on automatically when the alarm time is reached and the unit is off. 2. Press ALARM 1 (9/R13) or ALARM 2 (10/R14) button again, the hour digit flashes on display. Press the (11/R9) or (12/R10) button to adjust the hour. 3. Press ALARM 1 (9/R13) or ALARM 2 (10/R14) button again, the minute digit flashes on display. Press the (11/R9) or (12/R10) button to adjust the minutes. 4. Press ALARM 1 (9/R13) or ALARM 2 (10/R14) to save the setting of alarm 1 or alarm 2. The display will resume to the current time. To check the alarm settings In standby mode, press ALARM 1 (9/R13) or ALARM 2 (10/R14) button. Time and alarm source of the corresponding alarm are displayed for 5 seconds.
GB - 5
2011-6-29
14:26:05
ow
D iPod/iPhone/iPad interchangeable adapter This system includes 6 different adapters designed to allow you to securely connect any “dockable” iPod/iPhone/iPad model to the docking station. Refer to the chart below to select the proper adapter for your particular iPod/iPhone/iPad model and insert that adapter into the docking station before connecting your iPod/iPhone/iPad. NOTE: No adapter is provided for the 3G (third generation) iPod. Please use that adapters that were included with these iPod/iPhone/iPad at time of purchase. They will fit properly into the docking station of this system. We have also included one flat adapter with no opening at all. This serves as a dust cover that can be inserted in the docking station if no iPod/iPhone/iPad will be connected to the system for an extended period of time.
nl oa
iPod/iPhone/iPad Model
d
de 15
fro
19
m a .v
w
w
w
iPod/iPhone/iPad Model
15
nd or
b en
Turning off Alarm The alarm is programmed to run for 59 minutes and triggers progressively. Once the alarm 1 or alarm 2 is activated, corresponding alarm indicator “ ”/“ ”, “ ”/” ” or “ ”/“ ” will flash on display, 1. In wake up mode, to temporarily stop alarm, press the SNOOZE button (7/R16). The alarm will resume to the previous playing mode after 9 minutes. “ ”/“ ”, “ ”/ ” ” or “ ”/“ ” and “SNOOZE” are on display. 2. To stop the alarm for 24 hours, press Standby button (1/R1), “ ”/“ ”, “ ” /” ” or “ ”/“ ” remains displayed. The alarm will trigger at the preset time one day later. 3. To turn off the alarm permanently, in standby mode, press and hold ALARM 1 (9/ R13) or ALARM 2 (10/R14) until “ ”/“ ”, “ ”/” ” or “ ”/“ ” disappears. NOTE: - You can adjust the wake up sound level by VOLUME+/- button on wake to iPod/ iPhone/iPad or radio modes. - But since this is a progressive alarm, the sound will be louder and louder. You could decrease the volume after the alarm reaches to its max volume level (24).
.b re
LISTEN TO YOUR iPod/iPhone/iPad
e
IMPORTANT The docking station in this system follows the Apple “Universal Dock” design. This system can be fitted to different iPod/iPhone/iPad model. Play your iPod/iPhone/iPad on the main unit 1. Connect your iPod/iPhone/iPad to the socket of the unit. 2. Press the STANDBY button (1/R1) to turn on the unit. 3. Press the FUNTION button (5/R2) repeatedly to select iPod/iPhone/iPad mode. The display indicates “iPhone”. 4. Press button (13/R4) to play or pause. Press and hold button (13/R4) for 5 seconds to enter the iPod/iPhone/iPad sleep mode. 5. Select the previous or next track by pressing (11/R9) or (12/R10) button, press and hold (11/R9) or (12/R10) on the unit to review or fast forward. 6. Press VOL + / - buttons (2/R12) to adjust sound level. * Buttons on remote conrol for iPod/iPhone/iPad playing MENU button (R5): Press to: return to previous page of menu. or button (R6 or R7): press to select a menu item. ENTER button (R8): press to confirm a selection (open a folder or start playing a selected track).
15 4
iPad
iPad
Made for iPod, iPhone and iPad
iPhone call pick up 1. When phone call coming in, the music from the docking iPhone will pause automatically. 2. Incoming call ring comes out from the unit speaker. 3. You can take iPhone from the unit and pick up phone call. 4. After finish your call, connect back the iPhone to the socket, it will resume the playback of iPhone. Charge your iPod/iPhone/iPad While your iPod/iPhone/iPad is docked on the system, its battery recharges automatically until fully charged. GB - 6
LISTEN TO THE RADIO
GB - 7
SPECIFICATIONS
Manual operation 1. Press STANDBY button (1/R1) to turn on the unit. 2. Press FUNCTION button (5/R2) to select the RADIO mode. The display indicates “FM” 3. Press (11/R9) or (12/R10) to tune to a desired station. Automatic search operation Press and hold (11/R9) or (12/R10) button for approx. 2 seconds to start searching in the chosen direction. The automatic searching operation locates strong stations. Press again to stop searching. A station with a weak signal can be tuned manually. Note: During the search operation the sound level will be muted automatically. Program preset stations This unit is able to store 20 FM radio stations in memory. 1. Select a radio station either manually or by automatic search. 2. Press M button (4/R11) once, “MEMO” will flash and “01” will appear on display. 3. Press MEMO- / + button (9/10) to select a preset channel. 4. Press M button (4/R11) again to save the radio station in the selected preset channel. 5. Repeat steps 1-4 to store other stations.
GENERAL Power source Dimension
AC 100-240V ~ 50/60Hz DC 3V, 2x1.5V “AAA/R03/UM4” size batteries (not included) or equivalent for memory backup 359(W) x 130 (H)x 130(D) mm
TUNER Frequency range
FM: 87.5 - 108 MHz
SAFETY INSTRUCTION ATTENTION: To reduce the risk of electric shock, do not remove the cover or back. There are no user serviceable parts inside the unit. Refer all servicing to qualified personnel. The lightning flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.
Listening to the preset stations Press MEMO- (9/R13) or MEMO+ (10/R14) button directly to select a preset station. NOTE: For a better reception in FM, extend the antenna. If a stereo broadcast is received, “((ST))” is displayed.
The exclamation point within the triangle is a warning sign alerting the user of important instructions accompanying the product.
AUXILIARY This unit includes the AUX IN jack (19) to allow you to connect external devices, such as MP3 player, and listen to the music of your external device through the speakers of this unit. 1. Connect the external device to the AUX IN jack (19) at the back of the unit. 2. Press STANDBY button (1/R1) to turn on the unit. 3. Press FUNCTION button (5/R2) to select AUXILIARY mode. The display indicates “AUX” 4. Start to play your auxiliary source. 5. Adjust the volume to desired level. 6. To stop playback, disconnect your external device from the AUX IN jack. VIDEO You can view the video from the iPod/iPhone/iPd on a TV by connecting it to your unit via the VIDEO OUT jack (18) at the back of unit. Use the cable with yellow plug of an AV cable to connect the composite video output of this unit to the video input of a TV/monitor. GB - 9
DS-2765B IB MUSE 001 REV0 GB.ind2
2
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. iPad is a trademark of Apple Inc. GB - 8
• The apparatus should not be exposed to dripping or splashing. • Ensure a minimum distance of 5cm around the apparatus for sufficient ventilation. • Do not place objects filled with liquids, such as vases, on the apparatus. • The rating plate is located on the bottom of unit. • Attention should be drawn to the environmental aspects of battery disposal. • Do not throw batteries in fire! • Battery shall not be exposed to excessive heat such as sunshine, fire or the like. • Excessive sound pressure from earphones and headphones can cause hearing loss. • Under the influence of electrical fast transient or/and electrostatic phenomenon, the product may malfunction and require user to power reset.
MAINTENANCE
AUDIO SECTION Power Consumption 2X3.5W Speaker Impedance 8 ohms
When you memorize a station on a preset, the previous station is erased and replaced by the new one.
CONNECTIONS
19
Cleaning Be sure to turn the unit off and disconnect the AC adaptor before maintaining the unit. - Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides. - Using solvents, abrasive or alcohol-based products risks damaging the appliance. - If an object or liquid enters inside the appliance, unplug it immediately and have it checked by an authorized engineer. If at any time in the future you should need to dispose of this product please note that Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.(Waste Electrical and Electronic Equipment Directive)
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS • Never use an AC adaptor that is damaged, route power lead in a safe manner and make sure it is not subjected to trapping or pinching. If the power lead is damaged refer to a qualified service agent. • Place the unit on a flat and even surface. • Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with a cloth, or by placing it on carpeting. • To avoid magnetized, do not place the unit near speaker or magnet. • Do not use this unit in direct sunlight or leave the unit in a closed automobile (or yacht, etc) where it would be exposed to high temperatures above 40°C. • It also should not be placed in temperatures less than 5°C or greater than 35°C. *Do not use the unit immediately after transportation from a cold place to a warm place, condensation problem may result. • The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains, etc. • No naked flame sources, such as lighted candles, should be placed on the apparatus. • The use of apparatus in moderate climates.
GB - 10
GB - 11
2011-6-29
14:26:15
